2,439 research outputs found
An Energy Aware and Secure MAC Protocol for Tackling Denial of Sleep Attacks in Wireless Sensor Networks
Wireless sensor networks which form part of the core for the Internet of Things consist of resource constrained sensors that are usually powered by batteries. Therefore, careful
energy awareness is essential when working with these devices.
Indeed,the introduction of security techniques such as authentication and encryption, to ensure confidentiality and integrity of data, can place higher energy load on the sensors. However, the absence of security protection c ould give room for energy drain attacks such as denial of sleep attacks which have a higher negative impact on the life span ( of the sensors than the presence of security features.
This thesis, therefore, focuses on tackling denial of sleep attacks from two perspectives A security perspective and an energy efficiency perspective. The security perspective involves evaluating and ranking a number of security based techniques to curbing denial of sleep attacks. The energy efficiency perspective, on the other hand, involves exploring duty cycling and simulating three Media Access Control ( protocols Sensor MAC, Timeout MAC andTunableMAC under different network sizes and measuring different parameters such as the Received Signal Strength RSSI) and Link Quality Indicator ( Transmit power, throughput and energy efficiency Duty cycling happens to be one of the major techniques for conserving energy in wireless sensor networks and this research aims to answer questions with regards to the effect of duty cycles on the energy efficiency as well as the throughput of three duty cycle protocols Sensor MAC ( Timeout MAC ( and TunableMAC in addition to creating a novel MAC protocol that is also more resilient to denial of sleep a ttacks than existing protocols.
The main contributions to knowledge from this thesis are the developed framework used for evaluation of existing denial of sleep attack solutions and the algorithms which fuel the other contribution to knowledge a newly developed protocol tested on the Castalia Simulator on the OMNET++ platform. The new protocol has been compared with existing protocols and
has been found to have significant improvement in energy efficiency and also better resilience to denial of sleep at tacks Part of this research has been published Two conference
publications in IEEE Explore and one workshop paper
A cross layer multi hop network architecture for wireless Ad Hoc networks
In this paper, a novel decentralized cross-layer multi-hop cooperative network architecture is presented. Our architecture involves the design of a simple yet efficient cooperative flooding scheme,two decentralized opportunistic cooperative forwarding mechanisms as well as the design of Routing
Enabled Cooperative Medium Access Control (RECOMAC) protocol that spans and incorporates the physical, medium access control (MAC) and routing layers for improving the performance of multihop communication. The proposed architecture exploits randomized coding at the physical layer to realize cooperative diversity. Randomized coding alleviates relay selection and actuation mechanisms,and therefore reduces the coordination among the relays. The coded packets are forwarded via opportunistically formed cooperative sets within a region, without communication among the relays and without establishing a prior route. In our architecture, routing layer functionality is submerged into the
MAC layer to provide seamless cooperative communication while the messaging overhead to set up routes, select and actuate relays is minimized. RECOMAC is shown to provide dramatic performance improvements, such as eight times higher throughput and ten times lower end-to-end delay as well as reduced overhead, as compared to networks based on well-known IEEE 802.11 and Ad hoc On Demand
Distance Vector (AODV) protocols
RECOMAC: a cross-layer cooperative network protocol for wireless ad hoc networks
A novel decentralized cross-layer multi-hop cooperative protocol, namely, Routing Enabled Cooperative Medium Access Control (RECOMAC) is proposed for wireless ad hoc networks. The protocol architecture makes use of cooperative
forwarding methods, in which coded packets are forwarded via opportunistically formed cooperative sets within a region, as RECOMAC spans the physical, medium access control (MAC) and routing layers. Randomized coding is exploited at the physical layer to realize cooperative transmissions, and cooperative forwarding is implemented for routing functionality, which is submerged into the MAC layer, while the overhead for MAC and route set up is minimized. RECOMAC is shown to provide dramatic performance improvements of eight times higher throughput and one tenth of end-to-end delay than that of the conventional architecture in practical wireless mesh networks
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
Transmission Delay of Multi-hop Heterogeneous Networks for Medical Applications
Nowadays, with increase in ageing population, Health care market keeps
growing. There is a need for monitoring of Health issues. Body Area Network
consists of wireless sensors attached on or inside human body for monitoring
vital Health related problems e.g, Electro Cardiogram (ECG),
ElectroEncephalogram (EEG), ElectronyStagmography(ENG) etc. Data is recorded by
sensors and is sent towards Health care center. Due to life threatening
situations, timely sending of data is essential. For data to reach Health care
center, there must be a proper way of sending data through reliable connection
and with minimum delay. In this paper transmission delay of different paths,
through which data is sent from sensor to Health care center over heterogeneous
multi-hop wireless channel is analyzed. Data of medical related diseases is
sent through three different paths. In all three paths, data from sensors first
reaches ZigBee, which is the common link in all three paths. After ZigBee there
are three available networks, through which data is sent. Wireless Local Area
Network (WLAN), Worldwide Interoperability for Microwave Access (WiMAX),
Universal Mobile Telecommunication System (UMTS) are connected with ZigBee.
Each network (WLAN, WiMAX, UMTS) is setup according to environmental
conditions, suitability of device and availability of structure for that
device. Data from these networks is sent to IP-Cloud, which is further
connected to Health care center. Main aim of this paper is to calculate delay
of each link in each path over multihop wireless channel.Comment: BioSPAN with 7th IEEE International Conference on Broadband and
Wireless Computing, Communication and Applications (BWCCA 2012), Victoria,
Canada, 201
- …