Shear-induced α → γ transformation in nanoscale Fe-C composite

High-resolution transmission electron microscopy and three-dimensional atom probe observations show clearly that a reverse transformation of body-centred cubic ferrite to face-centred cubic austenite occurs during severe plastic deformation of a pearlitic steel resulting in a nanocrystalline structure, something that never occurs in conventional deformation of coarse-grained iron and steels. The driving force and the mechanisms of this reverse transformation are discussed. It is shown that nanostructure and shear stresses are essential for this process, and the results confirm molecular dynamics predictions of such transformations in nanocrystalline iron

Heat treatment, microstructure and properties of 75Cr1 steel, for use in heavy loaded elements

This study aims to optimize the heat treatment of tool steel 75Cr1 which is used for heavy loaded elements in transmissions. A salt bath was used to quench and temper the steel at different temperatures. Mechanical tests and microstructural characterization were done to define the heat treatment parameters corresponding to the optimal performance of the elements. Optical microscopy, electron back scatter diffraction and x-ray diffraction were used to characterize the microstructure, while tensile tests and toughness tests were employed to determine the mechanical properties after different heat treatments. It was found that the yield strength decreases with increasing annealing temperature and that the toughness decreases with increasing annealing time and temperature. The changes of the mechanical properties are discussed in relation with the thermal treatment and the corresponding microstructures

Effect of Homogenization Treatment on the Microstructure and Mechanical Property Evolutions of As-Cast Al-Cu Alloy during High-Pressure Torsion

As-cast and homogenization treated as-cast Al-Cu (3 mass% Cu) alloy samples were processed via high-pressure torsion (HPT) under an applied pressure of 8 GPa with 5 revolutions at room temperature. Microstructure, mechanical properties, and fracture surface morphology of the HPT-processed Al-Cu were investigated, demonstrating that the HPT process successfully resulted in distinct grain refinements in both samples. Significant improvements in the microhardness, tensile properties, and deformation homogeneity due to fine grains, high grain boundary misorientation angle, and homogeneous distribution of the theta phase were achieved after the HPT process of the homogenized sample. The homogenization treatment of the as-cast Al-Cu has a significant effect on the fracture surface morphology and fracture mode of the HPT-processed samples.X1110Ysciescopu

Hallmarks of mechanochemistry: From nanoparticles to technology

The aim of this review article on recent developments of mechanochemistry (nowadays established as a part of chemistry) is to provide a comprehensive overview of advances achieved in the field of atomistic processes, phase transformations, simple and multicomponent nanosystems and peculiarities of mechanochemical reactions. Industrial aspects with successful penetration into fields like materials engineering, heterogeneous catalysis and extractive metallurgy are also reviewed. The hallmarks of mechanochemistry include influencing reactivity of solids by the presence of solid-state defects, interphases and relaxation phenomena, enabling processes to take place under non-equilibrium conditions, creating a well-crystallized core of nanoparticles with disordered near-surface shell regions and performing simple dry time-convenient one-step syntheses. Underlying these hallmarks are technological consequences like preparing new nanomaterials with the desired properties or producing these materials in a reproducible way with high yield and under simple and easy operating conditions. The last but not least hallmark is enabling work under environmentally friendly and essentially waste-free conditions (822 references).Slovak Grant Agency VEGA 2/0009/11, 2/0043/11Slovak Agency for Science and Development APVV VV-0189-10, VV-0528-11Russian Foundation for Basic Research 10-03-00942a, 12-03-00651aMinistry of Science and Higher education in Poland CUT/c-1/DS/KWC/2008-2012, PB1T09B02330, NN209145136, NN20914893

Fundamentals of interface phenomena in advanced bulk nanoscale materials

The review is devoted to a study of interface phenomena influencing advanced properties of nanoscale materials processed by means of severe plastic deformation, high-energy ball milling and their combinations. Interface phenomena include processes of interface defect structure relaxation from a highly nonequilibrium state to an equilibrium condition, grain boundary phase transformations and enhanced grain boundary and triple junction diffusivity. On the basis of an experimental investigation, a theoretical description of the key interfacial phenomena controlling the functional properties of advanced bulk nanoscale materials has been conducted. An interface defect structure investigation has been performed by TEM, high-resolution x-ray diffraction, atomic simulation and modeling. The problem of a transition from highly non-equilibrium state to an equilibrium one, which seems to be responsible for low thermostability of nanoscale materials, was studied. Also enhanced grain boundary diffusivity is addressed. Structure recovery and dislocation emission from grain boundaries in nanocrystalline materials have been investigated by analytical methods and modeling

Effects of surfaces nanocrystallization induced by shot peening on material properties : a Review

A brief description of surface nanosrystallization process via severe plastic deformation is presented. To come to the point different shot peening methods which have proved to be able to create nanocrystalline layers are demonstrated clarifying the actual state of the art. Then the influence of the process is reviewed on material behavior and a wide range of affected properties are investigated. On this basis some possible addresses for future research in this field are drawn and underlined

Equal Channel Angular Extrusion Characteristics on Mechanical Behavior of Aluminum Alloy

Materials strengthened by conventional methods such as strain hardening, solute additions, precipitation and grain size refinement are often adopted in industrial processes. But there is limitation to the amount of deformation that these conventional methods can impact to a material. This study focused on the review of major mechanical properties of aluminum alloys in the presence of an ultrafine grain size into polycrystalline materials by subjecting the metal to an intense plastic straining through simple shear without any corresponding change in the cross-sectional dimensions of the sample. The effect of the heavy strain rate on the microstructure of aluminum alloys was in refinement of the coarse grains into ultrafine grain size by introducing a high density of dislocations and subsequently re-arranging the dislocations to form an array of grain boundaries. Hence, this investigation is aimed at gathering contributions on the influence of equal channel angular extrusion toward improving the mechanical properties of the aluminum alloys through intense plastic strain