Approximate and timing-speculative hardware design for high-performance and energy-efficient video processing

Since the end of transistor scaling in 2-D appeared on the horizon, innovative circuit design paradigms have been on the rise to go beyond the well-established and ultraconservative exact computing. Many compute-intensive applications – such as video processing – exhibit an intrinsic error resilience and do not necessarily require perfect accuracy in their numerical operations. Approximate computing (AxC) is emerging as a design alternative to improve the performance and energy-efficiency requirements for many applications by trading its intrinsic error tolerance with algorithm and circuit efficiency. Exact computing also imposes a worst-case timing to the conventional design of hardware accelerators to ensure reliability, leading to an efficiency loss. Conversely, the timing-speculative (TS) hardware design paradigm allows increasing the frequency or decreasing the voltage beyond the limits determined by static timing analysis (STA), thereby narrowing pessimistic safety margins that conventional design methods implement to prevent hardware timing errors. Timing errors should be evaluated by an accurate gate-level simulation, but a significant gap remains: How these timing errors propagate from the underlying hardware all the way up to the entire algorithm behavior, where they just may degrade the performance and quality of service of the application at stake? This thesis tackles this issue by developing and demonstrating a cross-layer framework capable of performing investigations of both AxC (i.e., from approximate arithmetic operators, approximate synthesis, gate-level pruning) and TS hardware design (i.e., from voltage over-scaling, frequency over-clocking, temperature rising, and device aging). The cross-layer framework can simulate both timing errors and logic errors at the gate-level by crossing them dynamically, linking the hardware result with the algorithm-level, and vice versa during the evolution of the application’s runtime. Existing frameworks perform investigations of AxC and TS techniques at circuit-level (i.e., at the output of the accelerator) agnostic to the ultimate impact at the application level (i.e., where the impact is truly manifested), leading to less optimization. Unlike state of the art, the framework proposed offers a holistic approach to assessing the tradeoff of AxC and TS techniques at the application-level. This framework maximizes energy efficiency and performance by identifying the maximum approximation levels at the application level to fulfill the required good enough quality. This thesis evaluates the framework with an 8-way SAD (Sum of Absolute Differences) hardware accelerator operating into an HEVC encoder as a case study. Application-level results showed that the SAD based on the approximate adders achieve savings of up to 45% of energy/operation with an increase of only 1.9% in BD-BR. On the other hand, VOS (Voltage Over-Scaling) applied to the SAD generates savings of up to 16.5% in energy/operation with around 6% of increase in BD-BR. The framework also reveals that the boost of about 6.96% (at 50°) to 17.41% (at 75° with 10- Y aging) in the maximum clock frequency achieved with TS hardware design is totally lost by the processing overhead from 8.06% to 46.96% when choosing an unreliable algorithm to the blocking match algorithm (BMA). We also show that the overhead can be avoided by adopting a reliable BMA. This thesis also shows approximate DTT (Discrete Tchebichef Transform) hardware proposals by exploring a transform matrix approximation, truncation and pruning. The results show that the approximate DTT hardware proposal increases the maximum frequency up to 64%, minimizes the circuit area in up to 43.6%, and saves up to 65.4% in power dissipation. The DTT proposal mapped for FPGA shows an increase of up to 58.9% on the maximum frequency and savings of about 28.7% and 32.2% on slices and dynamic power, respectively compared with stat

Low-complexity Multidimensional DCT Approximations

In this paper, we introduce low-complexity multidimensional discrete cosine transform (DCT) approximations. Three dimensional DCT (3D DCT) approximations are formalized in terms of high-order tensor theory. The formulation is extended to higher dimensions with arbitrary lengths. Several multiplierless $8\times 8\times 8$ approximate methods are proposed and the computational complexity is discussed for the general multidimensional case. The proposed methods complexity cost was assessed, presenting considerably lower arithmetic operations when compared with the exact 3D DCT. The proposed approximations were embedded into 3D DCT-based video coding scheme and a modified quantization step was introduced. The simulation results showed that the approximate 3D DCT coding methods offer almost identical output visual quality when compared with exact 3D DCT scheme. The proposed 3D approximations were also employed as a tool for visual tracking. The approximate 3D DCT-based proposed system performs similarly to the original exact 3D DCT-based method. In general, the suggested methods showed competitive performance at a considerably lower computational cost.Comment: 28 pages, 5 figures, 5 table

Design of Energy-Efficient Discrete Cosine Transform using Pruned Arithmetic Circuits

Inexact circuits and approximate computing have been gaining a lot of interest in order to improve performances and energy efficiency beyond the boundaries of conventional digital circuits. Image and video processing is one of the best candidate for applying such techniques. As one of the key building blocks, Discrete Cosine Transform (DCT) accelerators are investigated using pruned arithmetic circuits. A design methodology is presented in order to optimize both image quality and circuit performances. This work demonstrates that with such technique, savings are possible not only on arithmetic units, but in the entire accelerator hardware. Simulations show up to 12\% area and 10\% power savings with less than 20dB PSNR degradation compared to the conventional DCT design

Trading off Energy versus Accuracy in Modern Computing Systems:From Digital Circuit Design to Programming Techniques

The slowdown of Moore's law, which has been the driving force of the electronics industry over the last 5 decades, is causing serious problem to Integrated Circuits (ICs) improvements. Technology scaling is becoming more and more complex and fabrication costs are growing exponentially. Furthermore, the energy gains associated to technology scaling are slowing down. Meanwhile, the expected boom of Internet of Things (IoT) devices requires ultra-low power ICs to be able to operate for several years without any user intervention, and energy-efficient computing system on the server side to treat all the gathered data. Approximate computing has emerged as an alternative way to improve energy-efficiency of both, high-performance and low-power computing systems by tolerating small and occasional errors. This energy-accuracy tradeoff can be applied on a wide range of over-engineered applications, particularly those involving human senses such as video and image processing. This thesis first presents an approximate circuit design technique called Gate-Level Pruning, which consists in selectively removing logic gates from any conventional circuit in order to reduce energy consumption, critical path delay, and area occupied on silicon. A Computer Aided Design (CAD) tool has been developed and integrated in the standard digital flow and has been evaluated on several arithmetic circuits, achieving up to 78% energy-delay-area savings. It is then shown how this methodology can be applied on more complex systems made of multiple arithmetic blocks but also memory: the discrete Cosine Transform(DCT), which is a key building block for image and video processing applications. Then, the speculative adder technique is presented. It consists in cutting carry chains to significantly relax the circuit timing constraints', and therefore drastically reduce energy consumption, area and delay. It is shown that this technique leads to errors of different nature than those produced by gate-level pruning. It is therefore worth combining GLP and speculative adders to obtain even higher savings. This has been verified on IEEE-754 floating point units integrated in a 65nm process within a low-power multi-core processor. Silicon measurements show up to 27% power, 36% area and 53% power-area savings. The second part of this thesis introduces software techniques to achieve similar energy-accuracy tradeoffs on commercially available processors. By switching from double precision to single precision floating-point data type and by exploiting vectorization capabilities of modern processors, a factor 2 energy can be saved on a Newton method for solving nonlinear equations. To further investigate the origins of these savings, an energy model based on Energy Per Instructions (EPI) has been built. It turns out that less than 6% of the total energy is consumed by arithmetic operations and that savings are achieved mainly by reducing the amount of data transferred between registers, cache and main memory. One way to reduce those power-hungry data movements is to use application specific hardware accelerators. Unfortunately, a commercial processor cannot embark accelerators for all the possible applications. To that extent, hardware accelerators are implemented on a Field Programmable Gate Array (FPGA) interconnected with a general-purpose processor to further reduce the energy consumption