9,461 research outputs found
Improving elevation resolution in phased-array inspections for NDT
The Phased Array Ultrasonic Technique (PAUT) offers great advantages over the conventional ultrasound technique (UT), particularly because of beam focusing, beam steering and electronic scanning capabilities. However, the 2D images obtained have usually low resolution in the direction perpendicular to the array elements, which limits the inspection quality of large components by mechanical scanning. This paper describes a novel approach to improve image quality in these situations, by combining three ultrasonic techniques: Phased Array with dynamic depth focusing in reception, Synthetic Aperture Focusing Technique (SAFT) and Phase Coherence Imaging (PCI). To be applied with conventional NDT arrays (1D and non-focused in elevation) a special mask to produce a wide beam in the movement direction was designed and analysed by simulation and experimentally. Then, the imaging algorithm is presented and validated by the inspection of test samples. The obtained images quality is comparable to that obtained with an equivalent matrix array, but using conventional NDT arrays and equipments, and implemented in real time.Fil: Brizuela, Jose David. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Camacho, J.. Consejo Superior de Investigaciones Científicas; EspañaFil: Cosarinsky, Guillermo Gerardo. Comisión Nacional de Energía Atómica; ArgentinaFil: Iriarte, Juan Manuel. Comisión Nacional de Energía Atómica; ArgentinaFil: Cruza, Jorge F.. Consejo Superior de Investigaciones Científicas; Españ
The Future of High Frequency Circuit Design
The cut-off wavelengths of integrated silicon transistors have
exceeded the die sizes of the chips being fabricated with them.
Combined with the ability to integrate billions of transistors on
the same die, this size-wavelength cross-over has produced a
unique opportunity for a completely new class of holistic circuit
design combining electromagnetics, device physics, circuits, and
communication system theory in one place. In this paper, we discuss
some of these opportunities and their associated challenges
in greater detail and provide a few of examples of how they can
be used in practice
An Integrated Subharmonic Coupled-Oscillator Scheme for a 60-GHz Phased-Array Transmitter
This paper describes the design of an integrated coupled-oscillator array in SiGe for millimeter-wave applications. The design focuses on a scalable radio architecture where multiple dies are tiled to form larger arrays. A 2 × 2 oscillator array for a 60-GHz transmitter is fabricated with integrated power amplifiers and on-chip antennas. To lock between multiple dies, an injection-locking scheme appropriate for wire-bond interconnects is described. The 2 × 2 array demonstrates a 200–MHz locking range and 1 × 4 array formed by two adjacent chips has a 60-MHz locking range. The phase noise of the coupled oscillators is below 100 dBc/Hz at a 1-MHz offset when locked to an external reference. To the best of the authors’ knowledge, this is the highest frequency demonstration of coupled oscillators fabricated in a conventional silicon integrated-circuit process
A Fully Integrated 24-GHz Eight-Element Phased-Array Receiver in Silicon
This paper reports the first fully integrated 24-GHz eight-element phased-array receiver in a SiGe BiCMOS technology. The receiver utilizes a heterodyne topology and the signal combining is performed at an IF of 4.8 GHz. The phase-shifting with 4 bits of resolution is realized at the LO port of the first down-conversion mixer. A ring LC voltage-controlled oscillator (VCO) generates 16 different phases of the LO. An integrated 19.2-GHz frequency synthesizer locks the VCO frequency to a 75-MHz external reference. Each signal path achieves a gain of 43 dB, a noise figure of 7.4 dB, and an IIP3 of -11 dBm. The eight-path array achieves an array gain of 61 dB and a peak-to-null ratio of 20 dB and improves the signal-to-noise ratio at the output by 9 dB
A 24-GHz SiGe Phased-Array Receiver—LO Phase-Shifting Approach
A local-oscillator phase-shifting approach is introduced to implement a fully integrated 24-GHz phased-array receiver using an SiGe technology. Sixteen phases of the local oscillator are generated in one oscillator core, resulting in a raw beam-forming accuracy of 4 bits. These phases are distributed to all eight receiving paths of the array by a symmetric network. The appropriate phase for each path is selected using high-frequency analog multiplexers. The raw beam-steering resolution of the array is better than 10 [degrees] for a forward-looking angle, while the array spatial selectivity, without any amplitude correction, is better than 20 dB. The overall gain of the array is 61 dB, while the array improves the input signal-to-noise ratio by 9 dB
Conformal Antenna Array for Millimeter-Wave Communications: Performance Evaluation
In this paper, we study the influence of the radius of a cylindrical
supporting structure on radiation properties of a conformal millimeter-wave
antenna array. Bent antenna array structures on cylindrical surfaces may have
important applications in future mobile devices. Small radii may be needed if
the antenna is printed on the edges of mobile devices and in items which human
beings are wearing, such as wrist watches, bracelets and rings. The antenna
under study consists of four linear series-fed arrays of four patch elements
and is operating at 58.8 GHz with linear polarization. The antenna array is
fabricated on polytetrafluoroethylene substrate with thickness of 0.127 mm due
to its good plasticity properties and low losses. Results for both planar and
conformal antenna arrays show rather good agreement between simulation and
measurements. The results show that conformal antenna structures allow
achieving large angular coverage and may allow beam-steering implementations if
switches are used to select between different arrays around a cylindrical
supporting structure.Comment: Keywords: conformal antenna, millimeter-wave communications, patch
antenna array. 11 pages, 10 figures, 1 tabl
Recommended from our members
Metascreen-Based Acoustic Passive Phased Array
Conventional phased arrays require a large number of sources in forming a complex wave front, resulting in complexity and a high cost to operate the individual sources. We present a passive phased array using an acoustic metascreen that transmits sound energy from a single source and steers the transmitted wave front to form the desired fields. The metascreen is composed of elements that have a discrete resolution along the screen at an order smaller than the wavelength, allowing for fine wave-front shaping beyond the paraxial approximation. The performance is verified in experiment by forming a self-bending beam. Our metascreen-based passive array with its simplicity and capability has applications in places where conventional active arrays are complex and have limitations.Acoustical Society of AmericaNational Basic Research Program of China (973 Program) 2010CB327803 2012CB921504National Natural Science Foundation of China 11174138 11174139 11222442 81127901 11274168Physic
A fully integrated 24-GHz phased-array transmitter in CMOS
This paper presents the first fully integrated 24-GHz phased-array transmitter designed using 0.18-/spl mu/m CMOS transistors. The four-element array includes four on-chip CMOS power amplifiers, with outputs matched to 50 /spl Omega/, that are each capable of generating up to 14.5 dBm of output power at 24 GHz. The heterodyne transmitter has a two-step quadrature up-conversion architecture with local oscillator (LO) frequencies of 4.8 and 19.2 GHz, which are generated by an on-chip frequency synthesizer. Four-bit LO path phase shifting is implemented in each element at 19.2 GHz, and the transmitter achieves a peak-to-null ratio of 23 dB with raw beam-steering resolution of 7/spl deg/ for radiation normal to the array. The transmitter can support data rates of 500 Mb/s on each channel (with BPSK modulation) and occupies 6.8 mm /spl times/ 2.1 mm of die area
- …