3,538 research outputs found
PowerPlanningDL: Reliability-Aware Framework for On-Chip Power Grid Design using Deep Learning
With the increase in the complexity of chip designs, VLSI physical design has
become a time-consuming task, which is an iterative design process. Power
planning is that part of the floorplanning in VLSI physical design where power
grid networks are designed in order to provide adequate power to all the
underlying functional blocks. Power planning also requires multiple iterative
steps to create the power grid network while satisfying the allowed worst-case
IR drop and Electromigration (EM) margin. For the first time, this paper
introduces Deep learning (DL)-based framework to approximately predict the
initial design of the power grid network, considering different reliability
constraints. The proposed framework reduces many iterative design steps and
speeds up the total design cycle. Neural Network-based multi-target regression
technique is used to create the DL model. Feature extraction is done, and the
training dataset is generated from the floorplans of some of the power grid
designs extracted from the IBM processor. The DL model is trained using the
generated dataset. The proposed DL-based framework is validated using a new set
of power grid specifications (obtained by perturbing the designs used in the
training phase). The results show that the predicted power grid design is
closer to the original design with minimal prediction error (~2%). The proposed
DL-based approach also improves the design cycle time with a speedup of ~6X for
standard power grid benchmarks.Comment: Published in proceedings of IEEE/ACM Design, Automation and Test in
Europe Conference (DATE) 2020, 6 page
Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review
The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER
Energy challenges for ICT
The energy consumption from the expanding use of information and communications technology (ICT) is unsustainable with present drivers, and it will impact heavily on the future climate change. However, ICT devices have the potential to contribute signi - cantly to the reduction of CO2 emission and enhance resource e ciency in other sectors, e.g., transportation (through intelligent transportation and advanced driver assistance systems and self-driving vehicles), heating (through smart building control), and manu- facturing (through digital automation based on smart autonomous sensors). To address the energy sustainability of ICT and capture the full potential of ICT in resource e - ciency, a multidisciplinary ICT-energy community needs to be brought together cover- ing devices, microarchitectures, ultra large-scale integration (ULSI), high-performance computing (HPC), energy harvesting, energy storage, system design, embedded sys- tems, e cient electronics, static analysis, and computation. In this chapter, we introduce challenges and opportunities in this emerging eld and a common framework to strive towards energy-sustainable ICT
Power supply noise analysis for 3D ICs using through-silicon-vias
3D design is being recognized widely as the next BIG thing in system integration. However, design and analysis tools for 3D are still in infancy stage. Power supply noise analysis is one of the critical aspects of a design. Hence, the area of noise analysis for 3D designs is a key area for future development. The following research presents a new parasitic RLC modeling technique for 3D chips containing TSVs as well as a novel optimization algorithm for power-ground network of a 3D chip with the aim of minimizing noise in the network. The following work also looks into an existing commercial IR drop analysis tool and presents a way to modify it with the aim of handling 3D designs containing TSVs.M.S.Committee Chair: Lim, Sung-Kyu; Committee Member: Lee, Hsien-Hsin Sean; Committee Member: Loh, Gabrie
Tensor Computation: A New Framework for High-Dimensional Problems in EDA
Many critical EDA problems suffer from the curse of dimensionality, i.e. the
very fast-scaling computational burden produced by large number of parameters
and/or unknown variables. This phenomenon may be caused by multiple spatial or
temporal factors (e.g. 3-D field solvers discretizations and multi-rate circuit
simulation), nonlinearity of devices and circuits, large number of design or
optimization parameters (e.g. full-chip routing/placement and circuit sizing),
or extensive process variations (e.g. variability/reliability analysis and
design for manufacturability). The computational challenges generated by such
high dimensional problems are generally hard to handle efficiently with
traditional EDA core algorithms that are based on matrix and vector
computation. This paper presents "tensor computation" as an alternative general
framework for the development of efficient EDA algorithms and tools. A tensor
is a high-dimensional generalization of a matrix and a vector, and is a natural
choice for both storing and solving efficiently high-dimensional EDA problems.
This paper gives a basic tutorial on tensors, demonstrates some recent examples
of EDA applications (e.g., nonlinear circuit modeling and high-dimensional
uncertainty quantification), and suggests further open EDA problems where the
use of tensor computation could be of advantage.Comment: 14 figures. Accepted by IEEE Trans. CAD of Integrated Circuits and
System
Thermal-Aware Networked Many-Core Systems
Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors.
This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.Siirretty Doriast
Limits on Fundamental Limits to Computation
An indispensable part of our lives, computing has also become essential to
industries and governments. Steady improvements in computer hardware have been
supported by periodic doubling of transistor densities in integrated circuits
over the last fifty years. Such Moore scaling now requires increasingly heroic
efforts, stimulating research in alternative hardware and stirring controversy.
To help evaluate emerging technologies and enrich our understanding of
integrated-circuit scaling, we review fundamental limits to computation: in
manufacturing, energy, physical space, design and verification effort, and
algorithms. To outline what is achievable in principle and in practice, we
recall how some limits were circumvented, compare loose and tight limits. We
also point out that engineering difficulties encountered by emerging
technologies may indicate yet-unknown limits.Comment: 15 pages, 4 figures, 1 tabl
- …