1,407 research outputs found
Interference-Aware Scheduling for Connectivity in MIMO Ad Hoc Multicast Networks
We consider a multicast scenario involving an ad hoc network of co-channel
MIMO nodes in which a source node attempts to share a streaming message with
all nodes in the network via some pre-defined multi-hop routing tree. The
message is assumed to be broken down into packets, and the transmission is
conducted over multiple frames. Each frame is divided into time slots, and each
link in the routing tree is assigned one time slot in which to transmit its
current packet. We present an algorithm for determining the number of time
slots and the scheduling of the links in these time slots in order to optimize
the connectivity of the network, which we define to be the probability that all
links can achieve the required throughput. In addition to time multiplexing,
the MIMO nodes also employ beamforming to manage interference when links are
simultaneously active, and the beamformers are designed with the maximum
connectivity metric in mind. The effects of outdated channel state information
(CSI) are taken into account in both the scheduling and the beamforming
designs. We also derive bounds on the network connectivity and sum transmit
power in order to illustrate the impact of interference on network performance.
Our simulation results demonstrate that the choice of the number of time slots
is critical in optimizing network performance, and illustrate the significant
advantage provided by multiple antennas in improving network connectivity.Comment: 34 pages, 12 figures, accepted by IEEE Transactions on Vehicular
Technology, Dec. 201
High-Performance Broadcast and Multicast Protocols for Multi-Radio Multi-Channel Wireless Mesh Networks
Recently, wireless mesh networks (WMNs) have attracted much attention. A vast amount of unicast, multicast and broadcast protocols has been developed for WMNs or mobile ad hoc networks (MANETs). First of all, broadcast and multicast in wireless networks are fundamentally different from the way in which wired networks function due to the well-known wireless broadcast/multicast advantage. Moreover, most broadcast and multicast protocols in wireless networks assume a single-radio single-channel and single-rate network model, or a generalized physical model, which does not take into account the impact of interference. This dissertation focuses on high-performance broadcast and multicast protocols designed for multi-radio multi-channel (MRMC) WMNs. MRMC increases the capacity of the network from different aspects. Multi-radio allows mesh nodes to simultaneously send and receive through different radios to its neighbors. Multi-channel allows channels to be reused across the network, which expands the available spectrum and reduces the interference. Unlike MANETs, WMNs are assumed to be static or with minimal mobility. Therefore, the main design goal in WMNs is to achieve high throughput rather than to maintain connectivity. The capacity of WMNs is constrained by the interference caused by the neighbor nodes. One direct design objective is to minimize or reduce the interference in broadcast and multicast. This dissertation presents a set of broadcast and multicast protocols and mathematical formulations to achieve the design goal in MRMC WMNs. First, the broadcast problem is addressed with full consideration of both inter-node and intra-node interference to achieve efficient broadcast. The interference-aware broadcast protocol simultaneously achieves full reliability, minimum broadcast or multicast latency, minimum redundant transmissions, and high throughput. With an MRMC WMN model, new link and channel quality metrics are defined and are suitable for the design of broadcast and multicast protocols. Second, the minimum cost broadcast problem (MCBP), or minimum number of transmissions problem, is studied for MRMC WMNs. Minimum cost broadcast potentially allows more effective and efficient schedule algorithms to be designed. The proposed protocol with joint consideration of channel assignment reduces the interference to improve the throughput in the MCBP. Minimum cost broadcast in MRMC WMNs is very different from that in the single radio single channel scenario. The channel assignment in MRMC WMNs is used to assign multiple radios of every node to different channels. It determines the actual network connectivity since adjacent nodes have to be assigned to a common channel. Transmission on different channels makes different groups of neighboring nodes, and leads to different interference. Moreover, the selection of channels by the forward nodes impacts on the number of radios needed for broadcasting. Finally, the interference optimization multicast problem in WMNs with directional antennas is discussed. Directional transmissions can greatly reduce radio interference and increase spatial reuse. The interference with directional transmissions is defined for multicast algorithm design. Multicast routing found by the interference-aware algorithm tends to have fewer channel collisions. The research work presented in this dissertation concludes that (1) new and practical link and channel metrics are required for designing broadcast and multicast in MRMC WMNs; (2) a small number of radios is sufficient to significantly improve throughput of broadcast and multicast in WMNs; (3) the number of channels has more impact on almost all performance metrics, such as the throughput, the number of transmission, and interference, in WMNs
Energy Efficient Multicast Routing in Mobile Ad Hoc Networks: Contemporary Affirmation of Benchmarking Models in Recent Literature
The Mobile Ad hoc Networks playing critical role in network aided communication requirements The features such as ad hoc and open architecture based connectivity and node mobility are elevating the mobile ad hoc networks as much as feasible to deploy and use The direct communication between any of two nodes in this network is possible if target node is in the range of source node If not the indirect communication took place which is usually referred as multi hop routing The multi hop routing occurs as either a unicast model one source node to one destination node multicast model one source node to multiple destination nodes or multiple casting manifold unicast routing In these routing strategies provision of service quality in multi hop routing is a challenging task The optimal quality of service in routing magnifies the delivery ratio transmission rate network life span and other expected characteristics of the ad hoc routing Among the quality service provision factors minimal energy conservation is prime factor which is since the nodes involved in routing are self-energized and if discharged early then the route will be destructed that causes discontinued routing The energy consumption is more specific in multicast routing hence it is grabbing the more attention of the current research contribution
Cross-layer schemes for performance optimization in wireless networks
Wireless networks are undergoing rapid progress and inspiring numerous applications. As the application of wireless networks becomes broader, they are expected to not only provide ubiquitous connectivity, but also support end users with certain service guarantees.
End-to-end delay is an important Quality of Service (QoS) metric in multihop wireless networks. This dissertation addresses how to minimize end-to-end delay through joint optimization of network layer routing and link layer scheduling. Two cross-layer schemes, a loosely coupled cross-layer scheme and a tightly coupled cross-layer scheme, are proposed. The two cross-layer schemes involve interference modeling in multihop wireless networks with omnidirectional antenna. In addition, based on the interference model, multicast schedules are optimized to minimize the total end-to-end delay.
Throughput is another important QoS metric in wireless networks. This dissertation addresses how to leverage the spatial multiplexing function of MIMO links to improve wireless network throughput. Wireless interference modeling of a half-duplex MIMO node is presented. Based on the interference model, routing, spatial multiplexing, and scheduling are jointly considered in one optimization model. The throughput optimization problem is first addressed in constant bit rate networks and then in variable bit rate networks. In a variable data rate network, transmitters can use adaptive coding and modulation schemes to change their data rates so that the data rates are supported by the Signal to Noise and Interference Ratio (SINR). The problem of achieving maximum throughput in a millimeter-wave wireless personal area network is studied --Abstract, page iv
Resilient networking in wireless sensor networks
This report deals with security in wireless sensor networks (WSNs),
especially in network layer. Multiple secure routing protocols have been
proposed in the literature. However, they often use the cryptography to secure
routing functionalities. The cryptography alone is not enough to defend against
multiple attacks due to the node compromise. Therefore, we need more
algorithmic solutions. In this report, we focus on the behavior of routing
protocols to determine which properties make them more resilient to attacks.
Our aim is to find some answers to the following questions. Are there any
existing protocols, not designed initially for security, but which already
contain some inherently resilient properties against attacks under which some
portion of the network nodes is compromised? If yes, which specific behaviors
are making these protocols more resilient? We propose in this report an
overview of security strategies for WSNs in general, including existing attacks
and defensive measures. In this report we focus at the network layer in
particular, and an analysis of the behavior of four particular routing
protocols is provided to determine their inherent resiliency to insider
attacks. The protocols considered are: Dynamic Source Routing (DSR),
Gradient-Based Routing (GBR), Greedy Forwarding (GF) and Random Walk Routing
(RWR)
- …