TOPOLOGICAL PLANNING OF COMMUNICATION NETWORKS

In this paper, we concentrate on topological planning process of large-scale communication networks such as those used by telecom operators. Such networks are usually spread over large geographical area, and finding an optimal topology is very important part of the planning process. Network equipment used in such network is very expensive, and two connection points can be hundreds of kilometers apart. These networks, in most cases, form a backbone network of telecom operator, meaning that majority of traffic is carried through high-speed communication links of such network. Any cable cuts or equipment malfunctions could result in huge data losses. Therefore, such networks require high degree of availability and fault resistance, which must be considered during the planning process. Network topology providing fault resistance should offer at least two separate communication paths between any pair of network nodes. Most important issue in network topology planning is finding topology with lowest possible overall network price, while keeping all requirements (such as fault tolerance, availability, maximal number of hops, maximal blocking probability etc.) satisfied. Network design process can be divided into three stages. First step is making decisions about which network elements (nodes, existing edges) should be included in a backbone network (for instance, one of sub-problems appearing in this phase is facility location problem). Second step includes selection of network topology, so that all elements selected in first step will be interconnected satisfying given requirements. Last phase is used to determine node and link capacities needed for successful traffic transport as well as routings of traffic demands, including protection. Depending on technologies used in network, different routing and protection mechanisms, as well as specific topology models, can be used (e.g. SDH/WDM SHR, mesh, dual-homing etc.)

A tabu search algorithm for dynamic routing in ATM cell-switching networks

This paper deals with the dynamic routing problem in ATM cell-switching networks. We present a mathematical programming model based on cell loss and a Tabu Search algorithm with short-term memory that is reinforced with a long-term memory procedure. The estimation of the quality of the solutions is fast, due to the specific encoding of the feasible solutions. The Tabu Search algorithm reaches good quality solutions, outperforming other approaches such as Genetic Algorithms and the Minimum Switching Path heuristic, regarding both cell loss and the CPU time consumption. The best results were found for the more complex networks with a high number of switches and links

Protection and restoration algorithms for WDM optical networks

Currently, Wavelength Division Multiplexing (WDM) optical networks play a major role in supporting the outbreak in demand for high bandwidth networks driven by the Internet. It can be a catastrophe to millions of users if a single optical fiber is somehow cut off from the network, and there is no protection in the design of the logical topology for a restorative mechanism. Many protection and restoration algorithms are needed to prevent, reroute, and/or reconfigure the network from damages in such a situation. In the past few years, many works dealing with these issues have been reported. Those algorithms can be implemented in many ways with several different objective functions such as a minimization of protection path lengths, a minimization of restoration times, a maximization of restored bandwidths, etc. This thesis investigates, analyzes and compares the algorithms that are mainly aimed to guarantee or maximize the amount of remaining bandwidth still working over a damaged network. The parameters considered in this thesis are the routing computation and implementation mechanism, routing characteristics, recovering computation timing, network capacity assignment, and implementing layer. Performance analysis in terms of the restoration efficiency, the hop length, the percentage of bandwidth guaranteed, the network capacity utilization, and the blocking probability is conducted and evaluated

The Optimal Virtual Path Design of ATM Networks

This paper studies the optimal configuration of virtual paths in ATM networks. A linear model that minimizes the maximum flow density of links is proposed for the optimal virtual path configuration. The advantage of the modeling is that traffic loads are distributed evenly over entire network. An algorithm based on the multi-commodity approach is proposed to solve the problem. Examples are given to show that this algorithm solves the optimal VP assignment problem very quickly and efficiently. Since only single source-destination linear programming subproblems need to be solved in our approach, this algorithm can be applied to large-scale networks.published_or_final_versio

Performance Analysis and Design of Mobile Ad-Hoc Networks

We focus on the performance analysis and design of a wireless ad-hoc network using a virtual-circuit or reservation based medium access layer. In a reservation based MAC network, source nodes reserve a session's link capacity end-to-end over the entire path before sending traffic over the established path. An example of a generic reservation based MAC protocol is Unifying Slot Assignment Protocol (USAP). Any reservation based medium access protocol (including USAP) uses a simple set of rules to determine the cells or timeslots available at a node to reserve link capacity along the path to the next node. Given inputs of node locations, traffic pattern between nodes and link propagation matrices, we develop models to estimate blocking probability and throughput for reservation based wireless ad-hoc networks. These models are based on extending reduced load loss network models for a wireless network. For generic USAP with multiple frequency channels, the key effect of multiuser interference on a link is modeled via reduced available link capacity where the effects of transmissions and receptions in the link neighborhood are modeled using USAP reservation rules. We compare our results with simulation and obtain good results using our extended reduced load loss network models but with reduced available link capacity distribution obtained by simulation. For the case of generic USAP using a single frequency channel, we develop models for unicast traffic using reduced load loss network models but with the sharing of the wireless medium between a node and its neighbors modeled by considering cliques of neighboring interfering links around a particular link. We compare results of this model with simulation and show good match. We also develop models to calculate source-destination throughput for the reservation MAC as used in the Joint Tactical Radio System to support both unicast and multicast traffic. These models are based on extending reduced load loss network models for wireless multicast traffic with the sharing of the wireless medium between a node and its (upto 2 hop) neighbors modeled by considering cliques of interfering nodes around a particular node. We compare results of this model with simulation and show good match with simulation. Once we have developed models to estimate throughput and blocking probabilities, we use these models to optimize total network throughput. In order to optimize total throughput, we compute throughput sensitivities of the reduced load loss network model using an implied cost formulation and use these sensitivities to choose the routing probabilities among multiple paths so that total network throughput is maximized. In any network scenario, MANETs can get disconnected into clusters. As part of the MANET design problem, we look at the problem of establishing network connectivity and satisfying required traffic capacity between disconnected clusters by placing a minimum number of advantaged high flying Aerial Platforms (APs) as relay nodes at appropriate places. We also extend the connectivity solution in order to make the network single AP survivable. The problem of providing both connectivity and required capacity between disconnected ground clusters (which contain nodes that can communicate directly with each other) is formulated as a summation-form clustering problem of the ground clusters with the APs along with inter-AP distance constraints that make the AP network connected and with complexity costs that take care of ground cluster to AP capacity constraints. The resultant clustering problem is solved using Deterministic Annealing to find (near) globally optimal solutions for the minimum number and locations of the APs to establish connectivity and provide required traffic capacity between disconnected clusters. The basic connectivity constraints are extended to include conditions that make the resultant network survivable to a single AP failure. In order to make the network single AP survivable, we extend the basic connectivity solution by adding another summation form constraint so that the AP network forms a biconnected network and also by making sure that each ground cluster is connected to atleast two APs. We establish the validity of our algorithms by comparing them with optimal exhaustive search algorithms and show that our algorithms are near-optimal for the problem of establishing connectivity between disconnected clusters

Survivable mesh-network design & optimization to support multiple QoP service classes

Every second, vast amounts of data are transferred over communication systems around the world, and as a result, the demands on optical infrastructures are extending beyond the traditional, ring-based architecture. The range of content and services available from the Internet is increasing, and network operations are constantly under pressure to expand their optical networks in order to keep pace with the ever increasing demand for higher speed and more reliable links