Energy efficiency of error correction on wireless systems

Since high error rates are inevitable to the wireless environment, energy-efficient error-control is an important issue for mobile computing systems. We have studied the energy efficiency of two different error correction mechanisms and have measured the efficiency of an implementation in software. We show that it is not sufficient to concentrate on the energy efficiency of error control mechanisms only, but the required extra energy consumed by the wireless interface should be incorporated as well. A model is presented that can be used to determine an energy-efficient error correction scheme of a minimal system consisting of a general purpose processor and a wireless interface. As an example we have determined these error correction parameters on two systems with a WaveLAN interfac

Lessons learned from the design of a mobile multimedia system in the Moby Dick project

Recent advances in wireless networking technology and the exponential development of semiconductor technology have engendered a new paradigm of computing, called personal mobile computing or ubiquitous computing. This offers a vision of the future with a much richer and more exciting set of architecture research challenges than extrapolations of the current desktop architectures. In particular, these devices will have limited battery resources, will handle diverse data types, and will operate in environments that are insecure, dynamic and which vary significantly in time and location. The research performed in the MOBY DICK project is about designing such a mobile multimedia system. This paper discusses the approach made in the MOBY DICK project to solve some of these problems, discusses its contributions, and accesses what was learned from the project

Design techniques for low-power systems

Portable products are being used increasingly. Because these systems are battery powered, reducing power consumption is vital. In this report we give the properties of low-power design and techniques to exploit them on the architecture of the system. We focus on: minimizing capacitance, avoiding unnecessary and wasteful activity, and reducing voltage and frequency. We review energy reduction techniques in the architecture and design of a hand-held computer and the wireless communication system including error control, system decomposition, communication and MAC protocols, and low-power short range networks

Design and Reliability Performance Evaluation of Network Coding Schemes for Lossy Wireless Networks

This thesis investigates lossy wireless networks, which are wireless communication networks consisting of lossy wireless links, where the packet transmission via a lossy wireless link is successful with a certain value of probability. In particular, this thesis analyses all-to-all broadcast in lossy wireless networks, where every node has a native packet to transmit to all other nodes in the network. A challenge of all-to-all broadcast in lossy wireless networks is the reliability, which is defined as the probability that every node in the network successfully obtains a copy of the native packets of all other nodes. In this thesis, two novel network coding schemes are proposed, which are the neighbour network coding scheme and the random neighbour network coding scheme. In the two proposed network coding schemes, a node may perform a bit-wise exclusive or (XOR) operation to combine the native packet of itself and the native packet of its neighbour, called the coding neighbour, into an XOR coded packet. The reliability of all-to-all broadcast under both the proposed network coding schemes is investigated analytically using Markov chains. It is shown that the reliability of all-to-all broadcast can be improved considerably by employing the proposed network coding schemes, compared with non-coded networks with the same link conditions, i.e. same probabilities of successful packet transmission via wireless channels. Further, the proposed schemes take the link conditions of each node into account to maximise the reliability of a given network. To be more precise, the first scheme proposes the optimal coding neighbour selection method while the second scheme introduces a tuning parameter to control the probability that a node performs network coding at each transmission. The observation that channel condition can have a significant impact on the performance of network coding schemes is expected to be applicable to other network coding schemes for lossy wireless networks

Design and Reliability Performance Evaluation of Network Coding Schemes for Lossy Wireless Networks

This thesis investigates lossy wireless networks, which are wireless communication networks consisting of lossy wireless links, where the packet transmission via a lossy wireless link is successful with a certain value of probability. In particular, this thesis analyses all-to-all broadcast in lossy wireless networks, where every node has a native packet to transmit to all other nodes in the network. A challenge of all-to-all broadcast in lossy wireless networks is the reliability, which is defined as the probability that every node in the network successfully obtains a copy of the native packets of all other nodes. In this thesis, two novel network coding schemes are proposed, which are the neighbour network coding scheme and the random neighbour network coding scheme. In the two proposed network coding schemes, a node may perform a bit-wise exclusive or (XOR) operation to combine the native packet of itself and the native packet of its neighbour, called the coding neighbour, into an XOR coded packet. The reliability of all-to-all broadcast under both the proposed network coding schemes is investigated analytically using Markov chains. It is shown that the reliability of all-to-all broadcast can be improved considerably by employing the proposed network coding schemes, compared with non-coded networks with the same link conditions, i.e. same probabilities of successful packet transmission via wireless channels. Further, the proposed schemes take the link conditions of each node into account to maximise the reliability of a given network. To be more precise, the first scheme proposes the optimal coding neighbour selection method while the second scheme introduces a tuning parameter to control the probability that a node performs network coding at each transmission. The observation that channel condition can have a significant impact on the performance of network coding schemes is expected to be applicable to other network coding schemes for lossy wireless networks

Energy-efficient wireless communication

In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters

The Octopus switch

This chapter1 discusses the interconnection architecture of the Mobile Digital Companion. The approach to build a low-power handheld multimedia computer presented here is to have autonomous, reconfigurable modules such as network, video and audio devices, interconnected by a switch rather than by a bus, and to offload as much as work as possible from the CPU to programmable modules placed in the data streams. Thus, communication between components is not broadcast over a bus but delivered exactly where it is needed, work is carried out where the data passes through, bypassing the memory. The amount of buffering is minimised, and if it is required at all, it is placed right on the data path, where it is needed. A reconfigurable internal communication network switch called Octopus exploits locality of reference and eliminates wasteful data copies. The switch is implemented as a simplified ATM switch and provides Quality of Service guarantees and enough bandwidth for multimedia applications. We have built a testbed of the architecture, of which we will present performance and energy consumption characteristics

Guard time optimisation and adaptation for energy efficient multi-hop TSCH networks

International audienceIn the IEEE 802.15.4-2015 standard, Time Slotted Channel Hopping (TSCH) aims to guarantee high-level network reliability by keeping nodes time-synchronised. In order to ensure successful communication between a sender and a receiver, the latter starts listening shortly before the expected time of a MAC layer frame's arrival. The offset between the time a node starts listening and the estimated time of frame arrival is called guard time and it aims to reduce the probability of missed frames due to clock drift. In this paper, we investigate the impact of the guard time on network performance. We identify that, when using the 6tisch minimal schedule, the most significant cause of energy consumption is idle listening during guard time. Therefore, we first perform mathematical modelling on a TSCH link to identify the guard time that maximises the energy-efficiency of the TSCH network in single hop topology. We then continue in multi-hop network, where we empirically adapt the guard time locally at each node depending its distance, in terms of hops, from the sink. Our performance evaluation results, conducted using the Contiki OS, demonstrate that the proposed decentralised guard time adaptation can reduce the energy consumption by up to 40%, without compromising network reliability

Coding in 802.11 WLANs

Forward error correction (FEC) coding is widely used in communication systems to correct transmis- sion errors. In IEEE 802.11a/g transmitters, convolutional codes are used for FEC at the physical (PHY) layer. As is typical in wireless systems, only a limited choice of pre-speci¯ed coding rates is supported. These are implemented in hardware and thus di±cult to change, and the coding rates are selected with point to point operation in mind. This thesis is concerned with using FEC coding in 802.11 WLANs in more interesting ways that are better aligned with application requirements. For example, coding to support multicast tra±c rather than simple point to point tra±c; coding that is cognisant of the multiuser nature of the wireless channel; and coding which takes account of delay requirements as well as losses. We consider layering additional coding on top of the existing 802.11 PHY layer coding, and investigate the tradeo® between higher layer coding and PHY layer modulation and FEC coding as well as MAC layer scheduling. Firstly we consider the joint multicast performance of higher-layer fountain coding concatenated with 802.11a/g OFDM PHY modulation/coding. A study on the optimal choice of PHY rates with and without fountain coding is carried out for standard 802.11 WLANs. We ¯nd that, in contrast to studies in cellular networks, in 802.11a/g WLANs the PHY rate that optimizes uncoded multicast performance is also close to optimal for fountain-coded multicast tra±c. This indicates that in 802.11a/g WLANs cross-layer rate control for higher-layer fountain coding concatenated with physical layer modulation and FEC would bring few bene¯ts. Secondly, using experimental measurements taken in an outdoor environment, we model the chan- nel provided by outdoor 802.11 links as a hybrid binary symmetric/packet erasure channel. This hybrid channel o®ers capacity increases of more than 100% compared to a conventional packet erasure channel (PEC) over a wide range of RSSIs. Based upon the established channel model, we further consider the potential performance gains of adopting a binary symmetric channel (BSC) paradigm for multi-destination aggregations in 802.11 WLANs. We consider two BSC-based higher-layer coding approaches, i.e. superposition coding and a simpler time-sharing coding, for multi-destination aggre- gated packets. The performance results for both unicast and multicast tra±c, taking account of MAC layer overheads, demonstrate that increases in network throughput of more than 100% are possible over a wide range of channel conditions, and that the simpler time-sharing approach yields most of these gains and have minor loss of performance. Finally, we consider the proportional fair allocation of high-layer coding rates and airtimes in 802.11 WLANs, taking link losses and delay constraints into account. We ¯nd that a layered approach of separating MAC scheduling and higher-layer coding rate selection is optimal. The proportional fair coding rate and airtime allocation (i) assigns equal total airtime (i.e. airtime including both successful and failed transmissions) to every station in a WLAN, (ii) the station airtimes sum to unity (ensuring operation at the rate region boundary), and (iii) the optimal coding rate is selected to maximise goodput (treating packets decoded after the delay deadline as losses)

Mobile IP movement detection optimisations in 802.11 wireless LANs

The IEEE 802.11 standard was developed to support the establishment of highly flexible wireless local area networks (wireless LANs). However, when an 802.11 mobile node moves from a wireless LAN on one IP network to a wireless LAN on a different network, an IP layer handoff occurs. During the handoff, the mobile node's IP settings must be updated in order to re-establish its IP connectivity at the new point of attachment. The Mobile IP protocol allows a mobile node to perform an IP handoff without breaking its active upper-layer sessions. Unfortunately, these handoffs introduce large latencies into a mobile node's traffic, during which packets are lost. As a result, the mobile node's upper-layer sessions and applications suffer significant disruptions due to this handoff latency. One of the main components of a Mobile IP handoff is the movement detection process, whereby a mobile node senses that it is attached to a new IP network. This procedure contributes significantly to the total Mobile IP handover latency and resulting disruption. This study investigates different mechanisms that aim to lower movement detection delays and thereby improve Mobile IP performance. These mechanisms are considered specifically within the context of 802.11 wireless LANs. In general, a mobile node detects attachment to a new network when a periodic IP level broadcast (advertisement) is received from that network. It will be shown that the elimination of this dependence on periodic advertisements, and the reliance instead on external information from the 802.11 link layer, results in both faster and more efficient movement detection. Furthermore, a hybrid system is proposed that incorporates several techniques to ensure that movement detection performs reliably within a variety of different network configurations. An evaluation framework is designed and implemented that supports the assessment of a wide range of movement detection mechanisms. This test bed allows Mobile IP handoffs to be analysed in detail, with specific focus on the movement detection process. The performance of several movement detection optimisations is compared using handoff latency and packet loss as metrics. The evaluation framework also supports real-time Voice over IP (VoIP) traffic. This is used to ascertain the effects that different movement detection techniques have on the output voice quality. These evaluations not only provide a quantitative performance analysis of these movement detection mechanisms, but also a qualitative assessment based on a VoIP application