4 research outputs found
Recommended from our members
Millimeter wave picocellular networks: capacity analysis and system design
The explosive growth in demand for wireless mobile data, driven by the proliferationof ever more sophisticated handhelds creating and consuming rich multimedia, calls fororders of magnitude increase in the capacity of cellular data networks. Millimeter wavecommunication from picocellular base stations to mobile devices is a particularly promisingapproach for meeting this challenge because of two reasons. First, there is a largeamount of available spectrum, enabling channel bandwidths of the order of Gigahertz(GHz) which are 1-2 orders of magnitude higher than those in existing WiFi and cellularsystems at lower carrier frequencies. Second, the small carrier wavelength enables therealization of highly directive steerable arrays with a large number of antenna elements,in compact form factors, thus significantly enhancing spatial reuse. Hence, we propose toemploy the 60 GHz unlicensed band for basestation to mobile communication in outdoorpicocells.We first investigate the basic feasibility of such networks, showing that 60GHz linksare indeed viable for outdoor applications. For this purpose, we provided link budgetcalculations along with preliminary simulations which show that despite the commonconcerns about higher oxygen absorption and sensitivity to movement and blockage,picocloud architecture provides availability rate of more than 99%.Next, we explore the idea of increasing spatial reuse by shrinking picocells hopingthat interference is no longer the bottleneck given the highly directive antenna arrays atthis band. Our goal is to estimate the achievable capacity for small picocells along an urban canyon. We consider basestations with multiple faces or sectors, each with one or more antenna arrays. Each such array, termed subarray can employ Radio Frequency(RF) beamforming to communicate with one mobile user at a time. We first focus oncharacterization and modeling the inter-cell interference for one subarray on each face.Our analysis provides a strong indication of very large capacity (in the order of Tbps/km)with a few GHz of bandwidth.Following this, we explore the impact of adding multiple subarrays per face. This leadsto intra-cell interference as well as additional inter-cell interference. While the effect ofadditional inter-cell interference can be quantified within our previous framework, intracellinterference has inherently different features that call for new approaches for analysisand design. We propose a cross-layer approach to suppress the intra-cell interference intwo stages: (a) Physical layer (PHY-layer) method which mitigates interference by jointprecoding and power adaptation and (b) Medium Access Control layer (MAC-layer)method which manages the residual interference by optimizing resource allocation. Wethen estimate the capacity gain over conventional LTE cellular networks and establishthat 1000-fold capacity increase is indeed feasible via mm-wave picocellular networks.Lastly, we examine fundamental signal processing challenges associated with channelestimation and tracking for large arrays, placed within the context of system designfor a mm-wave picocellular network. Maintainance of highly directive links in the faceof blockage and mobility requires accurate estimation of the spatial channels betweenbasestation and mobile users. Here we develop the analytical framework for compressivechannel estimation and tracking. We also address the system level design discussinglink budget, overhead, and inter-cell beacon interference. Simulation results demonstratethat our compressive scheme is able to resolve mm-wave spatial channels with a relativelysmall number of compressive measurements
Recommended from our members
Array Architectures and Physical Layer Design for Millimeter-Wave Communications Beyond 5G
Ever increasing demands in mobile data rates have resulted in exploration of millimeter-wave (mmW) frequencies for the next generation (5G) wireless networks. Communications at mmW frequencies is presented with two keys challenges. Firstly, high propagation loss requires base stations (BSs) and user equipment (UEs) to use a large number of antennas and narrow beams to close the link with sufficient received signal power. Consequently, communications using narrow beams create a new challenge in channel estimation and link establishment based on fine angular probing. Current mmW system use analog phased arrays that can probe only one angle at the time which results in high latency during link establishment and channel tracking. It is desirable to design low latency beam training by exploring both physical layer designs and array architectures that could replace current 5G approaches and pave the way to the communications for frequency bands in higher mmW band and sub-THz region where larger antenna arrays and communications bandwidth can be exploited. To this end, we propose a novel signal processing techniques exploiting unique properties of mmW channel, and show both theoretically, in simulation and experiments its advantages over conventional approaches. Secondly, we explore different array architecture design and analyze their trade-offs between spectral efficiency and power consumption and area. For comprehensive comparison, we have developed a methodology for optimal design of system parameters for different array architecture candidates based on the spectral efficiency target, and use these parameters to estimate the array area and power consumption based on the circuits reported in the literature. We show that the hybrid analog and digital architectures have severe scalability concerns in radio frequency signal distribution with increased array size and spatial multiplexing levels, while the fully-digital array architectures have the best performance and power/area trade-offs.The developed approaches are based on a cross-disciplinary research that combines innovation in model based signal processing, machine learning, and radio hardware. This work is the first to apply compressive sensing (CS), a signal processing tool that exploits sparsity of mmW channel model, to accelerate beam training of mmW cellular system. The algorithm is designed to address practical issues including the requirement of cell discovery and synchronization that involves estimation of angular channel together with carrier frequency offset and timing offsets. We have analyzed the algorithm performance in the 5G compliant simulation and showed that an order of magnitude saving is achieved in initial access latency for the desired channel estimation accuracy. Moreover, we are the first to develop and implement a neural network assisted compressive beam alignment to deal with hardware impairments in mmW radios. We have used 60GHz mmW testbed to perform experiments and show that neural networks approach enhances alignment rate compared to CS. To further accelerate beam training, we proposed a novel frequency selective probing beams using the true-time-delay (TTD) analog array architecture. Our approach utilizes different subcarriers to scan different directions, and achieves a single-shot beam alignment, the fastest approach reported to date. Our comprehensive analysis of different array architectures and exploration of emerging architectures enabled us to develop an order of magnitude faster and energy efficient approaches for initial access and channel estimation in mmW systems