Mutual coupling exploitation for point-to-point MIMO by constructive interference

In this paper, we propose a joint analog-digital (A/D) beamforming scheme for the point-to-point (P2P) multiple-input-multiple-output (MIMO) systems, where we exploit the mutual coupling effect to further improve the system performance. By judiciously selecting the value of each load impedance for the antenna array, it will be shown that the mutual coupling effect can be beneficial. We firstly prove that the full elimination of mutual coupling is not achievable solely by changing the values of each load impedance. We further propose a joint A/D technique where the resulting interference aligns constructively to the useful signal vector with the concept of constructive interference. Numerical results show that the proposed schemes can achieve an improved performance compared to systems with fixed mutual coupling, especially when the antenna spacing is small

Exploiting Constructive Mutual Coupling in P2P MIMO by Analog-Digital Phase Alignment

In this paper, we propose a joint analog-digital (A/D) beamforming scheme for the point-to-point multiple-input-multiple-output system, where we exploit mutual coupling by optimizing the load impedances of the transmit antennas. Contrary to the common conception that mutual coupling strictly harms the system performance, we show that mutual coupling can be beneficial by exploiting the concept of constructive interference. By changing the value of each load impedance for the antenna array based on convex optimization, the mutual coupling effect can be manipulated so that the resulting interference aligns constructively to the useful signal vector. We first prove that the full elimination of mutual coupling effect is not achievable solely by tuning the values of the antenna load impedances. We then introduce the proposed A/D scheme for both PSK and QAM modulations, where performance gains with respect to conventional techniques are obtained. The implementation of the proposed schemes is also discussed, where a lookup table can be built to efficiently apply the calculated load impedances. The numerical results show that the proposed schemes can achieve an improved performance compared to systems with fixed mutual coupling, especially when the antenna spacing is small

1-Bit Massive MIMO Downlink Based on Constructive Interference

In this paper, we focus on the multiuser massive multiple-input single-output (MISO) downlink with low-cost 1-bit digital-to-analog converters (DACs) for PSK modulation, and propose a low-complexity refinement process that is applicable to any existing 1-bit precoding approaches based on the constructive interference (CI) formulation. With the decomposition of the signals along the detection thresholds, we first formulate a simple symbol-scaling method as the performance metric. The low-complexity refinement approach is subsequently introduced, where we aim to improve the introduced symbol-scaling performance metric by modifying the transmit signal on one antenna at a time. Numerical results validate the effectiveness of the proposed refinement method on existing approaches for massive MIMO with 1-bit DACs, and the performance improvements are most significant for the low-complexity quantized zero-forcing (ZF) method.Comment: 5 pages, EUSIPCO 201

Interference Exploitation-based Hybrid Precoding with Robustness Against Phase Errors

Hybrid analog-digital precoding significantly reduces the hardware costs in massive MIMO transceivers when compared to fully-digital precoding at the expense of increased transmit power. In order to mitigate the above shortfall, we use the concept of constructive interference-based precoding, which has been shown to offer significant transmit power savings when compared with the conventional interference suppression-based precoding in fully-digital multiuser MIMO systems. Moreover, in order to circumvent the potential quality-of-service degradation at the users due to the hardware impairments in the transmitters, we judiciously incorporate robustness against such vulnerabilities in the precoder design. Since the undertaken constructive interference-based robust hybrid precoding problem is nonconvex with infinite constraints and thus difficult to solve optimally, we decompose the problem into two subtasks, namely, analog precoding and digital precoding. In this paper, we propose an algorithm to compute the optimal constructive interference-based robust digital precoders. Furthermore, we devise a scheme to facilitate the implementation of the proposed algorithm in a low-complexity and distributed manner. We also discuss block-level analog precoding techniques. Simulation results demonstrate the superiority of the proposed algorithm and its implementation scheme over the state-of-the-art methods

Interference Exploitation via Symbol-Level Precoding: Overview, State-of-the-Art and Future Directions

Interference is traditionally viewed as a performance limiting factor in wireless communication systems, which is to be minimized or mitigated. Nevertheless, a recent line of work has shown that by manipulating the interfering signals such that they add up constructively at the receiver side, known interference can be made beneficial and further improve the system performance in a variety of wireless scenarios, achieved by symbol-level precoding (SLP). This paper aims to provide a tutorial on interference exploitation techniques from the perspective of precoding design in a multi-antenna wireless communication system, by beginning with the classification of constructive interference (CI) and destructive interference (DI). The definition for CI is presented and the corresponding mathematical characterization is formulated for popular modulation types, based on which optimization-based precoding techniques are discussed. In addition, the extension of CI precoding to other application scenarios as well as for hardware efficiency is also described. Proof-of-concept testbeds are demonstrated for the potential practical implementation of CI precoding, and finally a list of open problems and practical challenges are presented to inspire and motivate further research directions in this area

Analog-Digital Beamforming in the MU-MISO Downlink by use of Tunable Antenna Loads

We investigate the performance of multi-user multiple-input-single-output (MU-MISO) downlink in the presence of the mutual coupling effect at the transmitter. Contrary to traditional approaches that aim at eliminating this effect, in this paper we propose a joint analog-digital (AD) beamforming scheme that exploits this effect to further improve the system performance. A jointly optimal AD beamformer is firstly obtained by iteratively maximizing the minimum received signal-to-interference-plus-noise ratio (SINR) in the digital domain, followed by an optimization on the load impedance of each antenna element in the analog domain. We further introduce a decoupled low-complexity approach, with which existing closed-form beamforming schemes can also be efficiently applied. For the consideration of hardware imperfections in practice, we study the case where the analog load values are quantized, and propose a sequential search scheme based on greedy algorithm to efficiently obtain the desired quantized load values. Moreover, we also investigate the imperfect channel state information (CSI) scenarios, where we prove the optimality for closed-form beamformers, and further propose the robust schemes for two typical CSI error models. Simulation results show that with the proposed schemes the mutual coupling effect can be exploited to further improve the performance for both perfect CSI and imperfect CSI

Multiple-Antenna Systems: From Generic to Hardware-Informed Precoding Designs

5G-and-beyond communication systems are expected to be in a heterogeneous form of multiple-antenna cellular base stations (BSs) overlaid with small cells. The fully-digital BS structures can incur significant power consumption and hardware complexity. Moreover, the wireless BSs for small cells usually have strict size constraints, which incur additional hardware effects such as mutual coupling (MC). Consequently, the transmission techniques designed for future wireless communication systems should respect the hardware structures at the BSs. For this reason, in this thesis we extend generic downlink precoding to more advanced hardware-informed transmission techniques for a variety of BS structures. This thesis firstly extends the vector perturbation (VP) precoding to multiple-modulation scenarios, where existing VP-based techniques are sub-optimal. Subsequently, this thesis focuses on the downlink transmission designs for hardware effects in the form of MC, limited number of radio frequency (RF) chains, and low-precision digital-to-analog converters (DACs). For these scenarios, existing precoding techniques are either sub-optimal or not directly applicable due to the specific hardware constraints. In this context, this thesis first proposes analog-digital (AD) precoding methods for MC exploitation in compact single-user multiple-antenna systems with the concept of constructive interference, and further extends the idea of MC exploitation to multi-user scenarios with a joint optimisation on the precoding matrix and the mutual coupling effect. We further consider precoding for wireless BSs with a limited number of RF chains, in the form of compact parasitic antenna array as well as hybrid analog-digital structures designed for large-scale multiple-antenna systems. In addition, with a reformulation of the constructive interference, this thesis also considers the low-complexity precoding design for the use of low-resolution DACs for a massive-antenna array at the BSs. Analytical and numerical results reveal an improved performance of the proposed techniques compared to the state-of-the-art approaches, which validates the effectiveness of the introduced methods

Constructive Interference Based Constant Envelope Precoding

We present a new multiple-input-multiple-output (MIMO) transmission scheme for generic phase-shift-keying (PSK) modulations in the multi-user (MU) downlink channel, where Constant Envelope Precoding (CEP) is combined with concepts of interference exploitation. In the proposed approach, multi-user-interference (MUI) is treated as a resource for increasing the signal-to-interference-and-noise-ratio (SINR) at the receiver side, in contrast with conventional precoding schemes from the literature which aim to minimize MUI. Two different CEP schemes are presented: a first technique, based on the application of the cross-entropy solver, and a two-step approach, based on an initial relaxation of the power constraints and a subsequent enforcement of per-antenna power constraints. The benefits of the proposed algorithms are evaluated in terms of computational costs and achievable symbol error rate (SER) in a perfect channel state information (CSI) scenario for different modulation orders. The analytical and numerical results show that interference-exploitation concepts are able to further extend the benefits of classical CEP