Providing Delay Guarantees in Bluetooth

Bluetooth polling, also referred to as Bluetooth MAC scheduling or intra-piconet scheduling, is the mechanism that schedules the traffic between the participants in a Bluetooth network. Hence, this mechanism is highly determining with respect to the delay packets experience in a Bluetooth network. In this paper we present a polling mechanism that provides delay guarantees in an efficient manner and we evaluate this polling mechanism by means of simulation. It is shown that this polling mechanism is able to provide delay guarantees while saving as much as possible resources, which can be used for transmission of best effort traffic or for retransmission

Generalized multicarrier CDMA: Unification and linear equalization

Relying on block-symbol spreading and judicious design of user codes, this paper builds on the generalized multkarrier (GMC) quasisynchronous CDMA system that is capable of multiuser interference (MUI) elimination and intersymbol interference (ISI) suppression with guaranteed symbol recovery, regardless of the wireless frequency-selective channels. GMC-CDMA affords an all-digital unifying framework, which encompasses single-carrier and several multicarrier (MC) CDMA systems. Besides the unifying framework, it is shown that GMC-CDMA offers flexibility both in full load (maximum number of users allowed by the available bandwidth) and in reduced load settings. A novel blind channel estimation algorithm is also derived. Analytical evaluation and simulations illustrate the superior error performance and flexibility of uncoded GMC-CDMA over competing MC-CDMA alternatives especially in the presence of uplink multipath channels

Improving performance guarantees in wormhole mesh NoC designs

Wormhole-based mesh Networks-on-Chip (wNoC) are deployed in high-performance many-core processors due to their physical scalability and low-cost. Delivering tight and time composable Worst-Case Execution Time (WCET) estimates for applications as needed in safety-critical real-time embedded systems is challenged by wNoCs due to their distributed nature. We propose a bandwidth control mechanism for wNoCs that enables the computation of tight time-composable WCET estimates with low average performance degradation and high scalability. Our evaluation with the EEMBC automotive suite and an industrial real-time parallel avionics application confirms so.The research leading to these results is funded by the European Union Seventh Framework Programme under grant agreement no. 287519 (parMERASA) and by the Ministry of Science and Technology of Spain under contract TIN2012-34557. Milos Panic is funded by the Spanish Ministry of Education under the FPU grant FPU12/05966. Carles Hernández is jointly funded by the Spanish Ministry of Economy and Competitiveness and FEDER funds through grant TIN2014-60404-JIN. Jaume Abella is partially supported by the Ministry of Economy and Competitiveness under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717.Peer ReviewedPostprint (author's final draft

The Octopus switch

This chapter1 discusses the interconnection architecture of the Mobile Digital Companion. The approach to build a low-power handheld multimedia computer presented here is to have autonomous, reconfigurable modules such as network, video and audio devices, interconnected by a switch rather than by a bus, and to offload as much as work as possible from the CPU to programmable modules placed in the data streams. Thus, communication between components is not broadcast over a bus but delivered exactly where it is needed, work is carried out where the data passes through, bypassing the memory. The amount of buffering is minimised, and if it is required at all, it is placed right on the data path, where it is needed. A reconfigurable internal communication network switch called Octopus exploits locality of reference and eliminates wasteful data copies. The switch is implemented as a simplified ATM switch and provides Quality of Service guarantees and enough bandwidth for multimedia applications. We have built a testbed of the architecture, of which we will present performance and energy consumption characteristics

An Energy-Efficient Reconfigurable Circuit Switched Network-on-Chip

Network-on-Chip (NoC) is an energy-efficient on-chip communication architecture for multi-tile System-on-Chip (SoC) architectures. The SoC architecture, including its run-time software, can replace inflexible ASICs for future ambient systems. These ambient systems have to be flexible as well as energy-efficient. To find an energy-efficient solution for the communication network we analyze three wireless applications. Based on their communication requirements we observe that revisiting of the circuit switching techniques is beneficial. In this paper we propose a new energy-efficient reconfigurable circuit-switched Network-on-Chip. By physically separating the concurrent data streams we reduce the overall energy consumption. The circuit-switched router has been synthesized and analyzed for its power consumption in 0.13 ¿m technology. A 5-port circuit-switched router has an area of 0.05 mm2 and runs at 1075 MHz. The proposed architecture consumes 3.5 times less energy compared to its packet-switched equivalen

Virtual lines, a deadlock-free and real-time routing mechanism for ATM networks

In this paper, we present a routing mechanism and buffer allocation mechanism for an ATM switching fabric. Since the fabric will be used to transfer multimedia traffic, it should provide a guaranteed throughput and a bounded latency. We focus on the design of a suitable routing mechanism that is capable of fulfilling these requirements and is free of deadlocks. We will describe two basic concepts that can be used to implement deadlock-free routing. Routing of messages is closely related to buffering. We have organized the buffers into parallel FIFO's, each representing a virtual line. In this way, we not only have solved the problem of head of line blocking, but we can also give real-time guarantees. We will show that for local high-speed networks, it is more advantageous to have a proper flow control than to have large buffers. Although the virtual line concept can have a low buffer utilization, the transfer efficiency can be higher. The virtual line concept allows adaptive routing. The total throughput of the network can be improved by using alternative routes. Adaptive routing is attractive in networks where alternative routes are not much longer than the initial route(s). The network of the switching fabric is built up from switching elements interconnected in a Kautz topology

Virtual lines, a deadlock free and real-time routing mechanism for ATM networks

In this paper we present a routing mechanism and buffer allocation mechanism for an ATM switching fabric. Since the fabric will be used to transfer multimedia traffic it should provide a guaranteed throughput and a bounded latency. We focus on the design of a suitable routing mechanism that is capable to fulfil these requirements and is free of deadlocks. We will describe two basic concepts that can be used to implement deadlock free routing. Routing of messages is closely related to buffering. We have organized the buffers into parallel fifos, each representing a virtual line. In this way we not only have solved the problem of Head Of Line blocking, but we can also give real-time guarantees. We will show that for local high-speed networks it is more advantageous to have a proper flow control than to have large buffers. Although the virtual line concept can have a low buffer utilization, the transfer efficiency can be higher. The virtual lines concept allows adaptive routing. The total throughput of the network can be improved by using alternative routes. Adaptive routing is attractive in networks where alternative routes are not much longer than the initial route(s). The network of the switching fabric is built up from switching elements interconnected in a Kautz topology