NASA Thesaurus Supplement: A three part cumulative supplement to the 1982 edition of the NASA Thesaurus (supplement 3)

The three part cumulative NASA Thesaurus Supplement to the 1982 edition of the NASA Thesaurus includes Part 1, Hierarchical Listing, Part 2, Access Vocabulary, and Part 3, Deletions. The semiannual supplement gives complete hierarchies for new terms and includes new term indications for entries new to this supplement

NASA Thesaurus Supplement: A three part cumulative supplement to the 1982 edition of the NASA Thesaurus (supplement 2)

The three part cumulative NASA Thesaurus Supplement to the 1982 edition of the NASA Thesaurus includes: part 1, hierarchical listing; part 2, access vocabulary, and part 3, deletions. The semiannual supplement gives complete hierarchies for new terms and includes new term indications for terms new to this supplement

Range-only underwater target localization : error characterization

Locating a target from range measurements using only one mobile transducer has been increased over the last years. This method allows us to reduce the high costs of deployment and maintenance of traditional fixed systems on the seafloor such as Long Baseline. The range-only single-beacon is one of the new architectures developed using the new capabilities of modern acoustic underwater modems, which can be time synchronization, time stamp, and range measurements. This document presents a method to estimate the sources of error in this type of architecture so as to obtain a mathematical model which allows us to develop simulations and study the best localization algorithms. Different simulations and real field tests have been carried out in order to verify a good performance of the model proposed.Postprint (published version

Index to NASA Tech Briefs, 1975

This index contains abstracts and four indexes--subject, personal author, originating Center, and Tech Brief number--for 1975 Tech Briefs

Architecture of a network-in-the-Loop environment for characterizing AC power system behavior

This paper describes the method by which a large hardware-in-the-loop environment has been realized for three-phase ac power systems. The environment allows an entire laboratory power-network topology (generators, loads, controls, protection devices, and switches) to be placed in the loop of a large power-network simulation. The system is realized by using a realtime power-network simulator, which interacts with the hardware via the indirect control of a large synchronous generator and by measuring currents flowing from its terminals. These measured currents are injected into the simulation via current sources to close the loop. This paper describes the system architecture and, most importantly, the calibration methodologies which have been developed to overcome measurement and loop latencies. In particular, a new "phase advance" calibration removes the requirement to add unwanted components into the simulated network to compensate for loop delay. The results of early commissioning experiments are demonstrated. The present system performance limits under transient conditions (approximately 0.25 Hz/s and 30 V/s to contain peak phase-and voltage-tracking errors within 5. and 1%) are defined mainly by the controllability of the synchronous generator

Time domain analysis of switching transient fields in high voltage substations

Switching operations of circuit breakers and disconnect switches generate transient currents propagating along the substation busbars. At the moment of switching, the busbars temporarily acts as antennae radiating transient electromagnetic fields within the substations. The radiated fields may interfere and disrupt normal operations of electronic equipment used within the substation for measurement, control and communication purposes. Hence there is the need to fully characterise the substation electromagnetic environment as early as the design stage of substation planning and operation to ensure safe operations of the electronic equipment. This paper deals with the computation of transient electromagnetic fields due to switching within a high voltage air-insulated substation (AIS) using the finite difference time domain (FDTD) metho

OAM multiple transmission using uniform circular arrays: numerical modeling and experimental verification with two digital television signals

In this work we present the outcomes of a radio-frequency OAM transmission between two antenna arrays performed in a real-world context. The analysis is supplemented by deep simulative investigations able to provide both a preliminary overview of the experimental scenario and a posteriori validation of the achieved results. As a first step, the far-field OAM communication link is tested at various frequencies and the corresponding link budget is studied by means of an angular scan generated by the rotation of the receiving system. Then, on the same site, two digital television signals encoded as OAM modes ($\ell$=1 and $\ell$=-1) are simultaneously transmitted at a common frequency of 198.5 MHz with good mode insulation.Comment: 16 pages, 14 figure