Cognitive radio-enabled Internet of Vehicles (IoVs): a cooperative spectrum sensing and allocation for vehicular communication

Internet of Things (IoTs) era is expected to empower all aspects of Intelligent Transportation System (ITS) to improve transport safety and reduce road accidents. US Federal Communication Commission (FCC) officially allocated 75MHz spectrum in the 5.9GHz band to support vehicular communication which many studies have found insufficient. In this paper, we studied the application of Cognitive Radio (CR) technology to IoVs in order to increase the spectrum resource opportunities available for vehicular communication, especially when the officially allocated 75MHz spectrum in 5.9GHz band is not enough due to high demands as a result of increasing number of connected vehicles as already foreseen in the near era of IoTs. We proposed a novel CR Assisted Vehicular NETwork (CRAVNET) framework which empowers CR enabled vehicles to make opportunistic usage of licensed spectrum bands on the highways. We also developed a novel co-operative three-state spectrum sensing and allocation model which makes CR vehicular secondary units (SUs) aware of additional spectrum resources opportunities on their current and future positions and applies optimal sensing node allocation algorithm to guarantee timely acquisition of the available channels within a limited sensing time. The results of the theoretical analyses and simulation experiments have demonstrated that the proposed model can significantly improve the performance of a cooperative spectrum sensing and provide vehicles with additional spectrum opportunities without harmful interference against the Primary Users (PUs) activities

SAI: safety application identifier algorithm at MAC layer for vehicular safety message dissemination over LTE VANET networks

Vehicular safety applications have much significance in preventing road accidents and fatalities. Among others, cellular networks have been under investigation for the procurement of these applications subject to stringent requirements for latency, transmission parameters, and successful delivery of messages. Earlier contributions have studied utilization of Long-Term Evolution (LTE) under single cell, Friis radio, or simplified higher layer. In this paper, we study the utilization of LTE under multicell and multipath fading environment and introduce the use of adaptive awareness range. Then, we propose an algorithm that uses the concept of quality of service (QoS) class identifiers (QCIs) along with dynamic adaptive awareness range. Furthermore, we investigate the impact of background traffic on the proposed algorithm. Finally, we utilize medium access control (MAC) layer elements in order to fulfill vehicular application requirements through extensive system-level simulations. The results show that, by using an awareness range of up to 250 m, the LTE system is capable of fulfilling the safety application requirements for up to 10 beacons/s with 150 vehicles in an area of 2 × 2 km2. The urban vehicular radio environment has a significant impact and decreases the probability for end-to-end delay to be ≤100 ms from 93%–97% to 76%–78% compared to the Friis radio environment. The proposed algorithm reduces the amount of vehicular application traffic from 21 Mbps to 13 Mbps, while improving the probability of end-to-end delay being ≤100 ms by 20%. Lastly, use of MAC layer control elements brings the processing of messages towards the edge of network increasing capacity of the system by about 50%

Optimised protocols for time-critical applications and internetworking in wehicular ad-hoc networks

Vehicular ad-hoc networks (VANETs) that enable communication among vehicles and between vehicles and unmanned aerial vehicles (UAVs) and cellular base stations have recently attracted significant interest from the research community, due to the wide range of practical applications they can facilitate (e.g., road safety, traffic management and rescue missions). Despite this increased research activity, the high vehicle mobility in a VANET raises concerns regarding the robustness and adaptiveness of such networks to support time-critical applications and internetworking. In this thesis, as a first step toward the design of efficient MAC protocol to support time-critical applications and internetworking, we show that it is indeed possible to follow the dynamics of a network and consequently adapt the transmission probability of the Aloha protocol to reduce the interference and maximise the single-hop throughput between adjacent nodes. Extensive simulation validates the proposed analytical model, which thus can serve as a promising tool to improve VANETs performance. By exploiting the parallel between the CSMA/CA and Aloha performance models, the optimal transmission probability for the Aloha protocol as a function of estimated vehicular density is derived. This probability is then used to obtain the optimal maximum CW that can be integrated in an amended CSMA/CA protocol to maximise the single-hop throughput among adjacent vehicles. We show by means of simulation that the beneficial impact the proposed protocol is increased channel throughput and reduced transmission delay when compared with the standardised protocol CSMA/CA in IEEE 802.11p. These results reveal the applicability of the new, optimised protocol to safety applications and clustering techniques with stringent performance requirements. Lastly, we propose a Stable Clustering Algorithm for vehicular ad-hoc networks (SCalE) internetworking. The exchange of the necessary status information to support the efficient clusters formation can firmly relay on the support of our optimised CSMA/CA protocol. The SCalE algorithm makes use of the knowledge of the vehicles behaviour (explained in Chapter 5) for efficient selection of CHs, and selects a backup CH on top of the CH to maintain the stability of cluster structures. The increased stability and improved performance of the SCalE algorithm is studied and compared with existing clustering algorithms.Open Acces

TDMA Slot Reservation in Cluster-Based VANETs

Vehicular Ad Hoc Networks (VANETs) are a form of Mobile Ad Hoc Networks (MANETs) in which vehicles on the road form the nodes of the network. VANETs provide several services to enhance the safety and comfort of drivers and passengers. These services can be obtained by the wireless exchange of information among the vehicles driving on the road. In particular, the transmission of two different types of messages, safety/update and non-safety messages. The transmission of safety/update message aims to inform the nearby vehicles about the sender\u27s current status and/or a detected dangerous situation. This type of transmission is designed to help in accident and danger avoidance. Moreover, it requires high message generated rate and high reliability. On the other hand, the transmission of non-safety message aims to increase the comfort on vehicles by supporting several non-safety services, from notifications of traffic conditions to file sharing. Unfortunately, the transmission of non-safety message has less priority than safety messages, which may cause shutting down the comfort services. The goal of this dissertation is to design a MAC protocol in order to provide the ability of the transmission of non-safety message with little impact on the reliability of transmitting safety message even if the traffic and communication densities are high. VANET is a highly dynamic network. With lack of specialized hardware for infrastructure and the mobility to support network stability and channel utilization, acluster-based MAC protocol is needed to solve these overcomes. This dissertation makes the following contributions: 1. A multi-channel cluster-based TDMA MAC protocol to coordinate intracluster communications (TC-MAC) 2. A CH election and cluster formation algorithm based on the traffic flow and a cluster maintenance algorithm that benefits from our cluster formation algorithm 3. A multi-channel cluster-based CDNIA/TDMA hybrid MAC protocol to coordinate inter-cluster communications I will show that TC-MAC provides better performance than the current WAVE standard in terms of safety/update message reliability and non-safety message delivery. Additionally, I will show that my clustering and cluster maintenance protocol provides more stable clusters, which will reduce the overhead of clusterhead election and re-clustering and leads to an efficient hierarchical network topology

Adjacent Channel Interference Aware Joint Scheduling and Power Control for V2V Broadcast Communication

IEEE This paper proposes scheduling and power control schemes to mitigate the impact of both co-channel interference (CCI) and adjacent channel interference (ACI) on direct vehicle-to-vehicle broadcast communication. The objective is to maximize the number of vehicles that can communicate with the prescribed requirement on latency and reliability. The joint scheduling and power control problem is formulated as a mixed Boolean linear programming (MBLP) problem. A column generation method is proposed to reduce the computational complexity of the joint problem. From the joint problem, we formulate a scheduling-alone problem (given a power allocation) as a Boolean linear programming (BLP) problem and a power control-alone problem (given a schedule) as an MBLP problem. The scheduling problem is numerically sensitive due to the high dynamic range of channel values and adjacent channel interference ratio (ACIR) values. Therefore, a novel sensitivity reduction technique, which can compute a numerically stable optimal solution at the price of increased computational complexity, is proposed. Numerical results show that ACI, just as CCI, is a serious problem in direct vehicle-to-vehicle (V2V) communication due to near-far situations and hence should not be ignored, and its impact can be reduced by proper scheduling and power control

Performance improvement in mobile ad-hoc networks.

The objective of this research is to enhance the network performance under realistic mobile ad-hoc networks environments without modification of the standard. Overview of this research is summarized as follows: First, a packet-fragmentation technique to improve network throughput under the worst channel conditions is proposed. While the conventional packet-fragmentation technique research focuses only on random-bit errors, the proposed technique employs both random bit errors and hidden-node collisions. The analytical models based on Markov-chain model shows that the optimal fragmentation technique can effectively reduce the number of retransmissions caused by both collisions from hidden nodes and corrupted packets by random bit errors, and eventually improving throughput in noisy VANETs channels. As a second contribution, a dynamic service-channel allocation (DSCA) scheme is proposed to maximize the network throughput by dynamically assigning different service channels to the users. The theoretical analysis in this thesis will consider wireless access in the vehicular environment (WAVE) protocol, which is the main characteristic of the vehicular ad-hoc networks standard (the IEEE 802.11p). To summarize, the main contribution of this research is that two schemes will improve the network throughput significantly without modification of the standard. Therefore, there is no implementation issue to deploy the proposed schemes in real devices.PhDCommittee Chair: Copeland, John; Committee Co-Chair: Chang, Yusun; Committee Member: Ammar, Mostafa; Committee Member: Beyah, Raheem; Committee Member: Owen, Henry; Committee Member: Taylor, Davi