An overview of signal processing issues in chemical sensing

International audienceThis tutorial paper aims at summarizing some problems, ranging from analytical chemistry to novel chemical sensors, that can be addressed with classical or advanced methods of signal and image processing. We gather them under the denomination of "chemical sensing". It is meant to introduce the special session "Signal Processing for Chemical Sensing" with a large overview of issues which have been and remain to be addressed in this application domain, including chemical analysis leading to PARAFAC/tensor methods, hyper spectral imaging, ion-sensitive sensors, artificial nose, chromatography, mass spectrometry, etc. For enlarging and illustrating the points of view of this tutorial, the invited papers of the session consider other applications (NMR, Raman spectroscopy, recognition of explosive compounds, etc.) addressed by various methods, e.g. source separation, Bayesian, and exploiting typical chemical signal priors like positivity, linearity, unit-concentration or sparsity

Advancements in microfabricated gas sensors and microanalytical tools for the sensitive and selective detection of odors

In recent years, advancements in micromachining techniques and nanomaterials have enabled the fabrication of highly sensitive devices for the detection of odorous species. Recent efforts done in the miniaturization of gas sensors have contributed to obtain increasingly compact and portable devices. Besides, the implementation of new nanomaterials in the active layer of these devices is helping to optimize their performance and increase their sensitivity close to humans’ olfactory system. Nonetheless, a common concern of general-purpose gas sensors is their lack of selectivity towards multiple analytes. In recent years, advancements in microfabrication techniques and microfluidics have contributed to create new microanalytical tools, which represent a very good alternative to conventional analytical devices and sensor-array systems for the selective detection of odors. Hence, this paper presents a general overview of the recent advancements in microfabricated gas sensors and microanalytical devices for the sensitive and selective detection of volatile organic compounds (VOCs). The working principle of these devices, design requirements, implementation techniques, and the key parameters to optimize their performance are evaluated in this paper. The authors of this work intend to show the potential of combining both solutions in the creation of highly compact, low-cost, and easy-to-deploy platforms for odor monitoringPostprint (published version

Trends in Detector R&D

Detectors are they eyes with which we observe the physics and explore new phenomena. The development of more performing detectors is essential for future physics discoveries and requires appropriate attention, funding, and recognition. In this paper the current trends in High Energy Physics detector research and development are reviewed. Since the topic is broader than the available space, figures are not included in the paper, but can be found in the references, whose main sources are the recent instrumentation conferences [1 – 6]

NASA Tech Briefs Index, 1978

Approximately 601 announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration are presented. Emphasis is placed on information considered likely to be transferrable across industrial, regional, or disciplinary lines. Subject matter covered includes: electronic components and circuits; electron systems; physical sciences; materials; life sciences; mechanics; machinery; fabrication technology; and mathematics and information sciences

Index to 1981 NASA Tech Briefs, volume 6, numbers 1-4

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1981 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

Development of nanomaterial based sensors for the detection of explosives

Detection of low levels of illicit materials, such as explosives, is a key challenge for security and environmental monitoring. Recent advances in highly sensitive molecular-recognition techniques utilising nanomaterials may pro- vide a wealth of useful tools for this purpose. In this thesis two classes of nanomaterials are applied to explosives sensing. The first is a range of novel gold nanoparticles, produced via the facile reduction of chloroauric acid with mono- and di-ketones. The mechanism of this reaction and the resultant particles are characterised with spectroscopy and tunnelling electron microscopy. Several different sizes of gold colloid were created, but most interesting was the creation of gold nanostars, which have potential as a substrate for surface-enhanced Raman spectroscopy. The second nanomaterial-based sensor is a quantum dot array featuring supramolecular receptors for small-molecule explosive detection. By combining array elements into a single, multichannel platform; faster results can be obtained from smaller amounts of sample. The ability of quantum dots to act as luminescent probes in a multichannel array, due to their sharp, variable emissions from a single excitation wavelength, was exploited to detect five explosives - 2,4-dinitrotoluene (DNT), 2,4,6-trinitrotoluene (TNT), tetryl (2,4,6-trinitrophenylmethylnitramine), cyclotrimethylenetrinitramine (RDX) and pentaerythritol tetranitrate (PETN). To create the array, each different colour quantum dot was functionalised with a different cavitand, aromatic or nucleophilic-heteroatom based receptor via a facile photoligation process. These receptors undergo supramolecular interactions with the explosives, inducing variable fluorescence quenching of the quantum dots. Pattern analysis of the fluorescence quenching data allowed for explosive detection and identification with limits-of-detection of < 1 part-per-million. Finally, the development of the quantum dot based sensors from solution phase to solid phase is examined, with the aim of creating point-of- test devices for use in the field. A key outcome was the development of supramolecular organogel/nanoparticle hybrid “smart” materials for sensing applications

Spaceborne sensors (1983-2000 AD): A forecast of technology

A technical review and forecast of space technology as it applies to spaceborne sensors for future NASA missions is presented. A format for categorization of sensor systems covering the entire electromagnetic spectrum, including particles and fields is developed. Major generic sensor systems are related to their subsystems, components, and to basic research and development. General supporting technologies such as cryogenics, optical design, and data processing electronics are addressed where appropriate. The dependence of many classes of instruments on common components, basic R&D and support technologies is also illustrated. A forecast of important system designs and instrument and component performance parameters is provided for the 1983-2000 AD time frame. Some insight into the scientific and applications capabilities and goals of the sensor systems is also given

Three Dimensional Nanowire Array Piezo-phototronic and Piezo-photo-magnetotronic Sensors

Piezotronic and piezo-phototronic is a burgeoning field of study which emerges from the coupling of intrinsic materials properties exhibited by non-centrosymmetric semiconductors. In the past decade research efforts were mainly focused on the wurtzite family of 1D nanostructures, with major emphasis on ZnO nanowire nanogenerators, MS piezotronic transistors, LEDs and photodetectors mainly integrated on single nanowires. In view of previously known advantages of charge carrier separation in radial heterojunctions, particularly in type-II core/shell nanowires, it can be anticipated that the performance of photosensing devices can be largely enhanced by piezo-phototronic effect. Moreover, the performance metrics can be further improved in an array of nanowires where geometrical feature enabled multiple reflection can efficiently trap incident illumination. The crux of this dissertation lies in the development of 3D type-II core/shell nanowire array based piezo-phototronic device and also to investigate the effect of magnetic field on ZnO nanowire arrays based piezotronic and piezo-phototronic device for new class of sensors. In this regard, prototype piezo-phototronic broadband photodetectors integrated on two material systems, namely type-II CdSe/ZnTe 3D core/shell nanowire arrays and fully wide band gap type-II ZnO/ZnS 3D core/shell nanowire arrays have been developed where the photodetection performance of each device exhibits high sensitivity, fast response and large responsivity. The application of piezo-phototronic effect further improves the device performance by three to four orders of magnitude change numerically calculated from absolute responsivities at multiple wavelengths. A 3D ZnO nanowire array based new class of piezo-photo-magnetotronic sensor is also developed for detection of pressure, illumination and magnetic field suggesting multiple functionality of a single device where more than one effect can be coupled together to exhibit piezo-magnetotronic or piezo-photo-magnetotronic type of device behavior