192 research outputs found
The Contributory Effect of Latency on the Quality of Voice Transmitted over the Internet
Deployment of Voice over Internet Protocol (VoIP) is rapidly growing worldwide due to the new services it provides and cost savings derived from using a converged IP network. However, voice quality is affected by bandwidth, delay, latency, jitter, packet loss e.t.c. Latency is the dominant factor that degrades quality of voice transfer. There is therefore strong need for a study on the effect of Latency with the view to improving Quality of Voice (QoV) in VoIP network. In this work, Poisson probability theorem, Markov Chain, Probability distribution theorems and Network performance metric were used to study the effect of latency on QoS in VoIP network. This is achieved by considering the effect of latency resulting from several components between two points in multiple networks. The NetQoS Latency Calculator, Net-Cracker Professional® for Modeling and Matlab/Simulink® for simulating network were tools used and the results obtained compare favourably well with theoretical facts
A Comparison of Airway Dimensions among Different Skeletal Craniofacial Patterns
Background and Objectives: Much attention has been given to the association of craniofacial skeletal morphology, upper airway dimension, and respiratory function with patients suffering from obstructive sleep apnea. However, much of the information gathered on the aforementioned has been established with the use of 2-Dimensional lateral cephalometry. The objective of this study was to investigate upper airway dimensions among different skeletal patterns using cone-beam computed tomography (CBCT). Methods: A sample of 279 patients who seught orthodontic treatment at the University of Nevada Las Vegas School of Dentistry Department of Orthodontics was included in this study. Pre-treatment multi-slice CBCT scans of these subjects were divided into three sagittal groups: Class I subjects with an ANB angle 0° to 5°, Class II subjects with an ANB angle \u3e 5°, and Class III subjects with an ANB angle \u3c 0°. The CBCT scans were also divided into three vertical groups: normodivergent subjects with a mandibular plane angle 22° to 30°, hyperdivergent subjects with a mandibular plane angle \u3e 30°, and hypodivergent subjects with a mandibular plane angle\u3c 22°. The sagittal and vertical groups were analyzed individually (6 groups) and together (9 groups) to determine if the various combination of skeletal patterns has any effects on airway volume, minimum cross sectional area (CSA), and airway shape. CBCT scans were analyzed using Dolphin Imaging 10.5 Premium and Anatomage In VivoDental(TM) software version 5.1. Data were analyzed using ANOV A, Tukey-Kramer, Student t test, and Wilcoxon/Kruskal-Wallis tests. Results: Significant differences were found among the sagittal groups for airway volume and minimum CSA, p \u3c .05. Class III subjects were found to have the largest airway volume and minimum CSA while Class II subjects were found to have the smallest airway volume and minimum CSA. Minimum CSA was found to have an increasing function of airway volume. CSA increased by 10.23 mm2 for every cc increase in airway volume. No significant differences were found among the vertical groups. However, Class II subjects with hyperdivergent skeletal pattern were found to have the smallest airway volume and minimum CSA. No associations were found between the airway shapes and airway volume when evaluating sagittal and/or vertical skeletal patterns. However, wide airway shapes were shown to have the largest airway volume while long airway shapes were shown to have the smallest airways. Conclusions: Airway dimensions can be affected by craniofacial skeletal pattern. Patients with Class II hyperdivergent skeletal pattern may be more prone to obstructive sleep apnea problems
Radiation Exposure of Patients by Cone Beam CT during Endobronchial Navigation - A Phantom Study
Rationale: Cone Beam Computed Tomography imaging has become increasingly important in many fields of interventional therapies. Objective: Lung navigation study which is an uncommon soft tissue approach. Methods: As no effective organ radiation dose levels were available for this kind of Cone Beam Computed Tomography application we simulated in our DynaCT (Siemens AG, Forchheim, Germany) suite 2 measurements including 3D acquisition and again for 3D acquisition and 4 endobronchial navigation maneuvers under fluoroscopy towards a nodule after the 8th segmentation in the right upper lobe over a total period of 20 minutes (min). These figures reflect the average complexity and time in our experience. We hereby describe the first time the exact protocol of lung navigation by a Cone Beam Computed Tomography approach. Measurement: The hereby first time measured body radiation doses in that approach showed very promising numbers between 0,98-1,15mSv giving specific lung radiation doses of 0,42-0,38 mSv. Main results: These figures are comparable or even better to other lung navigation systems. Cone Beam Computed Tomography offers some unique features for lung interventionists as a realtime 1-step navigation system in an open structure feasible for endobronchial and transcutaneous approach. Conclusions: Due to this low level of radiation exposure Cone Beam Computed Tomography is expected to attract interventionists interested in using and guiding endobronchial or transcutaneous ablative procedures to peripheral endobronchial and other lung lesions
Recommended from our members
Further Dosimetry Studies at Rhode Island Nuclear Science Center.
The RINSC is a 2 mega-watt, light water and graphite moderated and cooled reactor that has a graphite thermal column built as a user facility for sample irradiation. Over the past decade, after the reactor conversion from a highly-enriched uranium core to a low-enriched one, flux and dose measurements and calculations had been performed in the thermal column to update the ex-core parameters and to predict the effect from in-core fuel burn-up and rearrangement. The most recent data from measurements and calculations that have been made at the RINSC thermal column since October of 2005 are reported
Recommended from our members
A study of residual Cesium 137 contamination in southwestern Utah soil following the nuclear weapons tests at the Nevada Test Site in the 1950's and 1960's
The Nevada Test Site (NTS) was the location for at least 100 above ground
Nuclear Weapons tests during the 1950's and early 1960's. Radioactive fallout
from these tests spread to many areas north and west of the NTS. According to
estimates from the NCI and DOE, Washington County, Utah was one of the areas
which received some of the highest levels of radioactive contamination from
Nuclear Fallout. Cesium 137, a byproduct of Nuclear Fission was one of the
nuclides deposited during this fallout period. Cesium 137 has a half life of 30
years and relatively high photon energy so it is easily detected and theoretically
would still be present in the soil if it was originally deposited there. A study was
conducted using soil samples from the Washington County area to determine if
Cesium 137 still exists in the area in detectable amounts. 102 soil samples were
collected and analyzed. Only one of the 102 soil samples did not have detectable
amounts of Cesium contained within it. Several of the samples contained levels
substantially higher than earlier estimates would have predicted. This leads us to
conclude that doses to the public from the testing could also have been higher
than earlier thought. The area immediately around the community of Enterprise
Utah contained the highest contamination readings of the locations we researched.
Iron County, Northeast of St George, also had surprisingly high readings
considering that the studies we researched stated that Iron County's contamination
density was estimated to be lower than most of the areas in Washington County
Do We Truly Sacrifice Truth for Simplicity: Comparing Complete Individual Randomization and Semi-Randomized Approaches to Survey Administration
Human-computer interaction researchers have long used survey methodologies. However, debate remains about the potential for participants to provide biased responses to subsequent items based on previously viewed items. In this research, we investigate the effects of survey item ordering that researchers have not studied previously. Grounded in previous exploratory item-ordering studies using an HCI online survey, we investigate bias in more detail. In addition, we use an adult sample population so that we can extend our results more broadly as compared to previous research. We employed two distinct randomizing survey approaches: 1) complete item randomization for each respondent (random), which presents items to each respondent in a completely randomized order; and 2) partially individualized item randomization (grouped), which presents constructs in the same order in a survey but randomizes items in each construct for each respondent. Our results suggest researchers should use fully randomized survey instruments in HCI research whenever possible since grouped ordering of any kind increases bias and statistical inflation, which can influence results’ veracity. Additionally, we did not appear to find any significant increase in the participants’ frustration or fatigue to be associated with the random treatment
A Proposed Change to Astronaut Exposures Limits Is a Giant Leap Backwards for Radiation Protection
Addressing the uncertainties in assessing health risks from cosmic ray heavy ions is a major scientific challenge recognized by many previous reports by the National Academy of Sciences (NAS) and the National Council on Radiation Protection and Measurements (NCRP) advising the National Aeronautics and Space Administration (NASA). These reports suggested a series of steps to pursue the scientific basis for space radiation protection, including the implementation of age and sex dependent risk assessments and exposure limits appropriate for a small population of radiation workers, the evaluation of uncertainties in risk projections, and developing a vigorous research program in heavy ion radiobiology to reduce uncertainties and discover effective countermeasures. The assessment of uncertainties in assessing risk provides protection against changing assessments of risk, reveals limitations in information used in space mission operations, and provides the impetus to reduce uncertainties and discover the true level of risk and possible effectiveness of countermeasures through research. However, recommendations of a recent NAS report, in an effort to minimize differences in age and sex on flight opportunities, suggest a 600 mSv career effective dose limit based on a median estimate to reach 3% cancer fatality for 35-year old females. The NAS report does not call out examples where females would be excluded from space missions planned in the current decade using the current radiation limits at NASA. In addition, there are minimal considerations of the level of risk to be encountered at this exposure level with respect to the uncertainties of heavy ion radiobiology, and risks of cancer, as well as cognitive detriments and circulatory diseases. Furthermore, their recommendation to limit Sieverts and not risk in conjunction with a waiver process is essentially a recommendation to remove radiation limits for astronauts. We discuss issues with several of the NAS recommendations with the conclusion that the recommendations could have negative impacts on crew health and safety, and violate the three principles of radiation protection (to prevent clinically significant deterministic effects, limit stochastic effects, and practice ALARA), which would be a giant leap backwards for radiation protection
- …