10,324 research outputs found

    Joint PAPR and OBP Reduction for NC-OFDM Systems

    No full text
    The spectrum resource is always a critical issue for wireless communications since it directly impacts the data rate and capacity. However, the problem of spectrum resource scarcity always exists. Moreover, spectrum resource scarcity becomes more severe as new communication technologies and wireless applications sprout. Noncontiguous orthogonal frequency division multiplexing (NC-OFDM) is a multicarrier method for bandwidth utilization. Unfortunately, this system has two fatal defects: high peak-to-average power ratio (PAPR) and considerable out-of-band power (OBP), which are detrimental to the system's performance. To solve these two problems, we propose a convex optimization-based method for joint PAPR and OBP reduction in NC-OFDM Systems. The strategy is to permit the secondary user to utilize the unoccupied spectrum of the primary user with dynamic spectrum sharing (DSS) based on a cognitive radio network (CRN). To this end, a flexible system operating over noncontiguous bands and DSS scenarios is necessary. The simulation results have shown that our method could effectively improve the overall performance and outperform other schemes, i.e., projections onto convex sets (POCS) and alternating projections onto convex and non-convex sets (APOCNCS), without harming the transmission of the primary system. The collaboration between secondary and primary systems is viable with the proposed method

    Performance evaluation and control of an MMC active rectifier with half-bridge and full-bridge submodules for HVDC applications

    Get PDF
    Dissertation (MEng (Electrical Engineering))--University of Pretoria, 2021.The modular multilevel active rectifier was designed and evaluated, whereby the half bridge and the full bridge DC-DC converters as its submodules for the high voltage direct current transmission were compared. It was found that, by taking advantage of the unipolar modulation scheme in the full bridge converter, the switching losses in the two converters are equal when they are both operated in the linear modulation region. Furthermore, operating the full bridge converter in the overmodulation region does not give it a pronounced advantage over the half bridge converter. The conduction losses in the full bridge converter are two times higher than those in the half bridge converter, due to double the number of semiconductor devices. However, using the half bridge converter in the high voltage direct current modular multilevel converter requires an expensive DC-side breaker, while use of the full bridge converter eliminates the need for such a breaker due to the intrinsic DC-side fault current blocking capability. The clear choice between the two requires industry cost data. A design methodology for the submodule capacitor average voltage loop controllers for phase-shifted carrier modulated modular multilevel converters was carried out from first principles. The methodology enables design of such controllers to be carried out in a step by step and straightforward manner without resorting to simulation or guesswork. A simple but effective submodule capacitor sizing method was proposed. The resulting submodule capacitor size was shown to be smaller than those resulting from other sizing methods proposed in the literature while achieving the submodule capacitor voltage ripple specifications. A robust DC bus voltage controller design for modular multilevel rectifiers was presented, whereby a design method for multilevel voltage source converters with DC link capacitors was adopted for modular multilevel rectifiers. Since the modular multilevel converters for HVDC application are designed without the DC-link capacitor to mitigate the effects of a possible DC-side fault current, the submodule capacitors in the modular multilevel converter acted as an equivalent DC link capacitor to accomplish the design.Electrical, Electronic and Computer EngineeringMEng (Electrical Engineering)Unrestricte

    Authentication enhancement in command and control networks: (a study in Vehicular Ad-Hoc Networks)

    Get PDF
    Intelligent transportation systems contribute to improved traffic safety by facilitating real time communication between vehicles. By using wireless channels for communication, vehicular networks are susceptible to a wide range of attacks, such as impersonation, modification, and replay. In this context, securing data exchange between intercommunicating terminals, e.g., vehicle-to-everything (V2X) communication, constitutes a technological challenge that needs to be addressed. Hence, message authentication is crucial to safeguard vehicular ad-hoc networks (VANETs) from malicious attacks. The current state-of-the-art for authentication in VANETs relies on conventional cryptographic primitives, introducing significant computation and communication overheads. In this challenging scenario, physical (PHY)-layer authentication has gained popularity, which involves leveraging the inherent characteristics of wireless channels and the hardware imperfections to discriminate between wireless devices. However, PHY-layerbased authentication cannot be an alternative to crypto-based methods as the initial legitimacy detection must be conducted using cryptographic methods to extract the communicating terminal secret features. Nevertheless, it can be a promising complementary solution for the reauthentication problem in VANETs, introducing what is known as “cross-layer authentication.” This thesis focuses on designing efficient cross-layer authentication schemes for VANETs, reducing the communication and computation overheads associated with transmitting and verifying a crypto-based signature for each transmission. The following provides an overview of the proposed methodologies employed in various contributions presented in this thesis. 1. The first cross-layer authentication scheme: A four-step process represents this approach: initial crypto-based authentication, shared key extraction, re-authentication via a PHY challenge-response algorithm, and adaptive adjustments based on channel conditions. Simulation results validate its efficacy, especially in low signal-to-noise ratio (SNR) scenarios while proving its resilience against active and passive attacks. 2. The second cross-layer authentication scheme: Leveraging the spatially and temporally correlated wireless channel features, this scheme extracts high entropy shared keys that can be used to create dynamic PHY-layer signatures for authentication. A 3-Dimensional (3D) scattering Doppler emulator is designed to investigate the scheme’s performance at different speeds of a moving vehicle and SNRs. Theoretical and hardware implementation analyses prove the scheme’s capability to support high detection probability for an acceptable false alarm value ≤ 0.1 at SNR ≥ 0 dB and speed ≤ 45 m/s. 3. The third proposal: Reconfigurable intelligent surfaces (RIS) integration for improved authentication: Focusing on enhancing PHY-layer re-authentication, this proposal explores integrating RIS technology to improve SNR directed at designated vehicles. Theoretical analysis and practical implementation of the proposed scheme are conducted using a 1-bit RIS, consisting of 64 × 64 reflective units. Experimental results show a significant improvement in the Pd, increasing from 0.82 to 0.96 at SNR = − 6 dB for multicarrier communications. 4. The fourth proposal: RIS-enhanced vehicular communication security: Tailored for challenging SNR in non-line-of-sight (NLoS) scenarios, this proposal optimises key extraction and defends against denial-of-service (DoS) attacks through selective signal strengthening. Hardware implementation studies prove its effectiveness, showcasing improved key extraction performance and resilience against potential threats. 5. The fifth cross-layer authentication scheme: Integrating PKI-based initial legitimacy detection and blockchain-based reconciliation techniques, this scheme ensures secure data exchange. Rigorous security analyses and performance evaluations using network simulators and computation metrics showcase its effectiveness, ensuring its resistance against common attacks and time efficiency in message verification. 6. The final proposal: Group key distribution: Employing smart contract-based blockchain technology alongside PKI-based authentication, this proposal distributes group session keys securely. Its lightweight symmetric key cryptography-based method maintains privacy in VANETs, validated via Ethereum’s main network (MainNet) and comprehensive computation and communication evaluations. The analysis shows that the proposed methods yield a noteworthy reduction, approximately ranging from 70% to 99%, in both computation and communication overheads, as compared to the conventional approaches. This reduction pertains to the verification and transmission of 1000 messages in total

    Pilot based channel estimation improvement in orthogonal frequency-division multiplexing systems using linear predictive coding

    Get PDF
    Pilot based least square (LS) channel estimation is a commonly used channel estimation technique in orthogonal frequency-division multiplexing based systems due to its simplicity. However, LS estimation does not handle the noise effect and hence suffers from performance degradation. Since the channel coefficients are correlated in time and hence show a slower variation than the noise, it is possible to encode the channel using linear predictive coding (LPC) without the noise. In this work, the channel is estimated from the pilots using LS estimation and in a second step the channel’s LS estimated is encoded as LPC coefficients to produce an improved channel estimation. The estimation technique is simulated for space-time block coding (STBC) based orthogonal frequency-division multiplexing (OFDM) system and the bit error rate (BER) curves show improvement of the LPC estimation over the LS estimation of the channel

    Adaptive refined random orthogonal matching pursuit algorithm for FBMC/OQAM MIMO framework

    No full text
    The fifth generation of wireless communication is anticipated to provide improved quality of service and enhanced data rates to the end users. One such technology that stands out as a potential transmission scheme for 5G systems is Filter Bank Multicarrier using Offset Quadrature Amplitude Modulation (FBMC/OQAM) with an effective channel estimation technique for improved performance. However, due to the inherent imaginary interference, channel estimation methods relying on preamble structures in FBMC/OQAM systems exhibit sub-optimal performance, particularly within Multiple-Input Multiple-Output (MIMO) setups. For channel estimation schemes based on compressed sensing, the inherent sparsity of wireless channels can be exploited for accurate channel reconstruction and overall performance improvement.We propose a novel compressed sensing based algorithm namely, Adaptive Refined Random Orthogonal Matching Pursuit (ARROMP), for MIMO-FBMC system with Coordinated MultiPoint (CoMP) scheduling. This algorithm adaptively selects a support set by utilizing a double threshold for the minimization of mean squared error and for accurate channel reconstruction. The proposed algorithm's performance is compared with existing Orthogonal Matching Pursuit (OMP) schemes such as random OMP, refined random OMP, and least square-based estimation. The numerical simulations suggest that the proposed adaptive algorithm provides performance improvement in terms of reduced Mean Squared Error (MSE) of channel reconstruction and Bit Error Rate (BER). Moreover, the proposed ARROMP algorithm for MIMO-FBMC is rigorously tested with CoMP scheduling for a cellular network using frequency division duplex mode. The proposed system presents significant improvements in throughput and spectral efficiency for all types of cell users, including cell-edge users. The simulation results validate the improved performance of the proposed algorithm with CoMP scheduling over the existing single-cell system with no coordination

    Nonlinearities Influence to RF Satellite Downlink Model with QAM and Raised Square Cosine Filter

    Get PDF
    Reliability of communications is of vital importance in military applications. Constellations are connecting coded words at different ends of the communication channel that indicate the correctness of the transmitted message. In this paper, we compare the influence of the selected nonlinearity in the transmit amplifier on the constellation diagrams in radio frequency (RF) geostationary satellite downlink and bit-error-rate (BER). Two cases were analyzed: negligible and severe noise in the communication channel. Considering the cubic, hyperbolic tangent, Saleh, Ghorbani, and Raap models, it is shown that the Raap and Saleh models can be used for the lowest BERs when the noise is negligible. In case of severe noise, it is best to use the Raap model from the set of nonlinearities considered. The ANOVA-test showed that there is a dependence between the Raap and Saleh models in the presence of negligible noise, but not in the presence of severe noise

    A low-cost multi-band waveform security framework in resource-constrained communications

    Get PDF
    Traditional physical layer secure beamforming is achieved via precoding before signal transmission using channel state information (CSI). However, imperfect CSI will compromise the performance with imperfect beamforming and potential information leakage. In addition, multiple RF chains and antennas are needed to support the narrow beam generation, which complicates hardware implementation and is not suitable for resourceconstrained Internet-of-Things (IoT) devices. Moreover, with the advancement of hardware and artificial intelligence (AI), lowcost and intelligent eavesdropping to wireless communications is becoming increasingly detrimental. In this paper, we propose a multi-carrier based multi-band waveform-defined security (WDS) framework, independent from CSI and RF chains, to defend against AI eavesdropping. Ideally, the continuous variations of sub-band structures lead to an infinite number of spectral features, which can potentially prevent brute-force eavesdropping. Sub-band spectral pattern information is efficiently constructed at legitimate users via a proposed chaotic sequence generator. A novel security metric, termed signal classification accuracy (SCA), is used to evaluate the security robustness under AI eavesdropping. Communication error probability and complexity are also investigated to show the reliability and practical capability of the proposed framework. Finally, compared to traditional secure beamforming techniques, the proposed multi-band WDS framework reduces power consumption by up to six times

    Towards spin state tailoring of charged excitons in InGaAs quantum dots using oblique magnetic fields

    Get PDF
    We investigate the effect of oblique magnetic field configurations on a singly-charged self-assembled quantum dot system as a means to tune the spin composition of the ground electron spin eigenstates. Using magneto-optical spectroscopy and Stokes polarimetry techniques, we evaluate the anisotropic g-factors and characterize the polarization properties of the charged quantum dot system under oblique fields. We compare the results to a simple model that captures the resulting level structure and polarization selection rules for arbitrary magnetic field orientations. Under oblique magnetic fields, the system’s ground spin eigenstates are composed of unequal superpositions of the electron spins. This provides an additional degree of freedom to tailor the composition of the ground spin states in charged quantum dots and based on this we demonstrate spin pumping and initialization of the tailored ground states, confirming that the double-Λ level structure of the charged quantum dot persists in oblique magnetic fields. These combined results show that the uneven weightings of the tailored spin states can yield systems with interesting behaviors, with potential towards developing spin-selective readout schemes to further enhance the capabilities of spin qubits

    Partial-duplex amplify-and-forward relaying: spectral efficiency analysis under self-interference

    Get PDF
    We propose a novel mode of operation for Amplify-and-Forward relays in which the spectra of the relay input and output signals partially overlap. This partial-duplex relaying mode encompasses half-duplex and full-duplex as particular cases. By viewing the partial-duplex relay as a bandwidth-preserving Linear Periodic Time-Varying system, an analysis of the spectral efficiency in the presence of self-interference is developed. In contrast with previous works, self-interference is regarded as a useful information-bearing component rather than simply assimilated to noise. This approach reveals that previous results regarding the impact of self-interference on (full-duplex) relay performance are overly pessimistic. Based on a frequency-domain interpretation of the effect of self-interference, a number of suboptimal decoding architectures at the destination node are also discussed. It is found that the partial-duplex relaying mode may provide an attractive tradeoff between spectral efficiency and receiver complexity.Agencia Estatal de Investigación | Ref. TEC2016-75103-C2-2-RAgencia Estatal de Investigación | Ref. TEC2016-76409-C2-2

    SIW-Based Frequency-Tunable Self-Oscillating Active Integrated Antenna

    Get PDF
    A frequency-tunable self-oscillating active integrated antenna (AIA) mainly composed of active circuit and 1×2 substrate integrated waveguide (SIW) antenna array is proposed in this paper. Manipulating bias voltage to the varactors loaded on SIW antenna could offer electronic control of oscillation frequency. The DC bias circuit of the varactors integrated in SIW cavity can provide compact structure. Due to the load effect of the high Q SIW cavity, the designed antenna exhibits low phase noise. According to the measured results, the effective isotropic radiated power (EIRP) ranges from 4.4 to 12.9 dBm which is superior to previous reports with the frequency tuning range of about 20 MHz. The phase noise is -92.7 dBc/Hz at 100 kHz offset. The measured results also show that the cross-polarization levels are almost 20 dB lower than the co-polarized one in the main beam direction at 5.698 GHz
    corecore