Balanced Modulation for Nonvolatile Memories

This paper presents a practical writing/reading scheme in nonvolatile memories, called balanced modulation, for minimizing the asymmetric component of errors. The main idea is to encode data using a balanced error-correcting code. When reading information from a block, it adjusts the reading threshold such that the resulting word is also balanced or approximately balanced. Balanced modulation has suboptimal performance for any cell-level distribution and it can be easily implemented in the current systems of nonvolatile memories. Furthermore, we studied the construction of balanced error-correcting codes, in particular, balanced LDPC codes. It has very efficient encoding and decoding algorithms, and it is more efficient than prior construction of balanced error-correcting codes

New Combinatorial Construction Techniques for Low-Density Parity-Check Codes and Systematic Repeat-Accumulate Codes

This paper presents several new construction techniques for low-density parity-check (LDPC) and systematic repeat-accumulate (RA) codes. Based on specific classes of combinatorial designs, the improved code design focuses on high-rate structured codes with constant column weights 3 and higher. The proposed codes are efficiently encodable and exhibit good structural properties. Experimental results on decoding performance with the sum-product algorithm show that the novel codes offer substantial practical application potential, for instance, in high-speed applications in magnetic recording and optical communications channels.Comment: 10 pages; to appear in "IEEE Transactions on Communications

Binary balanced codes approaching capacity

Abstract: In this paper, the construction of binary balanced codes is revisited. Binary balanced codes refer to sets of bipolar codewords where the number of “1”s in each codeword equals that of “0”s. The first algorithm for balancing codes was proposed by Knuth in 1986; however, its redundancy is almost two times larger than that of the full set of balanced codewords. We will present an efficient and simple construction with a redundancy approaching the minimal achievable one

On the Existence of MDS Codes Over Small Fields With Constrained Generator Matrices

We study the existence over small fields of Maximum Distance Separable (MDS) codes with generator matrices having specified supports (i.e. having specified locations of zero entries). This problem unifies and simplifies the problems posed in recent works of Yan and Sprintson (NetCod'13) on weakly secure cooperative data exchange, of Halbawi et al. (arxiv'13) on distributed Reed-Solomon codes for simple multiple access networks, and of Dau et al. (ISIT'13) on MDS codes with balanced and sparse generator matrices. We conjecture that there exist such $[n,k]_q$ MDS codes as long as $q \geq n + k - 1$, if the specified supports of the generator matrices satisfy the so-called MDS condition, which can be verified in polynomial time. We propose a combinatorial approach to tackle the conjecture, and prove that the conjecture holds for a special case when the sets of zero coordinates of rows of the generator matrix share with each other (pairwise) at most one common element. Based on our numerical result, the conjecture is also verified for all $k \leq 7$. Our approach is based on a novel generalization of the well-known Hall's marriage theorem, which allows (overlapping) multiple representatives instead of a single representative for each subset.Comment: 8 page

New Protograph-Based Construction of GLDPC Codes for Binary Erasure Channel and LDPC Codes for Block Fading Channel

학위논문(박사) -- 서울대학교대학원 : 공과대학 전기·정보공학부, 2022.2. 노종선 교수님.이 학위 논문에서는 다음 두 가지의 연구가 이루어졌다: i) 이진 소실 채널에서 새로운 구조의 프로토그래프 기반 generalized low-density parity-check (GLDPC) 부호의 설계 방법 ii) 블록 페이딩 채널을 위한 프로토그래프 기반의 LDPC 부호 설계. 첫 번째로, 이진 소실 채널에서 새롭게 제안된 부분적 도핑 기법을 이용한 프로토그래프 기반의 GLDPC 부호가 제안되었다. 기존의 프로토그래프 기반의 GLDPC 부호의 경우 프로토그래프 영역에서 single parity-check (SPC) 노드를 generalized constraint (GC) 노드로 치환(도핑)하는 형태로 부호가 설계되어 여러 변수 노드 걸쳐 GC 노드가 연결되는 형태를 가진다. 반면, 제안된 부분적 도핑 기법은 한 개의 변수 노드에 GC 노드를 연결하도록 만들 수 있다. 바꿔 말하면, 제안된 부분적 도핑 기법은 더 세밀한 도핑이 가능해서 결과적으로 부호 설계에 있어 높은 자유도를 가지고 더 세련된 부호 최적화가 가능하다. 본 학위 논문에서는 부분적 도핑과 PEXIT 분석을 이용하여 partially doped GLDPC (PD-GLDPC) 부호를 설계하고 최적화 하였다. 더불어, PD-GLDPC 부호의 일반적 최소 거리를 가지는 조건을 제시하였고 이를 이 론적으로 증명하였다. 결과적으로, 제안된 PD-GLDPC 부호는 현존하는 GLDPC 부호의 성능보다 유의미하게 워터플 성능이 좋았고 동시에 오류 마루가 없었다. 마지막으로, 최적화된 PD-GLDPC 부호는 현존하는 최신 블록 LDPC 부호들에 근접한 성능을 가짐을 보여주었다. 두 번째로, 블록 페이딩 (BF) 채널에서 resolvable block design (RBD)를 이용한 프로토그래프 LDPC 부호 설계가 이루어졌다. 제안된 부호의 성능을 확인하기 위한 비트 오류율의 상한을 감마 진화라는 제안된 기법을 이용해 유도하였다. 또한, 시뮬레이션을 통해 유도된 오류율 상한과 부호의 프레임 오류율이 높은 SNR 영역에서 채널 outage 확률에 근접함을 알 수 있다.In this dissertation, two main contributions are given as: i) new construction methods for protograph-based generalized low-density parity-check (GLDPC) codes for the binary erasure channel using partial doping technique and ii) new design of protograph-based low-density parity-check (LDPC) codes for the block fading channel using resolvable block design. First, a new code design technique, called partial doping, for protograph-based GLDPC codes is proposed. While the conventional construction method of protograph-based GLDPC codes is to replace some single parity-check (SPC) nodes with generalized constraint (GC) nodes applying to multiple connected variable nodes (VNs) in the protograph, the proposed technique of partial doping can select any number of partial VNs in the protograph to be protected by GC nodes. In other words, the partial doping technique enables finer tuning of doping, which gives higher degrees of freedom in the code design and enables a sophisticated code optimization. The proposed partially doped GLDPC (PD-GLDPC) codes are constructed using the partial doping technique and optimized by the protograph extrinsic information transfer (PEXIT) analysis. In addition, the condition guaranteeing the linear minimum distance growth of the PD-GLDPC codes is proposed and analytically proven so that the PD-GLDPC code ensembles satisfying this condition have the typical minimum distance. Consequently, the proposed PD-GLDPC codes outperform the conventional GLDPC codes with a notable improvement in the waterfall performance and without the error floor phenomenon. Finally, the PD-GLDPC codes are shown to achieve a competitive performance compared to the existing state-of-the-art block LDPC codes. Second, the protograph-based LDPC codes constructed from resolvable balanced incomplete block design (RBIBD) are designed and proposed for block fading (BF) channel. In order to analyze the performance of the proposed LDPC codes, the upper bounds on bit error rate (BER) using the novel method called gamma evolution are derived. In addition, the numerical analysis shows that the upper bound and the frame error rate (FER) of the proposed LDPC codes approach the channel outage probability in a finite signal-to-noise ratio (SNR) region.1 INTRODUCTION 1 1.1 Background 1 1.2 Overview of Dissertation 3 2 Overview of LDPC Codes 5 2.1 LDPC Codes 5 2.2 Decoding of LDPC Codes in the BEC 7 2.3 Analysis tool for LDPC Codes 8 2.3.1 Density Evolution 8 2.4 Protograph-Based LDPC Codes 9 3 Construction of Protograph-Based Partially Doped Generalized LDPC Codes 11 3.1 Code Structure of Protograph-Based GLDPC Ensembles 14 3.1.1 Construction of Protograph Doped GLDPC Codes 14 3.1.2 PEXIT Analysis and Decoding Process of Protograph Doped GLDPC Codes 15 3.2 The Proposed PD-GLDPC Codes 18 3.2.1 Construction Method of PD-GLDPC Codes 18 3.2.2 PEXIT Analysis of PD-GLDPC Codes 22 3.2.3 Condition for the Existence of the Typical Minimum Distance of the PD-GLDPC Code Ensemble 23 3.2.4 Comparison between Proposed PD-GLDPC Codes and Protograph Doped GLDPC Codes 25 3.3 Optimization of PD-GLDPC Codes 26 3.3.1 Construction of PD-GLDPC Codes from Regular Protographs 26 3.3.2 Differential Evolution-Based Code Construction from the Degree Distribution of Random LDPC Code Ensembles 28 3.3.3 Optimization of PD-GLDPC Codes Using Protograph Differential Evolution 32 3.4 Numerical Results and Analysis 36 3.4.1 Simulation Result for Optimized PD-GLDPC Code from Regular and Irregular Random LDPC Code Ensembles 36 3.4.2 Simulation Result for PD-GLDPC Code from Optimized Protograph 43 3.5 Proof of Theorem 1: The Constraint for the Existence of the Typical Minimum Distance of the Proposed Protograph-Based PD-GLDPC Codes 45 4 Design of Protograph-Based LDPC Code Using Resolvable Block Design for Block Fading Channel 52 4.1 Problem Formulation 53 4.1.1 BF Channel Model 53 4.1.2 Performance Metrics of BF Channel 54 4.1.3 Protograph-Based LDPC Codes and QC LDPC Codes 57 4.2 New Construction of Protograph-Based LDPC Codes from Resolvable Block Designs 57 4.2.1 Resolvable Block Designs 57 4.2.2 Construction of the Proposed Protograph-Based LDPC Codes 59 4.2.3 Theoretical Analysis of the Proposed Protograph-Based LDPC Code from RBD 61 4.2.4 Numerical Analysis of the Proposed Protograph-Based LDPC Code Codes for BF Channel 65 4.2.5 BER Comparison with Analytical Results from Gamma Evolution 65 4.2.6 FER Comparison with Channel Outage Probability 67 5 Conclusions 69 Abstract (In Korean) 78박