2,552 research outputs found
Low cost underwater robot sensor suite
One of the most expensive parts of underwater robotics is the sensors. This paper looks at modifying off the shelf components to create a sensor suite on a small budget. A big saving is made with sonar using a cheap commercial product to create a four sonar array. A depth sensor and acceleration navigation system are also developed.<br /
An Underwater SLAM System using Sonar, Visual, Inertial, and Depth Sensor
This paper presents a novel tightly-coupled keyframe-based Simultaneous
Localization and Mapping (SLAM) system with loop-closing and relocalization
capabilities targeted for the underwater domain. Our previous work, SVIn,
augmented the state-of-the-art visual-inertial state estimation package OKVIS
to accommodate acoustic data from sonar in a non-linear optimization-based
framework. This paper addresses drift and loss of localization -- one of the
main problems affecting other packages in underwater domain -- by providing the
following main contributions: a robust initialization method to refine scale
using depth measurements, a fast preprocessing step to enhance the image
quality, and a real-time loop-closing and relocalization method using bag of
words (BoW). An additional contribution is the addition of depth measurements
from a pressure sensor to the tightly-coupled optimization formulation.
Experimental results on datasets collected with a custom-made underwater sensor
suite and an autonomous underwater vehicle from challenging underwater
environments with poor visibility demonstrate performance never achieved before
in terms of accuracy and robustness
An Autonomous Surface Vehicle for Long Term Operations
Environmental monitoring of marine environments presents several challenges:
the harshness of the environment, the often remote location, and most
importantly, the vast area it covers. Manual operations are time consuming,
often dangerous, and labor intensive. Operations from oceanographic vessels are
costly and limited to open seas and generally deeper bodies of water. In
addition, with lake, river, and ocean shoreline being a finite resource,
waterfront property presents an ever increasing valued commodity, requiring
exploration and continued monitoring of remote waterways. In order to
efficiently explore and monitor currently known marine environments as well as
reach and explore remote areas of interest, we present a design of an
autonomous surface vehicle (ASV) with the power to cover large areas, the
payload capacity to carry sufficient power and sensor equipment, and enough
fuel to remain on task for extended periods. An analysis of the design and a
discussion on lessons learned during deployments is presented in this paper.Comment: In proceedings of MTS/IEEE OCEANS, 2018, Charlesto
Design of a low cost underwater robotic research platform
To perform under water robotic research requires specialized equipment. A few pieces of electronics atop a set of wheels is not going to cut it. An underwater research platform must be waterproof, reliable, robust, recoverable and easy to maintain. It must also be able to move in 3 dimensions. Finally it must be able to navigate and avoid obstacles. To purchase such a platform can be very expensive. However, for shallow water, a suitable platform can be built from mostly off the shelf items at little cost. This paper describes the design of one such underwater robot including various sensors and communications systems that allow for swarm robotics.<br /
Design of a prototype underwater research platform for swarm robotics
To perform under water robotic research requires specialized equipment. A few pieces of electronics atop a set of wheels are not going to cut it. An underwater research platform must be waterproof, reliable, robust, recoverable and easy to maintain. It must also be able to move in 3 dimensions. Also it must be able to navigate and avoid obstacles. Further if this platform is to be part of a swarm of like platforms then it must be cost effective and relatively small. To purchase such a platform can be very expensive. However, for shallow water, a suitable platform can be built from mostly off the shelf items at little cost. This article describes the design of one such underwater robot including various sensors and communications systems that allow for swarm robotics. Whilst the robotic platform performs well, to explore what many of them would do, that is more than are available, simulation is required. This article continues to study how best to simulate these robots for a swarm, or system of systems, approach
NASA SBIR abstracts of 1990 phase 1 projects
The research objectives of the 280 projects placed under contract in the National Aeronautics and Space Administration (NASA) 1990 Small Business Innovation Research (SBIR) Phase 1 program are described. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses in response to NASA's 1990 SBIR Phase 1 Program Solicitation. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 280, in order of its appearance in the body of the report. The document also includes Appendixes to provide additional information about the SBIR program and permit cross-reference in the 1990 Phase 1 projects by company name, location by state, principal investigator, NASA field center responsible for management of each project, and NASA contract number
Adaptive Path Planning for Depth Constrained Bathymetric Mapping with an Autonomous Surface Vessel
This paper describes the design, implementation and testing of a suite of
algorithms to enable depth constrained autonomous bathymetric (underwater
topography) mapping by an Autonomous Surface Vessel (ASV). Given a target depth
and a bounding polygon, the ASV will find and follow the intersection of the
bounding polygon and the depth contour as modeled online with a Gaussian
Process (GP). This intersection, once mapped, will then be used as a boundary
within which a path will be planned for coverage to build a map of the
Bathymetry. Methods for sequential updates to GP's are described allowing
online fitting, prediction and hyper-parameter optimisation on a small embedded
PC. New algorithms are introduced for the partitioning of convex polygons to
allow efficient path planning for coverage. These algorithms are tested both in
simulation and in the field with a small twin hull differential thrust vessel
built for the task.Comment: 21 pages, 9 Figures, 1 Table. Submitted to The Journal of Field
Robotic
- …