Cognitive MAC protocols for mobile Ad-Hoc networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The term of Cognitive Radio (CR) used to indicate that spectrum radio could be accessed dynamically and opportunistically by unlicensed users. In CR Networks, Interference between nodes, hidden terminal problem, and spectrum sensing errors are big issues to be widely discussed in the research field nowadays. To improve the performance of such kind of networks, this thesis proposes Cognitive Medium Access Control (MAC) protocols for Mobile Ad-Hoc Networks (MANETs). From the concept of CR, this thesis has been able to develop a cognitive MAC framework in which a cognitive process consisting of cognitive elements is considered, which can make efficient decisions to optimise the CR network. In this context, three different scenarios to maximize the secondary user's throughput have been proposed. We found that the throughput improvement depends on the transition probabilities. However, considering the past information state of the spectrum can dramatically increases the secondary user's throughput by up to 40%. Moreover, by increasing the number of channels, the throughput of the network can be improved about 25%. Furthermore, to study the impact of Physical (PHY) Layer errors on cognitive MAC layer in MANETs, in this thesis, a Sensing Error-Aware MAC protocols for MANETs has been proposed. The developed model has been able to improve the MAC layer performance under the challenge of sensing errors. In this context, the proposed model examined two sensing error probabilities: the false alarm probability and the missed detection probability. The simulation results have shown that both probabilities could be adapted to maintain the false alarm probability at certain values to achieve good results. Finally, in this thesis, a cooperative sensing scheme with interference mitigation for Cognitive Wireless Mesh Networks (CogMesh) has been proposed. Moreover, a prioritybased traffic scenario to analyze the problem of packet delay and a novel technique for dynamic channel allocation in CogMesh is presented. Considering each channel in the system as a sub-server, the average delay of the users' packets is reduced and the cooperative sensing scenario dramatically increases the network throughput 50% more as the number of arrival rate is increased

Cross-layer design of multi-hop wireless networks

MULTI -hop wireless networks are usually defined as a collection of nodes equipped with radio transmitters, which not only have the capability to communicate each other in a multi-hop fashion, but also to route each others’ data packets. The distributed nature of such networks makes them suitable for a variety of applications where there are no assumed reliable central entities, or controllers, and may significantly improve the scalability issues of conventional single-hop wireless networks. This Ph.D. dissertation mainly investigates two aspects of the research issues related to the efficient multi-hop wireless networks design, namely: (a) network protocols and (b) network management, both in cross-layer design paradigms to ensure the notion of service quality, such as quality of service (QoS) in wireless mesh networks (WMNs) for backhaul applications and quality of information (QoI) in wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of this Ph.D. dissertation, different network settings are used as illustrative examples, however the proposed algorithms, methodologies, protocols, and models are not restricted in the considered networks, but rather have wide applicability. First, this dissertation proposes a cross-layer design framework integrating a distributed proportional-fair scheduler and a QoS routing algorithm, while using WMNs as an illustrative example. The proposed approach has significant performance gain compared with other network protocols. Second, this dissertation proposes a generic admission control methodology for any packet network, wired and wireless, by modeling the network as a black box, and using a generic mathematical 0. Abstract 3 function and Taylor expansion to capture the admission impact. Third, this dissertation further enhances the previous designs by proposing a negotiation process, to bridge the applications’ service quality demands and the resource management, while using WSNs as an illustrative example. This approach allows the negotiation among different service classes and WSN resource allocations to reach the optimal operational status. Finally, the guarantees of the service quality are extended to the environment of multiple, disconnected, mobile subnetworks, where the question of how to maintain communications using dynamically controlled, unmanned data ferries is investigated

Cross layer optimization in 4G Wireless mesh networks

Wireless networks have been rapidly evolving over the past two decades. It is foreseen that Fourth generation (4G) wireless systems will involve the integration of wireless mesh networks and the 3G wireless systems such as WCDMA. Moreover their wireless mesh routers will provide service to wireless local networks (WLANs) and possibly incorporate MIMO system and smart admission control policies among others. This integration will not only help the service providers cost effectiveness and users connectivities but will also improve and guarantee the QoS criteria. On the other hand, cross layer design has emerged as a new and major thrust in improving the quality of service (QoS) of wireless networks. Cross layer design involves the interaction of various layers of the network hierarchy which could further improve the QoS of the 4G integrated networks. In this work we seek new techniques for improving the overall QoS of integrated 4G systems. Towards this objective we start with the local low tier WLAN access. We then investigate CDMA alternatives to the TDMA access for wireless mesh networks. Cross layer design in wireless mesh networks is then pursued. In the first phase of this thesis a new access mechanism for WLANs is developed, in which users use an optimum transmission probability obtained by estimating the number of stations from the traffic conditions in a sliding window fashion, thereby increasing the throughput compared to the standard DCF and RTS/CTS mechanism while maintaining the same fairness and the delay performance. In the second phase we introduce a code division multiple access/Time division duplex technique CDMA/TDD for wireless mesh networks, we outline the transmitter and receiver for the relay nodes and evaluate the efficiency, delay and delay jitter performances. This CDMA based technique is more amenable to integrating the two systems (Mesh networks and WCDMA or CDMA 2000 of3G). We compare these results with the TDMA operation and through analysis we prove that the CDMA system outperforms the TDMA counterparts. In the third phase we proceed to an instance of cross layer optimized networks, where we develop an overall optimization routine that finds simultaneously the best route and the best capacity allocation to various nodes. This optimization routine minimizes the average end to end packet delay over all calls subject to various contraints. In the process we use a new adaptive version of Spatial TDMA as a platform for comparison purposes of the MAC techniques involved in the cross layer design. In this phase we also combine CDMA/TDD and optimum routing for cross layer design in wireless mesh networks. We compare the results of the CDMA/TDD system with results obtained from the STDMA system. In our analysis we consider the parallel transmissions of mesh nodes in a mesh topology. These parallel transmissions will increase the capacity resulting in a higher throughput with a lower delay. This will allow the service providers to accommodate more users in their system which will obviously reduce the colt and the end users will enjoy a better service paying a lower amount

Cooperative Medium Access Mechanisms and Service-oriented Routing in Multi-hop Wireless Networks

Doktorgradsavhandling i informasjons- og kommunikasjonsteknologi, Universitetet i Agder, Grimstad, 2011Multi-hop wireless networks have been regarded as a promising path towards future wireless communication landscape. In the past decade, most related work has been performed in the context of mobile ad hoc networks. In very recent years, however, much effort has been shifted to more static networks such as wireless mesh networks and wireless sensor networks. While significant progress has been achieved through these years, both theoretically and experimentally, challenges still exist in various aspects of these networks. For instance, how to use multi-hop networks as a means for providing broadband Internet services with reliability and balanced load remains as a challenging task. As the number of end-users is increasing rapidly and more and more users are enjoying multimedia services, how to provide Quality of Service (QoS) with user satisfaction in such networks remains also as a hot topic. Meanwhile, another direction which has recently attracted lots of efforts in the international research community is the introduction of cooperative communications. Cooperative communications based on relaying nodes are capable of improving network performance in terms of increased spectral and power efficiency, extended network coverage, balanced QoS, infrastructure-less deployment, etc. Cooperation may happen at different communication layers, at the physical layer where the received signal is retransmitted and at the MAC and routing layers where a packet is forwarded to the next hop in a coordinated manner towards the destination, respectively. However, without joint consideration and design of physical layer, MAC layer and network layer, the benefit of cooperative communication cannot be exploited to the maximum extent. In addition, how to extend one-hop cooperative communication into multi-hop wireless network scenarios remains as an almost un-chartered research frontier. In this dissertation, we enhance the state of the art technologies in the field of multi-hop wireless networks from a layered perspective. While efficient scheduling mechanisms are proposed at the MAC layer, elaborate routing protocols are devised at the network layer. More specifically, by taking into account of cross layer design we cope with network congestion problems in wireless mesh networks mainly at the network layer. In order to further improve the performance of cooperative wireless networks, we propose a contention-based cooperative MAC protocol in the presence of multiple relay nodes. Since a large majority of existing cooperative MAC protocols are designed based on widely-used IEEE 802.11 MAC protocol which exhibits inherent design constraint when applied in multi-hop wireless networks, it is imperative to develop a novel cooperative MAC protocol which is appropriate for multi-hop network scenarios. Next, we propose a TDMA-based MAC protocol supporting cooperative communications in static multi-hop wireless networks. Furthermore, a cooperative lifetime maximization MAC protocol is proposed to cope with the energy hole problem in wireless sensor networks

Resource allocation in WiMAX mesh networks

ix, 77 leaves : ill. ; 29 cmThe IEEE 802.16 standard popularly known as WiMAX is at the forefront of the technological drive. Achieving high system throughput in these networks is challenging due to interference which limits concurrent transmissions. In this thesis, we study routing and link scheduling inWiMAX mesh networks. We present simple joint routing and link scheduling algorithms that have outperformed most of the existing proposals in our experiments. Our session based routing and links scheduling produced results approximately 90% of a trivial lower bound. We also study the problem of quality of service (QoS) provisioning in WiMAX mesh networks. QoS has become an attractive area of study driven by the increasing demand for multimedia content delivered wirelessly. To accommodate the different applications, the IEEE 802.16 standard defines four classes of service. In this dissertation, we propose a comprehensive scheme consisting of routing, link scheduling, call admission control (CAC) and channel assignment that considers all classes of service. Much of the work in the literature considers each of these problems in isolation. Our routing schemes use a metric that combines interference and traffic load to compute routes for requests while our link scheduling ensures that the QoS requirements of admitted requests are strictly met. Results from our simulation indicate that our routing and link scheduling schemes significantly improve network performance when the network is congested

Cross-layer Design for Wireless Mesh Networks with Advanced Physical and Network Layer Techniques

Cross-layer optimization is an essential tool for designing wireless network protocols. We present a cross-layer optimization framework for wireless networks where at each node, various smart antenna techniques such as beam-forming, spatial division multiple access and spatial division multiplexing are employed. These techniques provide interference suppression, capability for simultaneous communication with several nodes and transmission with higher data rates, respectively. By integrating different combinations of these multi-antenna techniques in physical layer with various constraints from MAC and network layers, three Mixed Integer Linear Programming models are presented to minimize the scheduling period. Since these optimization problems are combinatorially complex, the optimal solution is approached by a Column Generation (CG) decomposition method. Our numerical results show that the resulted directive, multiple access and multiplexing gains combined with scheduling, effectively increase both the spatial reuse and the capacity of the links and therefore enhance the achievable system throughput. The introduced cross-layer approach is also extended to consider heterogeneous networks where we present a multi-criteria optimization framework to model the design problem with an objective of jointly minimizing the cost of deployment and the scheduling period. Our results reveal the significant benefits of this joint design method. We also investigate the achievable performance gain that network coding (with opportunistic listening) when combined with Successive Interference Cancellation (SIC) brings to a multi-hop wireless network. We develop a cross-layer formulation in which SIC enables concurrent receptions from multiple transmitters and network coding reduces the transmission time-slot for minimizing the scheduling time. To solve this combinatorially complex non-linear problem, we decompose it to two linear sub-problems; namely opportunistic network coding aware routing, and scheduling sub-problems. Our results affirm our expectation for a remarkable performance improvement when both techniques are jointly used. Further, we develop an optimization model for combining SIC with power control (PC). Our model optimally adjusts the transmission power of nodes to avoid interference on unintended receivers and properly embraces undesired interference through SIC. Therefore, it provides a balance between usage of PC and SIC at the transmitting and receiving sides, respectively. Our results show considerable throughput improvement in dense and heavily loaded networks

Efficient design of WIMAX/802.16 mesh networks

Broadband wireless networks are becoming increasingly popular due to their fast and inexpensive deployment and their capabilities of providing flexible and ubiquitous Internet access. While the majority of existing broadband wireless networks are still exclusively limited to single hop access, it is the ability of these networks to forward data frames over multi-hop wireless routes which enabled them to easily extend the network coverage area. Unfortunately, achieving good multi- hop throughput has been challenging due to several factors, such as lossy wireless links caused by interference from concurrent transmissions, and intra-path interference caused by transmissions on successive hops along a single path. A wireless mesh network WMN consists of a number of stationary wireless mesh routers, forming a wireless backbone. The wireless mesh routers serve as access points (APs) for wireless mobile devices, and some of them also act as gateways to the Internet via high speed wireless links. Several technologies are currently being considered for mesh (multi-hop) networks, including, IEEE 802.11 (both single channel and multi-channel), IEEE 802.16/WiMAX, and next generation cellular networks (LTE). In this work, we focus on the IEEE 802.16. To maximize the network performance of mesh networks (e.g., throughput), it is essential to consider a cross-layer design, exploiting the dependency between protocol layers such as the routing network layer and the scheduling resource allocation MAC layer. Therefore this PhD thesis considers a cross-layer design approach for designing efficient wireless mesh networks; we first develop mathematical models (link-based and path-based) for the problem of joint routing tree construction and link scheduling in WiMAX-based mesh networks with the objective of minimizing the schedule length to satisfy a set of uplink and downlink demands. This is achieved by maximizing the number of concurrent active transmissions in the network by efficiently reusing the spectrum spatially. Second, we exploit the broadcasts nature of the wireless medium and enhance our design models by incorporating opportunistic network coding into the joint routing tree construction and link scheduling problem. Identifying coding-aware routing structures and utilizing the broadcasting feature of the wireless medium play an important role in realizing the achievable gain of network coding. Last, the uprising mobile WiMAX (802.16e amendment) has introduced more difficulties and challenges into the network design problem; thus, ensuring larger connection lifetime and better routing stability become of greater interest for the joint routing and scheduling problem. This is addressed by augmenting the previously designed models. Throughout this thesis, we assume centralized scheduling at the base station (BS) and we develop, for the joint problems, integer linear programming (ILP) models which require the enumeration of all feasible solutions to reach the optimal solution. Given their complexities, we rely on optimization decomposition methods using column generation for solving each model in an efficient way