Aperiodic Array Synthesis for Multi-User MIMO Applications

This paper demonstrates the advantages of aperiodic arrays in multi-user multiple-input multiple-output systems for future mobile communication applications. We propose a novel aperiodic array synthesis method which account for the statistics of the propagation channel and the adaptive beamforming algorithm. Clear performance gains in line-of-sight dominated propagation environments are achieved in terms of the signal-to-interference-plus-noise ratio, the sum rate capacity, as well as the spread of the amplifier output power as compared to their regular counterparts. We also show that the performance is not sacrificed in rich scattering environments. Hence, aperiodic array layouts can provide performance gains in millimeter-wave applications with a dominating line-of-sight component.Comment: Manuscript submitted to IEEE Trans. Antennas Propag. on March 18, 2017; published and defended as part of the PhD dissertation Aperiodic Array Synthesis for Telecommunications on May 31, 2017, Goteborg, Sweden, candidate: Carlo Bencivenni, Chalmers University of Technology, faculty opponent: Andrea Massa, ELEDIA cente

Reconfigurable Intelligent Surfaces for Wireless Communications: Principles, Challenges, and Opportunities

Recently there has been a flurry of research on the use of reconfigurable intelligent surfaces (RIS) in wireless networks to create smart radio environments. In a smart radio environment, surfaces are capable of manipulating the propagation of incident electromagnetic waves in a programmable manner to actively alter the channel realization, which turns the wireless channel into a controllable system block that can be optimized to improve overall system performance. In this article, we provide a tutorial overview of reconfigurable intelligent surfaces (RIS) for wireless communications. We describe the working principles of reconfigurable intelligent surfaces (RIS) and elaborate on different candidate implementations using metasurfaces and reflectarrays. We discuss the channel models suitable for both implementations and examine the feasibility of obtaining accurate channel estimates. Furthermore, we discuss the aspects that differentiate RIS optimization from precoding for traditional MIMO arrays highlighting both the arising challenges and the potential opportunities associated with this emerging technology. Finally, we present numerical results to illustrate the power of an RIS in shaping the key properties of a MIMO channel.Comment: to appear in the IEEE Transactions on Cognitive Communications and Networking (TCCN

Reconfigurable Antennas in mmWave MIMO Systems

The key obstacle to achieving the full potential of the millimeter wave (mmWave) band has been the poor propagation characteristics of wireless signals in this band. One approach to overcome this issue is to use antennas that can support higher gains while providing beam adaptability and diversity, i.e., reconfigurable antennas. In this article, we present a new architecture for mmWave multiple-input multiple-output (MIMO) communications that uses a new class of reconfigurable antennas. More specifically, the proposed lens-based antennas can support multiple radiation patterns while using a single radio frequency chain. Moreover, by using a beam selection network, each antenna beam can be steered in the desired direction. Further, using the proposed reconfigurable antenna in a MIMO architecture, we propose a new signal processing algorithm that uses the additional degrees of freedom provided by the antennas to overcome propagation issues at mmWave frequencies. Our simulation results show that the proposed reconfigurable antenna MIMO architecture significantly enhances the performance of mmWave communication systems

Dynamic Time-domain Duplexing for Self-backhauled Millimeter Wave Cellular Networks

Millimeter wave (mmW) bands between 30 and 300 GHz have attracted considerable attention for next-generation cellular networks due to vast quantities of available spectrum and the possibility of very high-dimensional antenna ar-rays. However, a key issue in these systems is range: mmW signals are extremely vulnerable to shadowing and poor high-frequency propagation. Multi-hop relaying is therefore a natural technology for such systems to improve cell range and cell edge rates without the addition of wired access points. This paper studies the problem of scheduling for a simple infrastructure cellular relay system where communication between wired base stations and User Equipment follow a hierarchical tree structure through fixed relay nodes. Such a systems builds naturally on existing cellular mmW backhaul by adding mmW in the access links. A key feature of the proposed system is that TDD duplexing selections can be made on a link-by-link basis due to directional isolation from other links. We devise an efficient, greedy algorithm for centralized scheduling that maximizes network utility by jointly optimizing the duplexing schedule and resources allocation for dense, relay-enhanced OFDMA/TDD mmW networks. The proposed algorithm can dynamically adapt to loading, channel conditions and traffic demands. Significant throughput gains and improved resource utilization offered by our algorithm over the static, globally-synchronized TDD patterns are demonstrated through simulations based on empirically-derived channel models at 28 GHz.Comment: IEEE Workshop on Next Generation Backhaul/Fronthaul Networks - BackNets 201

Frame Structure Design and Analysis for Millimeter Wave Cellular Systems

The millimeter-wave (mmWave) frequencies have attracted considerable attention for fifth generation (5G) cellular communication as they offer orders of magnitude greater bandwidth than current cellular systems. However, the medium access control (MAC) layer may need to be significantly redesigned to support the highly directional transmissions, ultra-low latencies and high peak rates expected in mmWave communication. To address these challenges, we present a novel mmWave MAC layer frame structure with a number of enhancements including flexible, highly granular transmission times, dynamic control signal locations, extended messaging and ability to efficiently multiplex directional control signals. Analytic formulae are derived for the utilization and control overhead as a function of control periodicity, number of users, traffic statistics, signal-to-noise ratio and antenna gains. Importantly, the analysis can incorporate various front-end MIMO capability assumptions -- a critical feature of mmWave. Under realistic system and traffic assumptions, the analysis reveals that the proposed flexible frame structure design offers significant benefits over designs with fixed frame structures similar to current 4G long-term evolution (LTE). It is also shown that fully digital beamforming architectures offer significantly lower overhead compared to analog and hybrid beamforming under equivalent power budgets.Comment: Submitted to IEEE Transactions for Wireless Communication