Modeling and control strategies for a variable reluctance direct-drive motor

A high-performance ripple-free dynamic torque controller for a variable-reluctance (VR) motor intended for trajectory tracking in robotic applications is designed. A modeling approach that simplifies the design of the controller is investigated. Model structure and parameter estimation techniques are presented. Different approaches to the overall torque controller design problem are discussed, and the solution adopted is illustrated. A cascade controller structure consisting of a feedforward nonlinear torque compensator, cascaded to a nonlinear flux or current closed-loop controller is considered, and optimization techniques are used for its design. Although developed for a specific commercial motor, the proposed modeling and optimization strategies can be used for other VR motors with magnetically decoupled phases, both rotating and linear. Laboratory experiments for model validation and preliminary simulation results of the overall torque control system are presente

A prototype controller for variable reluctance motors

A three-level cascade structure is proposed for the control of a variable reluctance (VR) motor. In order to deal with the highly nonlinear behavior of VR motors, the controlling system includes two variable-structure controllers for current and velocity loops as well as an intermediate torque-sharing compensator. The intermediate compensator has been designed by means of nonlinear optimization techniques in order to reduce the torque ripple and to get the maximum motor velocity. The proposed controller has been validated through extensive simulation experiments. The architecture of a prototype controller is presented and the actual performance measured on a VR motor is discussed in comparison with simulations. The results show practical feasibility and good performance of the proposed controller, which is also suitable for a very simple and quite inexpensive fully hardware implementatio

Control of switched reluctance machines

This thesis is concerned with the control of switched reluctance machines for both motoring and generating applications. There are different control objectives in each case. For motoring operation, there are two possible control objectives. If the SRM is being employed in a servo-type application, the desire is for a constant output torque. However, for low performance applications where some amount of torque ripple is acceptable, the aim is to achieve efficient and accurate speed regulation. When the SRM is employed for generating purposes, the goal is to maintain the dc bus voltage at the required value while achieving maximum efficiency. Preliminary investigative work on switched reluctance machine control in both motoring and generating modes is performed. This includes the implementation and testing through simulation of two control strategies described in the literature. In addition, an experimental system is built for the development and testing of new control strategies. The inherent nonlinearity of the switched reluctance machine results in ripple in the torque profile. This adversely affects motoring performance for servo-type applications. Hence, three neuro-fuzzy control strategies for torque ripple minimisation in switched reluctance motors are developed. For all three control strategies, the training of a neurofuzzy compensator and the incorporation of the trained compensator into the overall switched reluctance drive are described. The performance of the control strategies in reducing the torque ripple is examined with simulations and through experimental testing. While the torque ripple is troublesome for servo-type applications, there are some applications where a certain amount of torque ripple is acceptable. Therefore, four simple motor control strategies for torque ripple-tolerant applications are described and tested experimentally. Three of the control strategies are for low speed motoring operation while the fourth is aimed at high speed motoring operation. Finally, three closed-loop generator control strategies aimed at high speed operation in single pulse mode are developed. The three control strategies are examined by testing on the experimental system. A comparison of the performance of the control strategies in terms of efficiency and peak current produced by each is presented

High-Performance Control of Switched Reluctance Motors

A general high bandwidth, low ripple, instantaneous torque control strategy with a variable field-angle for extended constant-power speed range is presented. The strategy is based on the SR motor's electromagnetic characteristics measured at the motor terminals and is the nearest functional equivalent to AC vector control for this type of machine. Low torque ripple and high bandwidth are achieved over a wide range of speeds and a constant power range of 3:1. The proposed controller, which is applicable to most SR motors, is found to reduce the torque ripple by a factor of 5 in comparison with conventional square-wave current operation, and has been operated over a speed range of 1:6000