Modeling and Control of Magnetostrictive-actuated Dynamic Systems

Magnetostrictive actuators featuring high energy densities, large strokes and fast responses appear poised to play an increasingly important role in the field of nano/micro positioning applications. However, the performance of the actuator, in terms of precision, is mainly limited by 1) inherent hysteretic behaviors resulting from the irreversible rotation of magnetic domains within the magnetostrictive material; and 2) dynamic responses caused by the inertia and flexibility of the magnetostrictive actuator and the applied external mechanical loads. Due to the presence of the above limitations, it will prevent the magnetostrictive actuator from providing the desired performance and cause the system inaccuracy. This dissertation aims to develop a modeling and control methodology to improve the control performance of the magnetostrictive-actuated dynamic systems. Through thorough experimental investigations, a dynamic model based on the physical principle of the magnetostrictive actuator is proposed, in which the nonlinear hysteresis effect and the dynamic behaviors can both be represented. Furthermore, the hysteresis effect of the magnetostrictive actuator presents asymmetric characteristics. To capture these characteristics, an asymmetric shifted Prandtl-Ishlinskii (ASPI) model is proposed, being composed by three components: a Prandtl-Ishlinskii (PI) operator, a shift operator and an auxiliary function. The advantages of the proposed model are: 1) it is able to represent the asymmetric hysteresis behavior; 2) it facilitates the construction of the analytical inverse; 3) the analytical expression of the inverse compensation error can also be derived. The validity of the proposed ASPI model and the entire dynamic model was demonstrated through experimental tests on the magnetostrictive-actuated dynamic system. According to the proposed hysteresis model, the inverse compensation approach is applied for the purpose of mitigating the hysteresis effect. However, in real systems, there always exists a modeling error between the hysteresis model and the true hysteresis. The use of an estimated hysteresis model in deriving the inverse compensator will yield some degree of hysteresis compensation error. This error will cause tracking error in the closed-loop control system. To accommodate such a compensation error, an analytical expression of the inverse compensation error is derived first. Then, a prescribed adaptive control method is developed to suppress the compensation error and simultaneously guaranteeing global stability of the closed loop system with a prescribed transient and steady-state performance of the tracking error. The effectiveness of the proposed control scheme is validated on the magnetostrictive-actuated experimental platform. The experimental results illustrate an excellent tracking performance by using the developed control scheme

Motion Control of Smart Material Based Actuators: Modeling, Controller Design and Experimental Evaluation

Smart material based actuators, such as piezoelectric, magnetostrictive, and shape memory alloy actuators, are known to exhibit hysteresis effects. When the smart actuators are preceded with plants, such non-smooth nonlinearities usually lead to poor tracking performance, undesired oscillation, or even potential instability in the control systems. The development of control strategies to control the plants preceded with hysteresis actuators has become to an important research topic and imposed a great challenge in the control society. In order to mitigate the hysteresis effects, the most popular approach is to construct the inverse to compensate such effects. In such a case, the mathematical descriptions are generally required. In the literature, several mathematical hysteresis models have been proposed. The most popular hysteresis models perhaps are Preisach model, Prandtl-Ishlinskii model, and Bouc-Wen model. Among the above mentioned models, the Prandtl-Ishlinskii model has an unique property, i.e., the inverse Prandtl-Ishlinskii model can be analytically obtained, which can be used as a feedforward compensator to mitigate the hysteresis effect in the control systems. However, the shortcoming of the Prandtl-Ishlinskii model is also obvious because it can only describe a certain class of hysteresis shapes. Comparing to the Prandtl-Ishlinskii model, a generalized Prandtl-Ishlinskii model has been reported in the literature to describe a more general class of hysteresis shapes in the smart actuators. However, the inverse for the generalized Prandtl-Ishlinskii model has only been given without the strict proof due to the difficulty of the initial loading curve construction though the analytic inverse of the Prandtl-Ishlinskii model is well documented in the literature. Therefore, as a further development, the generalized Prandtl-Ishlinskii model is re-defined and a modified generalized Prandtl-Ishlinskii model is proposed in this dissertation which can still describe similar general class of hysteresis shapes. The benefit is that the concept of initial loading curve can be utilized and a strict analytical inverse model can be derived for the purpose of compensation. The effectiveness of the obtained inverse modified generalized Prandtl-Ishlinskii model has been validated in the both simulations and in experiments on a piezoelectric micropositioning stage. It is also affirmed that the proposed modified generalized Prandtl-Ishlinskii model fulfills two crucial properties for the operator based hysteresis models, the wiping out property and the congruency property. Usually the hysteresis nonlinearities in smart actuators are unknown, the direct open-loop feedforward inverse compensation will introduce notably inverse compensation error with an estimated inverse construction. A closed-loop adaptive controller is therefore required. The challenge in fusing the inverse compensation and the robust adaptive control is that the strict stability proof of the closed loop control system is difficult to obtain due to the fact that an error expression of the inverse compensation has not been established when the hysteresis is unknown. In this dissertation research, by developing the error expression of the inverse compensation for modified generalized Prandtl-Ishlinskii model, two types of inverse based robust adaptive controllers are designed for a class of uncertain systems preceded by a smart material based actuator with hysteresis nonlinearities. When the system states are available, an inverse based adaptive variable structure control approach is designed. The strict stability proof is established thereafter. Comparing with other works in the literature, the benefit for such a design is that the proposed inverse based scheme can achieve the tracking without necessarily adapting the uncertain parameters (the number could be large) in the hysteresis model, which leads to the computational efficiency. Furthermore, an inverse based adaptive output-feedback control scheme is developed when the exactly knowledge of most of the states is unavailable and the only accessible state is the output of the system. An observer is therefore constructed to estimate the unavailable states from the measurements of a single output. By taking consideration of the analytical expression of the inverse compensation error, the global stability of the close-loop control system as well as the required tracking accuracy are achieved. The effectiveness of the proposed output-feedback controller is validated in both simulations and experiments

Dual sensing-actuation artificial muscle based on polypyrrole-carbon nanotube composite

Dual sensing artificial muscles based on conducting polymer are faradaic motors driven by electrochemical reactions, which announce the development of proprioceptive devices. The applicability of different composites has been investigated with the aim to improve the performance. Addition of carbon nanotubes may reduce irreversible reactions. We present the testing of a dual sensing artificial muscle based on a conducting polymer and carbon nanotubes composite. Large bending motions (up to 127 degrees) in aqueous solution and simultaneously sensing abilities of the operation conditions are recorded. The sensing and actuation equations are derived for incorporation into a control system.The research was supported by European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 641822

Design, Fabrication, Modeling and Control of Artificial Muscle Actuated Wrist Joint System

This research dissertation presents the design, fabrication, modeling and control of an artificial muscle (AM) actuated wrist joint system, i.e., a thermoelectric (TEM) antagonistically driven shape memory alloy (SMA) actuator, to mimic the muscle behavior of human beings. In the developed AM based wrist joint system, the SMA, exhibiting contraction and relaxation corresponding to its temperature, is utilized as the actuator in the AM. Similar to the nerve stimulation, TEM is introduced to provide heat stimulation to the SMA, which involves heating and cooling of the SMA. SMA possesses superelastic behavior that provides a large force over its weight and effective strain in practical applications. However, such superior material has been underutilized due to its high nonlinear hysteresis behavior, strongly affected by the loading stress. Using the data obtained from the experiments, based on the Prandtl-Ishlinskii (PI) model, a Stress-Dependent Generalized Prandtl-Ishlinskii (SD-GPI) model is proposed, which can describe the hysteresis behavior of the SMA under the influence of various stresses. The parameters of the SD-GPI models at various stresses are obtained using a fitting function from the Matlab. The simulation results of the SD-GPI showed that prediction error is achieved at mean values of ±2% and a standard deviation of less than 7%. Meanwhile, the TEM model is also developed based on the heat balance theory. The model parameters are identified via experimental data using Range-Kutta fourth order integration equation and Matlab curve fitting function. The TEM model has shown a satisfactory temperature prediction. Then, by combining the obtained two models, an integrated model is developed to describe the whole dynamics of the wrist joint system. To control the SMA actuated wrist system, the SD-GPI inverse hysteresis compensator is developed to mitigate the hysteresis effect. However, such a compensator shows errors in compensating the hysteresis effect. Therefore, the inverse hysteresis compensator error and the system tracking error are analyzed, and the adaptive back-stepping based control approach is adopted to develop the inverse based adaptive control for the antagonistic AM wrist joint. Subsequently, a corresponding control law is developed for the TEM system to generate the required temperature obtained from the adaptive controller. Simulations verified the developed approach. Finally, experiments are conducted to verify the proposed system. Input sinusoidal signal with frequency 0.1rad/s and amplitude of ±0.524rad (±30°) is applied to the wrist joint system. Experimental results verified that the TEMs antagonistically driven SMA actuators for artificial muscle resembling wrist joint has been successfully achieved

Design and experimental validation of a piezoelectric actuator tracking control based on fuzzy logic and neural compensation

This work proposes two control feedback-feedforward algorithms, based on fuzzy logic in combination with neural networks, aimed at reducing the tracking error and improving the actuation signal of piezoelectric actuators. These are frequently used devices in a wide range of applications due to their high precision in micro- and nanopositioning combined with their mechanical stiffness. Nevertheless, the hysteresis is one the main phenomenon that degrades the performance of these actuators in tracking operations. The proposed control schemes were tested experimentally in a commercial piezoelectric actuator. They were implemented with a dSPACE 1104 device, which was used for signal generation and acquisition purposes. The performance of the proposed control schemes was compared to conventional structures based on proportional-integral-derivative and fuzzy logic in feedback configuration. Experimental results show the advantages of the proposed controllers, since they are capable of reducing the error to significant magnitude orders.The authors wish to express their gratitude to the Basque Government, through the project EKOHEGAZ (ELKARTEK KK-2021/00092), to the Diputación Foral de Álava (DFA), through the project CONAVANTER, and to the UPV/EHU, through the project GIU20/063, for supporting this work

Magneto-Rheological Actuators for Human-Safe Robots: Modeling, Control, and Implementation

In recent years, research on physical human-robot interaction has received considerable attention. Research on this subject has led to the study of new control and actuation mechanisms for robots in order to achieve intrinsic safety. Naturally, intrinsic safety is only achievable in kinematic structures that exhibit low output impedance. Existing solutions for reducing impedance are commonly obtained at the expense of reduced performance, or significant increase in mechanical complexity. Achieving high performance while guaranteeing safety seems to be a challenging goal that necessitates new actuation technologies in future generations of human-safe robots. In this study, a novel two degrees-of-freedom safe manipulator is presented. The manipulator uses magneto-rheological fluid-based actuators. Magneto-rheological actuators offer low inertia-to-torque and mass-to-torque ratios which support their applications in human-friendly actuation. As a key element in the design of the manipulator, bi-directional actuation is attained by antagonistically coupling MR actuators at the joints. Antagonistically coupled MR actuators at the joints allow using a single motor to drive multiple joints. The motor is located at the base of the manipulator in order to further reduce the overall weight of the robot. Due to the unique characteristic of MR actuators, intrinsically safe actuation is achieved without compromising high quality actuation. Despite these advantages, modeling and control of MR actuators present some challenges. The antagonistic configuration of MR actuators may result in limit cycles in some cases when the actuator operates in the position control loop. To study the possibility of limit cycles, describing function method is employed to obtain the conditions under which limit cycles may occur in the operation of the system. Moreover, a connection between the amplitude and the frequency of the potential limit cycles and the system parameters is established to provide an insight into the design of the actuator as well as the controller. MR actuators require magnetic fields to control their output torques. The application of magnetic field however introduces hysteresis in the behaviors of MR actuators. To this effect, an adaptive model is developed to estimate the hysteretic behavior of the actuator. The effectiveness of the model is evaluated by comparing its results with those obtained using the Preisach model. These results are then extended to an adaptive control scheme in order to compensate for the effect of hysteresis. In both modeling and control, stability of proposed schemes are evaluated using Lyapunov method, and the effectiveness of the proposed methods are validated with experimental results

Modeling and Control of Piezoelectric Actuators

Piezoelectric actuators (PEAs) utilize the inverse piezoelectric effect to generate fine displacement with a resolution down to sub-nanometers and as such, they have been widely used in various micro- and nanopositioning applications. However, the modeling and control of PEAs have proven to be challenging tasks. The main difficulties lie in the existence of various nonlinear or difficult-to-model effects in PEAs, such as hysteresis, creep, and distributive vibration dynamics. Such effects can seriously degrade the PEA tracking control performances or even lead to instability. This raises a great need to model and control PEAs for improved performance. This research is aimed at developing novel models for PEAs and on this basis, developing model-based control schemes for the PEA tracking control taking into account the aforementioned nonlinear effects. In the first part of this research, a model of a PEA for the effects of hysteresis, creep, and vibration dynamics was developed. Notably, the widely-used Preisach hysteresis model cannot represent the one-sided hysteresis of PEAs. To overcome this shortcoming, a rate-independent hysteresis model based on a novel hysteresis operator modified from the Preisach hysteresis operator was developed, which was then integrated with the models of creep and vibration dynamics to form a comprehensive model for PEAs. For its validation, experiments were carried out on a commercially-available PEA and the results obtained agreed with those from model simulations. By taking into account the linear dynamics and hysteretic behavior of the PEA as well as the presliding friction between the moveable platform and the end-effector, a model of the piezoelectric-driven stick-slip (PDSS) actuator was also developed in the first part of the research. The effectiveness of the developed model was illustrated by the experiments on the PDSS actuator prototyped in the author's lab. In the second part of the research, control schemes were developed based on the aforementioned PEA models for tracking control of PEAs. Firstly, a novel PID-based sliding mode (PIDSM) controller was developed. The rational behind the use of a sliding mode (SM) control is that the SM control can effectively suppress the effects of matched uncertainties, while the PEA hysteresis, creep, and external load can be represented by a lumped matched uncertainty based on the developed model. To solve the chattering and steady-state problems, associated with the ideal SM control and the SM control with boundary layer (SMCBL), the novel PIDSM control developed in the present study replaces the switching control term in the ideal SM control schemes with a PID regulator. Experiments were carried out on a commercially-available PEA and the results obtained illustrate the effectiveness of the PIDSM controller, and its superiorities over other schemes of PID control, ideal SM control, and the SMCBL in terms of steady state error elimination, chattering suppression, and tracking error suppression. Secondly, a PIDSM observer was also developed based on the model of PEAs to provide the PIDSM controller with state estimates of the PEA. And the PIDSM controller and the PIDSM observer were combined to form an integrated control scheme (PIDSM observer-controller or PIDSMOC) for PEAs. The effectiveness of the PIDSM observer and the PIDSMOC were also validated experimentally. The superiority of the PIDSMOC over the PIDSM controller with σ-β filter control scheme was also analyzed and demonstrated experimentally. The significance of this research lies in the development of novel models for PEAs and PDSS actuators, which can be of great help in the design and control of such actuators. Also, the development of the PIDSM controller, the PIDSM observer, and their integrated form, i.e., PIDSMOC, enables the improved performance of tracking control of PEAs with the presence of various nonlinear or difficult-to-model effects

Design and control of a self-sensing piezoelectric reticle assist device

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2013.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student-submitted PDF version of thesis.Includes bibliographical references (p. 233-239).This thesis presents the design and control techniques of a device for managing the inertial loads on photoreticle of lithography scanners. Reticle slip, resulting from large inertial loads, is a factor limiting the throughput and accuracy of the lithography scanners. Our reticle-assist device completely eliminates reticle slip by carrying 96% of the inertial loads. The primary contributions of this thesis include the design and implementation of a practical high-force density reticle assist device, the development of a novel charge-controlled power amplifier with DC hysteresis compensation, and the development of a sensorless control method. A lithography scanner exposes a wafer by sweeping a slit of light passing through a reticle. The scanner controls the motion of the reticle and the wafer. The reticle-stage moves the photoreticle. To avoid deforming the reticle, it is held using a vacuum clamp. Each line scan consists of acceleration at the ends of the line and a constant-speed motion in the middle of the line, where exposure occurs. If the reticle's inertial force approaches or exceeds the clamp's limit, nanometer-level pre-sliding slip or sliding slip will occur. The assist device carries the inertial load by exerting a feedforward force on the reticle's edge. The device retracts back during the sensitive exposure interval to avoid disturbing the reticle. The reticle is at the heart of the scanner, where disturbances directly affect the printing accuracy. Our reticle assist device consists of an approach mechanism and a piezoelectric stack actuator. The approach mechanism positions the actuator 1-m from the reticle edge. The actuator, with 15-[mu]m range, extends to push on the reticle. We have developed control techniques to enable high-precision high-bandwidth force compensation without using any sensors. We have also developed a novel charge-controlled amplifier with a more robust feedback circuit and a method for hysteresis compensation at DC. These technologies were key to achieving high-bandwidth high-precision sensorless force control. When tested with a trapezoidal force profile with 6400 N/s rate and 60 N peak force, the device canceled 96% of the inertial force.by Darya Amin-Shahidi.Ph.D