Real-time dynamic spectrum management for multi-user multi-carrier communication systems

Dynamic spectrum management is recognized as a key technique to tackle interference in multi-user multi-carrier communication systems and networks. However existing dynamic spectrum management algorithms may not be suitable when the available computation time and compute power are limited, i.e., when a very fast responsiveness is required. In this paper, we present a new paradigm, theory and algorithm for real-time dynamic spectrum management (RT-DSM) under tight real-time constraints. Specifically, a RT-DSM algorithm can be stopped at any point in time while guaranteeing a feasible and improved solution. This is enabled by the introduction of a novel difference-of-variables (DoV) transformation and problem reformulation, for which a primal coordinate ascent approach is proposed with exact line search via a logarithmicly scaled grid search. The concrete proposed algorithm is referred to as iterative power difference balancing (IPDB). Simulations for different realistic wireline and wireless interference limited systems demonstrate its good performance, low complexity and wide applicability under different configurations.Comment: 14 pages, 9 figures. This work has been submitted to the IEEE for possible publicatio

Techno-economic viability of integrating satellite communication in 4G networks to bridge the broadband digital divide

Bridging the broadband digital divide between urban and rural areas in Europe is one of the main targets of the Digital Agenda for Europe. Though many technological options are proposed in literature, satellite communication has been identified as the only possible solution for the most rural areas, due to its global coverage. However, deploying an end-to-end satellite solution might, in some cases, not be cost-effective. The aim of this study is to give insights into the economic effectiveness of integrating satellite communications into 4G networks in order to connect the most rural areas (also referred to as white areas) in Europe. To this end, this paper proposes a converged solution that combines satellite communication as a backhaul network with 4G as a fronthaul network to bring enhanced broadband connectivity to European rural areas, along with a techno-economic model to analyse the economic viability of this integration. The model is based on a Total Cost of Ownership (TCO) model for 5 years, taking into account both capital and operational expenditures, and aims to calculate the TCO as well as the Average Cost Per User (ACPU) for the studied scenarios. We evaluate the suggested model by simulating a hypothetical use case for two scenarios. The first scenario is based on a radio access network connecting to the 4G core network via a satellite link. Results for this scenario show high operational costs. In order to reduce these costs, we propose a second scenario, consisting of caching the popular content on the edge to reduce the traffic carried over the satellite link. This scenario demonstrates a significant operational cost decrease (more than 60%), which also means a significant ACPU decrease. We evaluate the robustness of the results by simulating for a range of population densities, hereby also providing an indication of the economic viability of our proposed solution across a wider range of areas

Impacto das comunicações M2M em redes celulares de telecomunicações

Mestrado em Engenharia Electrónica e de TelecomunicaçõesAs comunicações Máquina-Máquina (M2M) apresentam um crescimento muito significativo e algumas projeções apontam para que esta tendência se acentue drasticamente ao longo dos próximos anos. O tráfego gerado por este tipo de comunicações tem caraterísticas muito diferentes do tráfego de dados, ou voz, que atualmente circula nas redes celulares de telecomunicações. Assim, é fundamental estudar as caraterísticas dos tipos de tráfego associados com comunicações M2M, por forma a compreender os efeitos que tais caraterísticas podem provocar nas redes celulares de telecomunicações. Esta dissertação procura identificar e estudar algumas das caraterísticas do tráfego M2M, com especial enfoque na sinalização gerada por serviços M2M. Como resultado principal deste trabalho surge o desenvolvimento de modelos que permitem a construção de uma ferramenta analítica de orquestração de serviços e análise de rede. Esta ferramenta permite orquestrar serviços e modelar padrões de tráfego numa rede UMTS, possibilitando uma análise simultânea aos efeitos produzidos no segmento core da mesma rede. Ao longo deste trabalho procura-se que a abordagem aos problemas apresentados permita que os resultados obtidos sejam válidos, ou adaptáveis, num âmbito mais abrangente do que apenas as comunicações M2M.Machine to Machine (M2M) communications present significant growth and some projections indicate that this trend is going to increase dramatically over the coming years. The traffic generated by this type of communication has very different characteristics when compared to data or voice traffic currently going through cellular telecommunications networks. Thus, it is essential to study the characteristics of traffic associated with M2M communications in order to understand the effects that its features can imply to cellular telecommunications networks. This dissertation tries to identify and study some of the characteristics of M2M traffic, with particular focus on signaling generated by M2M services. A number of models, that enable the development of an analytic tool for service orchestration and network analysis, are presented. This tool enables service orchestration and traffic modeling on a UMTS network, with simultaneous visualization of the impacts on the core of such network. The work presented in this document seeks to approach the problems at study in ways ensuring that its outcomes are valid for a wider scope than just M2M communications

A Class-AB/D Audio Power Amplifier for Mobile Applications Integrated Into a 2.5G/3G Baseband Processor

A filterless class-AB/D audio power amplifier integrated into a feature-rich 2.5G/3G baseband processor in standard 65-nm CMOS technology is designed for direct battery hookup in mobile phone applications. Circuit techniques are used to overcome the voltage limitations of standard MOS transistors for operation at voltage levels of 2.5-4.8 V. Both amplifiers can drive more than 650 mW into an 8-Omega load with maximum distortion levels of 1% and 5% for class-D and class-AB, respectively, all from a 3.6-V power supply. The achieved power-supply-rejection ratios are 72 and 84 dB, respectively. The mono implementation of both amplifiers together is 0.44 mm(2)

Programmable photonics : an opportunity for an accessible large-volume PIC ecosystem

We look at the opportunities presented by the new concepts of generic programmable photonic integrated circuits (PIC) to deploy photonics on a larger scale. Programmable PICs consist of waveguide meshes of tunable couplers and phase shifters that can be reconfigured in software to define diverse functions and arbitrary connectivity between the input and output ports. Off-the-shelf programmable PICs can dramatically shorten the development time and deployment costs of new photonic products, as they bypass the design-fabrication cycle of a custom PIC. These chips, which actually consist of an entire technology stack of photonics, electronics packaging and software, can potentially be manufactured cheaper and in larger volumes than application-specific PICs. We look into the technology requirements of these generic programmable PICs and discuss the economy of scale. Finally, we make a qualitative analysis of the possible application spaces where generic programmable PICs can play an enabling role, especially to companies who do not have an in-depth background in PIC technology

Highly Linear 2,5-V CMOS ΣΔ Modulator for ADSL+

We present a 90-dB spurious-free dynamic range sigma–delta modulator (ΣΔM) for asymmetric digital subscriber line applications (both ADSL and ADSL+), with up to a 4.4-MS/s digital output rate. It uses a cascade (MASH) multibit architecture and has been implemented in a 2.5-V supply, 0.25μm CMOS process with metal–insulator–metal capacitors. The prototypes feature 78-dB dynamic range (DR) in the 30-kHz to 2.2-MHz band (ADSL+) and 85-dB DR in the 30-kHz to 1.1-MHz band (ADSL). Integral and differential nonlinearity are within +/-0.85 and +/-0.80 LSB, respectively. The ΣΔ modulator and its auxiliary blocks (clock phase and reference voltage generators, and I/O buffers) dissipate 65.8 mW. Only 55 mW are dissipated in the ΣΔ modulator.This work was supported by the European Union under IST Project 29261/MIXMODEST and IST Project 2001-34283/TAMES-2 and the Spanish MCyT and the ERDF under Project TIC2001-0929/ADAVERE.This work was supported by the European Union under IST Project 29261/MIXMODEST and IST Project 2001-34283/TAMES-2 and the Spanish MCyT and the ERDF under Project TIC2001-0929/ADAVERE.Peer reviewe

Efficient Algorithms for Infrastructure Networks: Planning Issues and Economic Impact

Mei, R.D. van der [Promotor]Bhulai, S. [Copromotor