9 research outputs found

    Mobile Speed Estimation for Broadband Wireless Communications

    Get PDF
    In this paper, a new algorithm is proposed to estimate mobile speed for broadband wireless communications, which often encounter large number of fading channel taps causing severe intersymbol interference. Theoretical analysis is first derived and practical algorithm is proposed based on the analytical results. The algorithm employs a modified auto-covariance of received signal power to estimate the speed of mobiles. The algorithm is based on the received signals which contain unknown transmitted data, unknown frequency selective multipaths possibly including line-of-sight (LOS) component, and random receiver noise. The algorithm works well for frequency selective Rayleigh and Rician channels. The algorithm is very resistant to noise, it provides accurate speed estimation even if the signal-to-noise (SNR) is as low as 0dB. Simulation results indicate that the new algorithm is very reliable and effective to estimation mobile speed corresponding maximum Doppler up to 500Hz. The algorithm has high computational efficiency and low estimation latency, with results being available within one second after communication is established

    Doppler Spread Estimation for Broadband Wireless OFDM Systems

    Get PDF
    In this paper, we present a new Doppler spread estimation algorithm for broadband wireless orthogonal frequency division multiplexing (OFDM) systems with time-varying and frequency-selective Rayleigh fading. The algorithm is developed by analyzing the statistical properties of the power of received signals in the time domain, thus it excludes the influence of inter- carrier interference introduced by channel variation within one OFDM symbol. The operation of the algorithm doesn\u27t require the knowledge of fading coefficients, transmitted data symbols, or signal-to-noise ratio (SNR). It works well under time-selective and frequency-selective Rayleigh fading channel with SNR as low as 0 dB. Moreover, unlike existing algorithms, the proposed algorithm takes into considerations of the discrete-time channel inter-tap correlation, as the case in practical systems. Simulation results demonstrate that this new algorithm can accurately estimate a wide range of Doppler spread with low estimation latency and high computational efficiency

    Frequency-Domain Channel Estimation and Equalization for Broadband Wireless Communications

    Get PDF
    Frequency-domain equalization (FDE) is an effective technique for high data rate wireless communication systems suffering from very long intersymbol interference. Most of existing FDE algorithms are limited to quasi-static or slow time-varying fading channels, where least mean squares (LMS) or recursive least squares (RLS) adaptive algorithms were utilized for channel estimation. In this paper, we employ interpolation method to develop channel estimation algorithm in the frequency domain. We show that the new channel estimation algorithm can significantly outperform LMS and RLS algorithms. Numerical examples demonstrate that the new algorithm can track time-varying fading channels with Doppler up to 300-400 Hz. This means, for 1.9 GHz carrier frequency band, the new algorithm can provide good bit error rate performance even if the mobile is moving at a high speed of 170-228 kilo-meters per hour, while the fading channel impulse response is 60 taps long

    Network-Based UE Mobility Estimation in Mobile Networks

    Get PDF
    International audienceThe coexistence of small cells and macro cells is a key feature of 4G and future networks. This heterogeneity, together with the increased mobility of user devices can generate a high handover frequency that could lead to unreasonably high call drop probability or poor user experience. By performing smart mobility management, the network can pro-actively adapt to the user and guarantee seamless and smooth cell transitions. In this work, we introduce an algorithm that takes as input sounding reference signal (SRS) measurements available at the base station (eNodeB in 4G systems) to estimate with a low computational requirement the mobility level of the user and with no modification at the user device/equipment (UE) side. The performance of the algorithm is showcased using realistic data and mobility traces. Results show that the classification of UE speed to three mobility classes can be achieved with accuracy of 87% for low mobility, 93% for medium mobility, and 94% for high mobility, respectively

    Channel Estimation for Frequency-Domain Equalization of Single Carrier Broadband Wireless Communications

    Get PDF
    Frequency-domain equalization (FDE) is an effective technique for high data rate wireless communication systems suffering from very long intersymbol interference. Most of existing FDE algorithms are limited to slow time-varying fading channels due to lack of accurate channel estimator. In this paper, we employ interpolation method to propose new algorithms for frequency-domain channel estimation for both slow and fast timevarying fading.We show that least squares-based channel estimation and minimum mean square error-based channel estimation with interpolations are equivalent under certain conditions. Noise variance estimation and channel equalization in the frequency domain are also discussed with fine-tuned formulas. Numerical examples indicate that the new algorithms perform very well for severe fading channels with long delay spread and high Doppler spread. It is also shown that our new algorithms outperform recently developed frequency-domain least mean squares (LMS) and recursive least squares (RLS) algorithms which are capable of dealing with moderate fading channels

    Online Mobile User Speed Estimation: Performance and Tradeoff Considerations

    Get PDF
    International audienceThis paper presents an online algorithm for mobile user speed estimation in 3GPP Long Term Evolution (LTE)/LTE-Advanced (LTE-A) networks. The proposed method leverages on uplink (UL) sounding reference signal (SRS) power measurements performed at the base station, also known as eNodeB (eNB), and remains effective even under large sampling period. Extensive performance evaluation of the proposed algorithm is carried out using field traces from realistic environment. The on-line solution is proven highly efficient in terms of computational requirement, estimation delay, and accuracy. In particular, we show that the proposed algorithm can allow for the first speed estimation to be obtained after 10 seconds and with an average speed underestimation error of 14 kmph. After the first speed acquisition, subsequent speed estimations can be obtained much faster (e.g., each second) with limited implementation cost and still provide high accuracy

    Mobile Speed Estimation for Broadband Wireless Communications

    No full text

    Mobile Speed Estimation for Broadband Wireless Communications Over Rician Fading Channels

    Get PDF
    In this paper, a new algorithm is proposed to estimate mobile speed for broadband wireless communications, which often encounter large number of fading channel taps causing severe intersymbol interference. Different from existing algorithms, which commonly assume that the fading channel coefficients are available for the speed estimators, the proposed algorithm is based on the received signals which contain unknown transmitted data, unknown frequency selective fading channel coefficients possibly including line-of-sight (LOS) components, and random receiver noise. Theoretical analysis is first carried out from the received signals, and a practical algorithm is proposed based on the analytical results. The algorithm employs a modified normalized auto-covariance of received signal power to estimate the speed of mobiles. The algorithm works well for frequency selective Rayleigh and Rician channels. The algorithm is very resistant to noise, it provides accurate speed estimation even if the signal-to-noise ratio (SNR) is as low as 0 dB. Simulation results indicate that the new algorithm is very reliable and effective to estimate mobile speed corresponding to a maximum Doppler up to 500 Hz. The algorithm has high computational efficiency and low estimation latency, with results being available within one second after communication is established
    corecore