1,550 research outputs found
Energy-Efficient NOMA Enabled Heterogeneous Cloud Radio Access Networks
Heterogeneous cloud radio access networks (H-CRANs) are envisioned to be
promising in the fifth generation (5G) wireless networks. H-CRANs enable users
to enjoy diverse services with high energy efficiency, high spectral
efficiency, and low-cost operation, which are achieved by using cloud computing
and virtualization techniques. However, H-CRANs face many technical challenges
due to massive user connectivity, increasingly severe spectrum scarcity and
energy-constrained devices. These challenges may significantly decrease the
quality of service of users if not properly tackled. Non-orthogonal multiple
access (NOMA) schemes exploit non-orthogonal resources to provide services for
multiple users and are receiving increasing attention for their potential of
improving spectral and energy efficiency in 5G networks. In this article a
framework for energy-efficient NOMA H-CRANs is presented. The enabling
technologies for NOMA H-CRANs are surveyed. Challenges to implement these
technologies and open issues are discussed. This article also presents the
performance evaluation on energy efficiency of H-CRANs with NOMA.Comment: This work has been accepted by IEEE Network. Pages 18, Figure
Energy Efficiency in Two-Tiered Wireless Sensor Networks
We study a two-tiered wireless sensor network (WSN) consisting of access
points (APs) and base stations (BSs). The sensing data, which is
distributed on the sensing field according to a density function , is first
transmitted to the APs and then forwarded to the BSs. Our goal is to find an
optimal deployment of APs and BSs to minimize the average weighted total, or
Lagrangian, of sensor and AP powers. For , we show that the optimal
deployment of APs is simply a linear transformation of the optimal -level
quantizer for density , and the sole BS should be located at the geometric
centroid of the sensing field. Also, for a one-dimensional network and uniform
, we determine the optimal deployment of APs and BSs for any and .
Moreover, to numerically optimize node deployment for general scenarios, we
propose one- and two-tiered Lloyd algorithms and analyze their convergence
properties. Simulation results show that, when compared to random deployment,
our algorithms can save up to 79\% of the power on average.Comment: 11 pages, 7 figure
Energy Harvesting Wireless Communications: A Review of Recent Advances
This article summarizes recent contributions in the broad area of energy
harvesting wireless communications. In particular, we provide the current state
of the art for wireless networks composed of energy harvesting nodes, starting
from the information-theoretic performance limits to transmission scheduling
policies and resource allocation, medium access and networking issues. The
emerging related area of energy transfer for self-sustaining energy harvesting
wireless networks is considered in detail covering both energy cooperation
aspects and simultaneous energy and information transfer. Various potential
models with energy harvesting nodes at different network scales are reviewed as
well as models for energy consumption at the nodes.Comment: To appear in the IEEE Journal of Selected Areas in Communications
(Special Issue: Wireless Communications Powered by Energy Harvesting and
Wireless Energy Transfer
EC-CENTRIC: An Energy- and Context-Centric Perspective on IoT Systems and Protocol Design
The radio transceiver of an IoT device is often where most of the energy is consumed. For this reason, most research so far has focused on low power circuit and energy efficient physical layer designs, with the goal of reducing the average energy per information bit required for communication. While these efforts are valuable per se, their actual effectiveness can be partially neutralized by ill-designed network, processing and resource management solutions, which can become a primary factor of performance degradation, in terms of throughput, responsiveness and energy efficiency. The objective of this paper is to describe an energy-centric and context-aware optimization framework that accounts for the energy impact of the fundamental functionalities of an IoT system and that proceeds along three main technical thrusts: 1) balancing signal-dependent processing techniques (compression and feature extraction) and communication tasks; 2) jointly designing channel access and routing protocols to maximize the network lifetime; 3) providing self-adaptability to different operating conditions through the adoption of suitable learning architectures and of flexible/reconfigurable algorithms and protocols. After discussing this framework, we present some preliminary results that validate the effectiveness of our proposed line of action, and show how the use of adaptive signal processing and channel access techniques allows an IoT network to dynamically tune lifetime for signal distortion, according to the requirements dictated by the application
Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey
This paper provides a comprehensive review of the domain of physical layer
security in multiuser wireless networks. The essential premise of
physical-layer security is to enable the exchange of confidential messages over
a wireless medium in the presence of unauthorized eavesdroppers without relying
on higher-layer encryption. This can be achieved primarily in two ways: without
the need for a secret key by intelligently designing transmit coding
strategies, or by exploiting the wireless communication medium to develop
secret keys over public channels. The survey begins with an overview of the
foundations dating back to the pioneering work of Shannon and Wyner on
information-theoretic security. We then describe the evolution of secure
transmission strategies from point-to-point channels to multiple-antenna
systems, followed by generalizations to multiuser broadcast, multiple-access,
interference, and relay networks. Secret-key generation and establishment
protocols based on physical layer mechanisms are subsequently covered.
Approaches for secrecy based on channel coding design are then examined, along
with a description of inter-disciplinary approaches based on game theory and
stochastic geometry. The associated problem of physical-layer message
authentication is also introduced briefly. The survey concludes with
observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with
arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials,
201
DESIGN OF EFFICIENT IN-NETWORK DATA PROCESSING AND DISSEMINATION FOR VANETS
By providing vehicle-to-vehicle and vehicle-to-infrastructure wireless communications, vehicular ad hoc networks (VANETs), also known as the “networks on wheels”, can greatly enhance traffic safety, traffic efficiency and driving experience for intelligent transportation system (ITS). However, the unique features of VANETs, such as high mobility and uneven distribution of vehicular nodes, impose critical challenges of high efficiency and reliability for the implementation of VANETs. This dissertation is motivated by the great application potentials of VANETs in the design of efficient in-network data processing and dissemination. Considering the significance of message aggregation, data dissemination and data collection, this dissertation research targets at enhancing the traffic safety and traffic efficiency, as well as developing novel commercial applications, based on VANETs, following four aspects: 1) accurate and efficient message aggregation to detect on-road safety relevant events, 2) reliable data dissemination to reliably notify remote vehicles, 3) efficient and reliable spatial data collection from vehicular sensors, and 4) novel promising applications to exploit the commercial potentials of VANETs.
Specifically, to enable cooperative detection of safety relevant events on the roads, the structure-less message aggregation (SLMA) scheme is proposed to improve communication efficiency and message accuracy. The scheme of relative position based message dissemination (RPB-MD) is proposed to reliably and efficiently disseminate messages to all intended vehicles in the zone-of-relevance in varying traffic density. Due to numerous vehicular sensor data available based on VANETs, the scheme of compressive sampling based data collection (CS-DC) is proposed to efficiently collect the spatial relevance data in a large scale, especially in the dense traffic. In addition, with novel and efficient solutions proposed for the application specific issues of data dissemination and data collection, several appealing value-added applications for VANETs are developed to exploit the commercial potentials of VANETs, namely general purpose automatic survey (GPAS), VANET-based ambient ad dissemination (VAAD) and VANET based vehicle performance monitoring and analysis (VehicleView).
Thus, by improving the efficiency and reliability in in-network data processing and dissemination, including message aggregation, data dissemination and data collection, together with the development of novel promising applications, this dissertation will help push VANETs further to the stage of massive deployment
GFDM FOR NEXT GENERATION WIRELESS COMMUNICATION SYSTEM
In modern scenarios, there are several applications of OFDM, but it also has some demerits like sensitive to Carrier Frequency Offset (CFO), high Peak to Average Power Ratio (PAPR), and timing offset large. Out Of Band (OOB) and low spectral efficiency due to cyclic prefix per symbol insertion. To diminish and discard above problems, new multiplexing technique is required for next generation wireless communication i.e. GFDM. GFDM is becoming popular day by day due to flexibility in pulse shape as well as single cyclic prefix in a multipath channel and which makes it eligible for the 5th generation technology. This paper deals with an overview of a GFDM and presents a comparative study between OFDM and GFDM
- …