A Survey of Techniques For Improving Energy Efficiency in Embedded Computing Systems

Recent technological advances have greatly improved the performance and features of embedded systems. With the number of just mobile devices now reaching nearly equal to the population of earth, embedded systems have truly become ubiquitous. These trends, however, have also made the task of managing their power consumption extremely challenging. In recent years, several techniques have been proposed to address this issue. In this paper, we survey the techniques for managing power consumption of embedded systems. We discuss the need of power management and provide a classification of the techniques on several important parameters to highlight their similarities and differences. This paper is intended to help the researchers and application-developers in gaining insights into the working of power management techniques and designing even more efficient high-performance embedded systems of tomorrow

Combined Time and Information Redundancy for SEU-Tolerance in Energy-Efficient Real-Time Systems

Recently the trade-off between energy consumption and fault-tolerance in real-time systems has been highlighted. These works have focused on dynamic voltage scaling (DVS) to reduce dynamic energy dissipation and on time redundancy to achieve transient-fault tolerance. While the time redundancy technique exploits the available slack time to increase the fault-tolerance by performing recovery executions, DVS exploits slack time to save energy. Therefore we believe there is a resource conflict between the time-redundancy technique and DVS. The first aim of this paper is to propose the usage of information redundancy to solve this problem. We demonstrate through analytical and experimental studies that it is possible to achieve both higher transient fault-tolerance (tolerance to single event upsets (SEU)) and less energy using a combination of information and time redundancy when compared with using time redundancy alone. The second aim of this paper is to analyze the interplay of transient-fault tolerance (SEU-tolerance) and adaptive body biasing (ABB) used to reduce static leakage energy, which has not been addressed in previous studies. We show that the same technique (i.e. the combination of time and information redundancy) is applicable to ABB-enabled systems and provides more advantages than time redundancy alone

Low-energy standby-sparing for hard real-time systems

Time-redundancy techniques are commonly used in real-time systems to achieve fault tolerance without incurring high energy overhead. However, reliability requirements of hard real-time systems that are used in safety-critical applications are so stringent that time-redundancy techniques are sometimes unable to achieve them. Standby sparing as a hardwareredundancy technique can be used to meet high reliability requirements of safety-critical applications. However, conventional standby-sparing techniques are not suitable for lowenergy hard real-time systems as they either impose considerable energy overheads or are not proper for hard timing constraints. In this paper we provide a technique to use standby sparing for hard real-time systems with limited energy budgets. The principal contribution of this work is an online energymanagement technique which is specifically developed for standby-sparing systems that are used in hard real-time applications. This technique operates at runtime and exploits dynamic slacks to reduce the energy consumption while guaranteeing hard deadlines. We compared the low-energy standby-sparing (LESS) system with a low-energy timeredundancy system (from a previous work). The results show that for relaxed time constraints, the LESS system is more reliable and provides about 26% energy saving as compared to the time-redundancy system. For tight deadlines when the timeredundancy system is not sufficiently reliable (for safety-critical application), the LESS system preserves its reliability but with about 49% more energy consumptio

New data structures, models, and algorithms for real-time resource management

Real-time resource management is the core and critical task in real-time systems. This dissertation explores new data structures, models, and algorithms for real-time resource management. At first, novel data structures, i.e., a class of Testing Interval Trees (TITs), are proposed to help build efficient scheduling modules in real-time systems. With a general data structure, i.e., the TIT* tree, the average costs of the schedulability tests in a wide variety of real-time systems can be reduced. With the Testing Interval Tree for Vacancy analysis (TIT-V), the complexities of the schedulability tests in a class of parallel/distributed real-time systems can be effectively reduced from 0(m²nlogn) to 0(mlogn+mlogm), where m is the number of processors and n is the number of tasks. Similarly, with the Testing Interval Tree for Release time and Laxity analysis (TIT-RL), the complexity of the online admission control in a uni-processor based real-time system can be reduced from 0(n²) to 0(nlogn), where n is the number of tasks. The TIT-RL tree can also be applied to a class of parallel/distributed real-time systems. Therefore, the TIT trees are effective approaches to efficient real-time scheduling modules. Secondly, a new utility accrual model, i.e., UAM+, is established for the resource management in real-time distributed systems. UAM+ is constructed based on the timeliness of computation and communication. Most importantly, the interplay between computation and communication is captured and characterized in the model. Under UAM+, resource managers are guided towards maximizing system-wide utility by exploring the interplay between computation and communication. This is in sharp contrast to traditional approaches that attempt to meet the timing constraints on computation and communication separately. To validate the effectiveness of UAM+, a resource allocation algorithm called IAUASA is developed. Simulation results reveal that IAUASA is far superior to two other resource allocation algorithms that are developed according to traditional utility accrual model and traditional idea. Furthermore, an online algorithm called IDRSA is also developed under UAM+, and a Dynamic Deadline Adjustment (DDA) technique is incorporated into IDRSA algorithm to explore the interplay between computation and communication. The simulation results show that the performance of IDRSA is very promising, especially when the interplay between computation and communication is tight. Therefore, the new utility accrual model provides a more effective approach to the resource allocation in distributed real-time systems. Thirdly, a general task model, which adapts the concept of calculus curve from the network calculus domain, is established for those embedded real-time systems with random event/task arrivals. Under this model, a prediction technique based on history window and calculus curves is established, and it provides the foundation for dynamic voltage-frequency scaling in those embedded real-time systems. Based on this prediction technique, novel energy-efficient algorithms that can dynamically adjust the operating voltage-frequency according to the predicted workload are developed. These algorithms aim to reduce energy consumption while meeting hard deadlines. They can accommodate and well adapt to the variation between the predicted and the actual arrivals of tasks as well as the variation between the predicted and the actual execution times of tasks. Simulation results validate the effectiveness of these algorithms in energy saving

Control-theoretic dynamic voltage scaling for embedded controllers

For microprocessors used in real-time embedded systems, minimizing power consumption is difficult due to the timing constraints. Dynamic voltage scaling (DVS) has been incorporated into modern microprocessors as a promising technique for exploring the trade-off between energy consumption and system performance. However, it remains a challenge to realize the potential of DVS in unpredictable environments where the system workload cannot be accurately known. Addressing system-level power-aware design for DVS-enabled embedded controllers, this paper establishes an analytical model for the DVS system that encompasses multiple real-time control tasks. From this model, a feedback control based approach to power management is developed to reduce dynamic power consumption while achieving good application performance. With this approach, the unpredictability and variability of task execution times can be attacked. Thanks to the use of feedback control theory, predictable performance of the DVS system is achieved, which is favorable to real-time applications. Extensive simulations are conducted to evaluate the performance of the proposed approach.Comment: Accepted for publication in IET Computers and Digital Techniques. doi:10.1049/iet-cdt:2007011

A survey of offline algorithms for energy minimization under deadline constraints

Modern computers allow software to adjust power management settings like speed and sleep modes to decrease the power consumption, possibly at the price of a decreased performance. The impact of these techniques mainly depends on the schedule of the tasks. In this article, a survey on underlying theoretical results on power management, as well as offline scheduling algorithms that aim at minimizing the energy consumption under real-time constraints, is given