On the Realization of Non-Linear Pseudo-Noise Generator for various Signal Processing and Communication Applications

In digital communication systems and digital signal processing, the design of pseudo-noise (PN) sequences having good correlation properties has been one of the most important development steps. Its well-known application areas include spread spectrum communications, Multiuser Communications, Digital Signal Processing for reduction of power spectral density, mitigation of Multiple Access Interference (MAI) and improvement of signal to noise ratio (SNR) respectively. In this paper a performance of non- linear PN code generator for interference rejection improvement of signal to noise ratio in signal processing applications have been studied.  The signal of interest can be considered to be a digitally controlled wide band digital chaotic signal, which has been implemented by conventional PN code generators.  The proposed technique can be used as an alternative code for improvement in signal to noise ratio, interference rejection, spreading code for various signal processing and communication applications.  The proposed scheme has been implemented using matlab as a simulation tool.  Power spectral density, auto-correlation and cross-correlation property have been thoroughly studied and has been compared with conventional scheme and are presented in the paper. Keywords: PN Code Generator, Spread Spectrum Modulation, Auto-correlation, Cross-correlation, Power Spectral Density

Architecture of a network-in-the-Loop environment for characterizing AC power system behavior

This paper describes the method by which a large hardware-in-the-loop environment has been realized for three-phase ac power systems. The environment allows an entire laboratory power-network topology (generators, loads, controls, protection devices, and switches) to be placed in the loop of a large power-network simulation. The system is realized by using a realtime power-network simulator, which interacts with the hardware via the indirect control of a large synchronous generator and by measuring currents flowing from its terminals. These measured currents are injected into the simulation via current sources to close the loop. This paper describes the system architecture and, most importantly, the calibration methodologies which have been developed to overcome measurement and loop latencies. In particular, a new "phase advance" calibration removes the requirement to add unwanted components into the simulated network to compensate for loop delay. The results of early commissioning experiments are demonstrated. The present system performance limits under transient conditions (approximately 0.25 Hz/s and 30 V/s to contain peak phase-and voltage-tracking errors within 5. and 1%) are defined mainly by the controllability of the synchronous generator

Analysis of Internally Bandlimited Multistage Cubic-Term Generators for RF Receivers

Adaptive feedforward error cancellation applied to correct distortion arising from third-order nonlinearities in RF receivers requires low-noise low-power reference cubic nonidealities. Multistage cubic-term generators utilizing cascaded nonlinear operations are ideal in this regard, but the frequency response of the interstage circuitry can introduce errors into the cubing operation. In this paper, an overview of the use of cubic-term generators in receivers relative to other applications is presented. An interstage frequency response plan is presented for a receiver cubic-term generator and is shown to function for arbitrary three-signal third-order intermodulation generation. The noise of such circuits is also considered and is shown to depend on the total incoming signal power across a particular frequency band. Finally, the effects of the interstage group delay are quantified in the context of a relevant communication standard requirement

European White Book on Real-Time Power Hardware in the Loop Testing : DERlab Report No. R- 005.0

The European White Book on Real-Time-Powerhardware-in-the-Loop testing is intended to serve as a reference document on the future of testing of electrical power equipment, with specifi c focus on the emerging hardware-in-the-loop activities and application thereof within testing facilities and procedures. It will provide an outlook of how this powerful tool can be utilised to support the development, testing and validation of specifi cally DER equipment. It aims to report on international experience gained thus far and provides case studies on developments and specifi c technical issues, such as the hardware/software interface. This white book compliments the already existing series of DERlab European white books, covering topics such as grid-inverters and grid-connected storag

Performance Analysis of Discrete Wavelet Multitone Transceiver for Narrowband PLC in Smart Grid

Smart Grid is an abstract idea, which involves the utilization of powerlines for sensing, measurement, control and communication for efficient utilization and distribution of energy, as well as automation of meter reading, load management and capillary control of Green Energy resources connected to the grid. Powerline Communication (PLC) has assumed a new role in the Smart Grid scenario, adopting the narrowband PLC (NB-PLC) for a low cost and low data rate communication for applications such as, automatic meter reading, dynamic management of load, etc. In this paper, we have proposed and simulated a discrete wavelet multitone (DWMT) transceiver in the presence of impulse noise for the NB-PLC channel applications in Smart Grid. The simulation results show that a DWMT transceiver outperforms a DFT-DMT with reference to the bit error rate (BER) performance

Secure communication based on indirect coupled synchronization

In this paper, a secure communication system composed of four chaotic oscillators is proposed. Two of these oscillators are unidirectionally coupled and employed as transmitter and receiver. The other two oscillators are indirectly coupled and are employed as keystream generators. The novelty lies in the generation of the same chaotic keystream both in the transmitter and receiver side for encryption and decryption purposes. We show, in particular, that it is possible to synchronize the two keystream generators even though they are not directly coupled. So doing, an estimation of the keystream is obtained allowing decrypting the message. The main feature of the proposed communication scheme is that the keystream cannot be generated with the sole knowledge of the transmitted chaotic signal, hence making it very secure. The performance of the proposed communication scheme is shown via simulation using the Chua and Lorenz oscillators

Time Delay Estimation from Low Rate Samples: A Union of Subspaces Approach

Time delay estimation arises in many applications in which a multipath medium has to be identified from pulses transmitted through the channel. Various approaches have been proposed in the literature to identify time delays introduced by multipath environments. However, these methods either operate on the analog received signal, or require high sampling rates in order to achieve reasonable time resolution. In this paper, our goal is to develop a unified approach to time delay estimation from low rate samples of the output of a multipath channel. Our methods result in perfect recovery of the multipath delays from samples of the channel output at the lowest possible rate, even in the presence of overlapping transmitted pulses. This rate depends only on the number of multipath components and the transmission rate, but not on the bandwidth of the probing signal. In addition, our development allows for a variety of different sampling methods. By properly manipulating the low-rate samples, we show that the time delays can be recovered using the well-known ESPRIT algorithm. Combining results from sampling theory with those obtained in the context of direction of arrival estimation methods, we develop necessary and sufficient conditions on the transmitted pulse and the sampling functions in order to ensure perfect recovery of the channel parameters at the minimal possible rate. Our results can be viewed in a broader context, as a sampling theorem for analog signals defined over an infinite union of subspaces