Aging effects in automated face recognition

The main objective of this work was to analyze the effects of aging on the automated face recognition process. A dataset was used to perform experiments and obtain indicators to measure the impact of aging. To compare the effects of aging the dataset was segmented based on the age difference between the subjects’ face images. The image quality metrics were also part of the analysis performed in this study. The results of the experiments shown that the higher the gap between the images, the higher the error rates. These were the expected results and it is consistent with other experiments performed in the past. The False Rejection Rate (FRR) was measured at 1%, 0.1%, and 0.01% False Acceptance Rate (FAR) obtaining the similar output as the gap between the images increased

A survey of face recognition techniques under occlusion

The limited capacity to recognize faces under occlusions is a long-standing problem that presents a unique challenge for face recognition systems and even for humans. The problem regarding occlusion is less covered by research when compared to other challenges such as pose variation, different expressions, etc. Nevertheless, occluded face recognition is imperative to exploit the full potential of face recognition for real-world applications. In this paper, we restrict the scope to occluded face recognition. First, we explore what the occlusion problem is and what inherent difficulties can arise. As a part of this review, we introduce face detection under occlusion, a preliminary step in face recognition. Second, we present how existing face recognition methods cope with the occlusion problem and classify them into three categories, which are 1) occlusion robust feature extraction approaches, 2) occlusion aware face recognition approaches, and 3) occlusion recovery based face recognition approaches. Furthermore, we analyze the motivations, innovations, pros and cons, and the performance of representative approaches for comparison. Finally, future challenges and method trends of occluded face recognition are thoroughly discussed

Human face recognition under degraded conditions

Comparative studies on the state of the art feature extraction and classification techniques for human face recognition under low resolution problem, are proposed in this work. Also, the effect of applying resolution enhancement, using interpolation techniques, is evaluated. A gradient-based illumination insensitive preprocessing technique is proposed using the ratio between the gradient magnitude and the current intensity level of image which is insensitive against severe level of lighting effect. Also, a combination of multi-scale Weber analysis and enhanced DD-DT-CWT is demonstrated to have a noticeable stability versus illumination variation. Moreover, utilization of the illumination insensitive image descriptors on the preprocessed image leads to further robustness against lighting effect. The proposed block-based face analysis decreases the effect of occlusion by devoting different weights to the image subblocks, according to their discrimination power, in the score or decision level fusion. In addition, a hierarchical structure of global and block-based techniques is proposed to improve the recognition accuracy when different image degraded conditions occur. Complementary performance of global and local techniques leads to considerable improvement in the face recognition accuracy. Effectiveness of the proposed algorithms are evaluated on Extended Yale B, AR, CMU Multi-PIE, LFW, FERET and FRGC databases with large number of images under different degradation conditions. The experimental results show an improved performance under poor illumination, facial expression and, occluded images

FACE CLASSIFICATION FOR AUTHENTICATION APPROACH BY USING WAVELET TRANSFORM AND STATISTICAL FEATURES SELECTION

This thesis consists of three parts: face localization, features selection and classification process. Three methods were proposed to locate the face region in the input image. Two of them based on pattern (template) Matching Approach, and the other based on clustering approach. Five datasets of faces namely: YALE database, MIT-CBCL database, Indian database, BioID database and Caltech database were used to evaluate the proposed methods. For the first method, the template image is prepared previously by using a set of faces. Later, the input image is enhanced by applying n-means kernel to decrease the image noise. Then Normalized Correlation (NC) is used to measure the correlation coefficients between the template image and the input image regions. For the second method, instead of using n-means kernel, an optimized metrics are used to measure the difference between the template image and the input image regions. In the last method, the Modified K-Means Algorithm was used to remove the non-face regions in the input image. The above-mentioned three methods showed accuracy of localization between 98% and 100% comparing with the existed methods. In the second part of the thesis, Discrete Wavelet Transform (DWT) utilized to transform the input image into number of wavelet coefficients. Then, the coefficients of weak statistical energy less than certain threshold were removed, and resulted in decreasing the primary wavelet coefficients number up to 98% out of the total coefficients. Later, only 40% statistical features were extracted from the hight energy features by using the variance modified metric. During the experimental (ORL) Dataset was used to test the proposed statistical method. Finally, Cluster-K-Nearest Neighbor (C-K-NN) was proposed to classify the input face based on the training faces images. The results showed a significant improvement of 99.39% in the ORL dataset and 100% in the Face94 dataset classification accuracy. Moreover, a new metrics were introduced to quantify the exactness of classification and some errors of the classification can be corrected. All the above experiments were implemented in MATLAB environment

A real-time data mining technique applied for critical ECG rhythm on handheld device

Sudden cardiac arrest is often caused by ventricular arrhythmias and these episodes can lead to death for patients with chronic heart disease. Hence, detection of such arrhythmia is crucial in mobile ECG monitoring. In this research, a systematic study is carried out to investigate the possible limitations that are preventing the realisation of a real-time ECG arrhythmia data-mining algorithm suitable for application on mobile devices. Based on the findings, a computationally lightweight algorithm is devised and tested. Ventricular tachycardia (VT) is the most common type of ventricular arrhythmias and is also the deadliest.. A ventricular tachycardia (VT) episode is due to a disorder ofthe regular contractions ofthe heart. It occurs when the human heart ventricles generate a rapid heartbeat which disrupts the regular physiology cycle. The normal sinus rhythm (NSR) of a regular human heart beat signal has its signature PQRST waveform and in regular pattern. Whereas, the characteristics of a ventricular tachycardia (VT) signal waveforms are short R-R intervals, widen QRS duration and the absence of P-waves. Each type of ECG arrhythmia previously mentioned has a unique waveform signature that can be exploited as features to be used for the realization of an automated ECG analysis application. In order to extract this known ECG waveform feature, a time-domain analysis is proposed for feature extraction. Cross-correlation allows the computation of a co-efficient that quantifies the similarity between two times-series. Hence, by cross-correlating known ECG waveform templates with an unknown ECG signal, the coefficient can indicate the similarities. In previous published work, a preliminary study was carried out. The cross-correlation coefficient wave (CCW) technique was introduced for feature extraction. The outcome ofthis work presents CCW as a promising feature to differentiate between NSR, VT and Vfib signals. Moreover, cross-correlation computation does not require high computational overhead. Next, an automated detection algorithm requires a classification mechanism to make sense of the feature extracted. A further study is conducted and published, a fuzzy set k-NN classifier was introduced for the classification of CCW feature extracted from ECG signal segments. A training set of size 180 is used. The outcome of the study indicates that the computationally light-weight fuzzy k-NN classifier can reliably classify between NSR and VT signals, the class detection rate is low for classifying Vfib signal using the fuzzy k-NN classifier. Hence, a modified algorithm known as fuzzy hybrid classifier is proposed. By implementing an expert knowledge based fuzzy inference system for classification of ECG signal; the Vfib signal detection rate was improved. The comparison outcome was that the hybrid fuzzy classifier is able to achieve 91.1% correct rate, 100% sensitivity and 100% specificity. The previously mentioned result outperforms the compared classifiers. The proposed detection and classification algorithm is able to achieve high accuracy in analysing ECG signal feature of NSR, VT and Vfib nature. Moreover, the proposed classifier is successfully implemented on a smart mobile device and it is able to perform data-mining of the ECG signal with satisfiable results

FACE CLASSIFICATION FOR AUTHENTICATION APPROACH BY USING WAVELET TRANSFORM AND STATISTICAL FEATURES SELECTION

This thesis consists of three parts: face localization, features selection and classification process. Three methods were proposed to locate the face region in the input image. Two of them based on pattern (template) Matching Approach, and the other based on clustering approach. Five datasets of faces namely: YALE database, MIT-CBCL database, Indian database, BioID database and Caltech database were used to evaluate the proposed methods. For the first method, the template image is prepared previously by using a set of faces. Later, the input image is enhanced by applying n-means kernel to decrease the image noise. Then Normalized Correlation (NC) is used to measure the correlation coefficients between the template image and the input image regions. For the second method, instead of using n-means kernel, an optimized metrics are used to measure the difference between the template image and the input image regions. In the last method, the Modified K-Means Algorithm was used to remove the non-face regions in the input image. The above-mentioned three methods showed accuracy of localization between 98% and 100% comparing with the existed methods. In the second part of the thesis, Discrete Wavelet Transform (DWT) utilized to transform the input image into number of wavelet coefficients. Then, the coefficients of weak statistical energy less than certain threshold were removed, and resulted in decreasing the primary wavelet coefficients number up to 98% out of the total coefficients. Later, only 40% statistical features were extracted from the hight energy features by using the variance modified metric. During the experimental (ORL) Dataset was used to test the proposed statistical method. Finally, Cluster-K-Nearest Neighbor (C-K-NN) was proposed to classify the input face based on the training faces images. The results showed a significant improvement of 99.39% in the ORL dataset and 100% in the Face94 dataset classification accuracy. Moreover, a new metrics were introduced to quantify the exactness of classification and some errors of the classification can be corrected. All the above experiments were implemented in MATLAB environment