Biomimetic flow fields for proton exchange membrane fuel cells: A review of design trends

Bipolar Plate design is one of the most active research fields in Polymer Electrolyte Membrane Fuel Cells (PEMFCs) development. Bipolar Plates are key components for ensuring an appropriate water management within the cell, preventing flooding and enhancing the cell operation at high current densities. This work presents a literature review covering bipolar plate designs based on nature or biological structures such as fractals, leaves or lungs. Biological inspiration comes from the fact that fluid distribution systems found in plants and animals such as leaves, blood vessels, or lungs perform their functions (mostly the same functions that are required for bipolar plates) with a remarkable efficiency, after millions of years of natural evolution. Such biomimetic designs have been explored to date with success, but it is generally acknowledged that biomimetic designs have not yet achieved their full potential. Many biomimetic designs have been derived using computer simulation tools, in particular Computational Fluid Dynamics (CFD) so that the use of CFD is included in the review. A detailed review including performance benchmarking, time line evolution, challenges and proposals, as well as manufacturing issues is discussed.Ministerio de Ciencia, Innovación y Universidades ENE2017-91159-EXPMinisterio de Economía y Competitividad UNSE15-CE296

Development of c-means Clustering Based Adaptive Fuzzy Controller for A Flapping Wing Micro Air Vehicle

Advanced and accurate modelling of a Flapping Wing Micro Air Vehicle (FW MAV) and its control is one of the recent research topics related to the field of autonomous Unmanned Aerial Vehicles (UAVs). In this work, a four wing Natureinspired (NI) FW MAV is modeled and controlled inspiring by its advanced features like quick flight, vertical take-off and landing, hovering, and fast turn, and enhanced manoeuvrability when contrasted with comparable-sized fixed and rotary wing UAVs. The Fuzzy C-Means (FCM) clustering algorithm is utilized to demonstrate the NIFW MAV model, which has points of interest over first principle based modelling since it does not depend on the system dynamics, rather based on data and can incorporate various uncertainties like sensor error. The same clustering strategy is used to develop an adaptive fuzzy controller. The controller is then utilized to control the altitude of the NIFW MAV, that can adapt with environmental disturbances by tuning the antecedent and consequent parameters of the fuzzy system.Comment: this paper is currently under review in Journal of Artificial Intelligence and Soft Computing Researc

The bees algorithm: Modelling nature to solve complex optimisation problems

The Bees Algorithm models the foraging behaviour of honey bees in order to solve optimisation problems. The algorithm performs a kind of exploitative neighbourhood search combined with random explorative search. This paper describes the Bees Algorithm and presents two application examples: the training of neural networks to predict the energy efficiency of buildings, and the solution of the protein folding problem. The Bees Algorithm proved its effectiveness and speed, and obtained very competitive modelling accuracies compared with other state-of-the-art methods

Cellular Helmet Liner Design through Bio-inspired Structures and Topology Optimization of Compliant Mechanism Lattices

The continuous development of sport technologies constantly demands advancements in protective headgear to reduce the risk of head injuries. This article introduces new cellular helmet liner designs through two approaches. The first approach is the study of energy-absorbing biological materials. The second approach is the study of lattices comprised of force-diverting compliant mechanisms. On the one hand, bio-inspired liners are generated through the study of biological, hierarchical materials. An emphasis is given on structures in nature that serve similar concussion-reducing functions as a helmet liner. Inspiration is drawn from organic and skeletal structures. On the other hand, compliant mechanism lattice (CML)-based liners use topology optimization to synthesize rubber cellular unit cells with effective positive and negative Poisson's ratios. Three lattices are designed using different cellular unit cell arrangements, namely, all positive, all negative, and alternating effective Poisson's ratios. The proposed cellular (bio-inspired and CML-based) liners are embedded between two polycarbonate shells, thereby, replacing the traditional expanded polypropylene foam liner used in standard sport helmets. The cellular liners are analyzed through a series of 2D extruded ballistic impact simulations to determine the best performing liner topology and its corresponding rubber hardness. The cellular design with the best performance is compared against an expanded polypropylene foam liner in a 3D simulation to appraise its protection capabilities and verify that the 2D extruded design simulations scale to an effective 3D design

A comparison of processing techniques for producing prototype injection moulding inserts.

This project involves the investigation of processing techniques for producing low-cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM. PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer. The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the mesoscale features, small cross-sections and complex geometries were considered the main problems. For both processing methods, fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used. The parts produced from the three processing methods are investigated and their respective merits and issues are discussed

Graphic Thinking and Digital Processes: Three Built Case Studies of Digital Materiality

Think strategic link between computer programming; digital modeling; the data; matter and CNC manufacturing in the various stages of the architectural project is key to update our discipline with new technologies. Our proposal to articulate and digital graphic thought processes; developable folded geometries and compositions is rooted in an expanded graphic thinking through multiple conceptual tools that are already part of the operational structure of our discipline

Reducing risk in pre-production investigations through undergraduate engineering projects.

This poster is the culmination of final year Bachelor of Engineering Technology (B.Eng.Tech) student projects in 2017 and 2018. The B.Eng.Tech is a level seven qualification that aligns with the Sydney accord for a three-year engineering degree and hence is internationally benchmarked. The enabling mechanism of these projects is the industry connectivity that creates real-world projects and highlights the benefits of the investigation of process at the technologist level. The methodologies we use are basic and transparent, with enough depth of technical knowledge to ensure the industry partners gain from the collaboration process. The process we use minimizes the disconnect between the student and the industry supervisor while maintaining the academic freedom of the student and the commercial sensitivities of the supervisor. The general motivation for this approach is the reduction of the entry cost of the industry to enable consideration of new technologies and thereby reducing risk to core business and shareholder profits. The poster presents several images and interpretive dialogue to explain the positive and negative aspects of the student process