48,457 research outputs found
Fuzzy-logic-based control, filtering, and fault detection for networked systems: A Survey
This paper is concerned with the overview of the recent progress in fuzzy-logic-based filtering, control, and fault detection problems. First, the network technologies are introduced, the networked control systems are categorized from the aspects of fieldbuses and industrial Ethernets, the necessity of utilizing the fuzzy logic is justified, and the network-induced phenomena are discussed. Then, the fuzzy logic control strategies are reviewed in great detail. Special attention is given to the thorough examination on the latest results for fuzzy PID control, fuzzy adaptive control, and fuzzy tracking control problems. Furthermore, recent advances
on the fuzzy-logic-based filtering and fault detection problems are reviewed. Finally, conclusions are given and some possible future research directions are pointed out, for example, topics on two-dimensional networked systems, wireless networked control systems, Quality-of-Service (QoS) of networked systems, and fuzzy access control in open networked systems.This work was supported in part by the National Natural Science Foundation of China under Grants 61329301,
61374039, 61473163, and 61374127, the Hujiang Foundation of China under Grants C14002 andD15009, the Engineering and Physical Sciences Research Council (EPSRC) of the UK, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany
Supervised Control of a Flying Performing Robot using its Intrinsic Sound
We present the current results of our ongoing research in achieving efficient control of a flying robot for a wide variety of possible applications. A lightweight small indoor helicopter has been equipped with an embedded system and relatively simple sensors to achieve autonomous stable flight. The controllers have been tuned using genetic algorithms to further enhance flight stability. A number of additional sensors would need to be attached to the helicopter to enable it to sense more of its environment such as its current location or the location of obstacles like the walls of the room it is flying in. The lightweight nature of the helicopter very much restricts the amount of sensors that can be attached to it. We propose utilising the intrinsic sound signatures of the helicopter to locate it and to extract features about its current state, using another supervising robot. The analysis of this information is then sent back to the helicopter using an uplink to enable the helicopter to further stabilise its flight and correct its position and flight path without the need for additional sensors
Recommended from our members
Data-dependent cycle-accurate power modeling of RTL-level IPs using machine learning
In a chip design project, early design planning has a strong impact on the schedule and the cost of design. Power estimation is part of early design planning, and it greatly affects design decisions. Power modeling performed at a high level of abstraction is fast but inaccurate due to lack of circuit switching activity information. By contrast, power modeling performed at a low level of abstraction is more accurate as the synthesized circuit synthesis is known, but this simulation is typically slow. This report explores a power modeling approach performed at register transfer level (RTL). It exploits machine learning models in order to have a fast yet relatively accurate cycle-by-cycle power estimation. The approach is data-dependent, where cycle-specific models are trained based on the switching activity of signals obtained from RTL simulation and cycle-by-cycle power values obtained from a reference gate-level simulation of an existing RTL design. Therefore, if any changes are applied to the RTL design, re-training of models is required. The approach aims at obtaining fast yet accurate power predictions for new invocations of a given trained model using signal activity information collected during simulation of the unmodified RTL. At a low level, the complete visibility of signals in a design unintuitively might cause overtraining the model leading to inaccurate estimation. The suggested model employs automatic feature selection in each cycle. Based on the invocations used to train the cycle-by-cycle models, only signals that may switch during a given cycle will be selected as the features for their respective cycle-specific model. The method was tested on an 8-by-8 DCT design and the power estimates were within 6.5% of those from a commercial power analysis tool. This report also simulates and compares the approach of cycle-specific models to the approach of a single global model for all cycles and show that the cycle-specific approach is twice as accurate.Electrical and Computer Engineerin
Statistical Reliability Estimation of Microprocessor-Based Systems
What is the probability that the execution state of a given microprocessor running a given application is correct, in a certain working environment with a given soft-error rate? Trying to answer this question using fault injection can be very expensive and time consuming. This paper proposes the baseline for a new methodology, based on microprocessor error probability profiling, that aims at estimating fault injection results without the need of a typical fault injection setup. The proposed methodology is based on two main ideas: a one-time fault-injection analysis of the microprocessor architecture to characterize the probability of successful execution of each of its instructions in presence of a soft-error, and a static and very fast analysis of the control and data flow of the target software application to compute its probability of success. The presented work goes beyond the dependability evaluation problem; it also has the potential to become the backbone for new tools able to help engineers to choose the best hardware and software architecture to structurally maximize the probability of a correct execution of the target softwar
Particle Computation: Complexity, Algorithms, and Logic
We investigate algorithmic control of a large swarm of mobile particles (such
as robots, sensors, or building material) that move in a 2D workspace using a
global input signal (such as gravity or a magnetic field). We show that a maze
of obstacles to the environment can be used to create complex systems. We
provide a wide range of results for a wide range of questions. These can be
subdivided into external algorithmic problems, in which particle configurations
serve as input for computations that are performed elsewhere, and internal
logic problems, in which the particle configurations themselves are used for
carrying out computations. For external algorithms, we give both negative and
positive results. If we are given a set of stationary obstacles, we prove that
it is NP-hard to decide whether a given initial configuration of unit-sized
particles can be transformed into a desired target configuration. Moreover, we
show that finding a control sequence of minimum length is PSPACE-complete. We
also work on the inverse problem, providing constructive algorithms to design
workspaces that efficiently implement arbitrary permutations between different
configurations. For internal logic, we investigate how arbitrary computations
can be implemented. We demonstrate how to encode dual-rail logic to build a
universal logic gate that concurrently evaluates and, nand, nor, and or
operations. Using many of these gates and appropriate interconnects, we can
evaluate any logical expression. However, we establish that simulating the full
range of complex interactions present in arbitrary digital circuits encounters
a fundamental difficulty: a fan-out gate cannot be generated. We resolve this
missing component with the help of 2x1 particles, which can create fan-out
gates that produce multiple copies of the inputs. Using these gates we provide
rules for replicating arbitrary digital circuits.Comment: 27 pages, 19 figures, full version that combines three previous
conference article
- …