Wireless body sensor networks for health-monitoring applications

This is an author-created, un-copyedited version of an article accepted for publication in Physiological Measurement. The publisher is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01

Optical fibre sensors - applications and potential

Fibre optic sensors have progressed considerably during the past few years and are now establishing their potential as very real contenders in the environmental, structural monitoring and industrial sensing areas. This paper will explore some examples of these emerging applications and analyse the benefits which optical fibre technology offers within these measurement sectors. We shall then continue to explore emerging prospects which offer new opportunities for future research and exploitation

Solar Splash Senior Design Project

Indiana University Purdue University IndianapolisThe Solar Splash senior project is the first attempt at creating an entirely solar propelled watercraft. The initial project intent was to design and create a supplement meets the specifications and compete in the competition. With this in mind, a budget approach was taken in order to be able to fund the task at hand. As the project progressed toward the end of the low-level design phase it was evident that the competition would not occur. At the midpoint of the project, the goals and objectives had changed entirely. The new focus was targeted at proving the operation of the systems involved in the watercraft. Having been faced with a new series of objectives and an entirely new scope, the project began to appear doable. The primary focus of the project at this point entirely relied on simulation data and data analysis. The idea was not reinventing the wheel but rather verifying that the wheel rolled. Using the designed propulsion, solar and sensors systems, with the help of a combination of software programs, the idea of a budget solution can be seen. The software used tell the story of the boat that would have been created had the project continued down the original proposed path. As systems were tested and analyzed, they were also adjusted and improved upon. The analysis process consumed a lot of time but acted as a highlighter for all the flaws that the system suffered from. This document introduces the design concepts and schematics of the Solar Splash senior design project. Within are detailed drawings and diagrams for the electrical systems devised for the construction operation of the watercraft. This report is a means of displaying the layout of the final product and how all systems tie together. The report will contain detailed information on not only hardware aspects but also software and how those will bridge together. The report is meant to be in layman’s terms and should be easily interpreted at all levels. The bulk of the information found in the report will be found in the testing sections where analysis of a theoretical boat is done. The motor design, solar design, and fluid dynamic analysis of the boat hull and propeller can be found in their respective section. The innerworkings, testing processes and thoughts behind each decision can also be found in these sections. The document begins with a table of contents identifying each main and subcategory of information. The next page is the document identification, revision history, and lesser known definitions. Following that is the introduction and scope. Specification requirements for the ‘general requirements’, ‘electrical requirements’ and ‘mechanical requirements’ are found on the following page. A system flowchart can be found in the high-level Design along with the design decision matrices for each system. The design portion then begins starting with the System-wide design changes and decisions. The hardware and software designs and schematics follow and cover the proposed schematics and drawings for the system. Cost breakdowns for each individual system are also found in the low-level section. Testing methodologies, results and an explanation of the testing software can be found after the low-level design. A summation of all these testing results is found near the tail of the document. Conclusions, recommendations, and appendixes can be found as the last three sections, respectively.Electrical Engineering Technolog

Emerging Trends of Nanotechnology towards Picotechnology: Energy and Biomolecules

In nature, metal oxide particles display their existence at the level of picomolecules in solution state and bioactive states in the body. We present evidence of picomolar behavior of molecules different than nanomolar behavior of particles. These particles can be encapsulated in polymers and can be functionalized with protein, nucleotides, and drugs to develop as smart intracellular targeting pico-devices. The preparation technique and physiological conditions decide the size and functionality of these pico-carrier devices. Their usable success rate, feasibility and potentials are yet to be proven or we do not know. The major difference between nanodevices and pico-devices is their intermolecular and intramolecular thermodynamics in medium and their molecular conformational interaction with molecular assembly in cytoarchitecture of the neurofilament, actin-myosin, microtubule proteins. Pico-carrier devices can be presumed as potential spears without interacting with host signal transduction and immunoprotection. In conclusion, the ultrafine size of newer picotechnology products may be better suited and easier to functionalize for design of particle based picodrugs, picochemicals, and pico-targeting molecules

Bridges Structural Health Monitoring and Deterioration Detection Synthesis of Knowledge and Technology

INE/AUTC 10.0

Detailed state of the art review for the different on-line/in-line oil analysis techniques in context of wind turbine gearboxes

The main driver behind developing advanced condition monitoring (CM) systems for the wind energy industry is the delivery of improved asset management regarding the operation and maintenance of the gearbox and other wind turbine components and systems. Current gearbox CM systems mainly detect faults by identifying ferrous materials, water, and air within oil by changes in certain properties such as electrical fields. In order to detect oil degradation and identify particles, more advanced devices are required to allow a better maintenance regime to be established. Current technologies available specifically for this purpose include Fourier transform infrared (FTIR) spectroscopy and ferrography. There are also several technologies that have not yet been or have been recently applied to CM problems. After reviewing the current state of the art, it is recommended that a combination of sensors would be used that analyze different characteristics of the oil. The information individually would not be highly accurate but combined it is fully expected that greater accuracy can be obtained. The technologies that are suitable in terms of cost, size, accuracy, and development are online ferrography, selective fluorescence spectroscopy, scattering measurements, FTIR, photoacoustic spectroscopy, and solid state viscometers

NILM techniques for intelligent home energy management and ambient assisted living: a review

The ongoing deployment of smart meters and different commercial devices has made electricity disaggregation feasible in buildings and households, based on a single measure of the current and, sometimes, of the voltage. Energy disaggregation is intended to separate the total power consumption into specific appliance loads, which can be achieved by applying Non-Intrusive Load Monitoring (NILM) techniques with a minimum invasion of privacy. NILM techniques are becoming more and more widespread in recent years, as a consequence of the interest companies and consumers have in efficient energy consumption and management. This work presents a detailed review of NILM methods, focusing particularly on recent proposals and their applications, particularly in the areas of Home Energy Management Systems (HEMS) and Ambient Assisted Living (AAL), where the ability to determine the on/off status of certain devices can provide key information for making further decisions. As well as complementing previous reviews on the NILM field and providing a discussion of the applications of NILM in HEMS and AAL, this paper provides guidelines for future research in these topics.Agência financiadora: Programa Operacional Portugal 2020 and Programa Operacional Regional do Algarve 01/SAICT/2018/39578 Fundação para a Ciência e Tecnologia through IDMEC, under LAETA: SFRH/BSAB/142998/2018 SFRH/BSAB/142997/2018 UID/EMS/50022/2019 Junta de Comunidades de Castilla-La-Mancha, Spain: SBPLY/17/180501/000392 Spanish Ministry of Economy, Industry and Competitiveness (SOC-PLC project): TEC2015-64835-C3-2-R MINECO/FEDERinfo:eu-repo/semantics/publishedVersio

Camera-Based Distance Sensor

While working on a robotics project at the electrical contracting company for which we work, we discovered a gap in the electronic distance sensor market in terms of range, accuracy, precision, and cost. We designed and constructed a prototype for an electronic distance sensing component which utilizes a camera, laser, and image processor to measure distances. The laser is pointed at a surface and an image of the laser dot is captured. An image processing algorithm determines the pixel position of the dot in the image, and this position is compared to a lookup table of known values to determine the distance to the dot. In measuring our prototype’s performance, we found that it was capable of measuring distances up to 5 meters with greater than 90% accuracy. We also discuss some possible ways to improve the viability of the technology, including ways to improve the refresh rate as well as the reliability