Demonstration of Load Rating Capabilities through Physical Load Testing: Sioux County Bridge Case Study, RB32-013, 2013

The objective of this work, Pilot Project - Demonstration of Capabilities and Benefits of Bridge Load Rating through Physical Testing, was to demonstrate the capabilities for load testing and rating bridges in Iowa, study the economic benefit of performing such testing, and perform outreach to local, state, and national engineers on the topic of bridge load testing and rating. This report documents one of three bridges inspected, load tested, and load rated as part of the project, the Sioux County Bridge (FHWA #308730), including testing procedures and performance of the bridge under static loading along with the calculated load rating from the field-calibrated analytical model. Two parallel reports document the testing and load rating of the Ida County Bridge (FHWA #186070) and the Johnson County Bridge (FHWA #205750). A tech brief provides overall information about the project

Concept for sleeve induction motor with 1-msec mechanical time constant

Conductive sleeve induction motor having a 1-msec mechanical time constant is used with solid-state devices to control all-electric servo power systems. The servomotor rotor inertia is small compared to the maximum force rating of the servo motion, permitting high no-load acceleration

Hybrid power semiconductor

The voltage rating of a bipolar transistor may be greatly extended while at the same time reducing its switching time by operating it in conjunction with FETs in a hybrid circuit. One FET is used to drive the bipolar transistor while the other FET is connected in series with the transistor and an inductive load. Both FETs are turned on or off by a single drive signal of load power, the second FET upon ceasing conductions, rendering one power electrode of the bipolar transistor open. Means are provided to dissipate currents which flow after the bipolar transistor is rendered nonconducting

Pilot Project - Demonstration of Load Rating Capabilities through Physical Load Testing: Tech Transfer Summary, RB32-013, 2013

This project demonstrated the capabilities for load testing bridges in Iowa, developed and presented a webinar to local and state engineers, and produced a spreadsheet and benefit evaluation matrix that others can use to preliminarily assess where bridge testing may be economically feasible given truck traffic and detour lengths

Harmonic correction in power supplies feeding non-linear loads

This paper focuses on the design of an electronic circuit which can be used in conjunction with the power supplies used at the input of non-linear loads (computers, TV sets, etc.) in order to filter out the input current harmonics in such loads. The electronic circuit will fill the gaps of the distorted current waveform so that it becomes sinusoidal and also in phase with the mains supply. In this paper different configurations of the proposed electronic circuit are covered (depending on the location with respect to the non-linear load). An optimization algorithm is carried out in order to find the best location, minimum device rating for different type of loads. The proposed circuit monitors the input current, output voltage and power rating of the power supply. The circuit will then decide whether to filter the input current harmonics or the output voltage harmonics. The circuit will also optimize the best switching frequency for the required load so that the power supply operates at the maximum possible efficiency

The effects of self-report cognitive failures and cognitive load on antisaccade performance

Individuals reporting high levels of distractibility in everyday life show impaired performance in standard laboratory tasks measuring selective attention and inhibitory processes. Similarly, increasing cognitive load leads to more errors/distraction in a variety of cognitive tasks. How these two factors interact is currently unclear; highly distractible individuals may be affected more when their cognitive resources are taxed, or load may linearly affect performance for all individuals. We investigated the relationship between self-reported levels of cognitive failures (CF) in daily life and performance in the antisaccade task, a widely used tool examining attentional control. Levels of concurrent cognitive demand were manipulated using a secondary auditory discrimination task. We found that both levels of self-reported CF and task load increased antisaccade latencies while having no effect on prosaccade eye-movements. However individuals rating themselves as suffering few daily life distractions showed a comparable load cost to those who experience many. These findings suggest that the likelihood of distraction is governed by the addition of both internal susceptibility and the external current load placed on working memory

Cognitive Load of Rating Scales

Why does Netflix.com use star ratings, Digg.com use up/down votes and Face- book use a “like” but not a “dislike” button? In this paper, we extend existing research on rating scales with findings from an experiment we ran to measure the cognitive load users experience while rating. In this paper, we analyze the cognitive load and time required by different rating scales. Our analysis draws upon 14,000 movie and product ratings we collected from 348 users through an online survey. In the survey, we measured the speed and cognitive load users ex- perience under four scales: unary (‘like it’), binary (thumbs up / thumbs down), five-star, and a 100-point slider. We compare a variety of measures of cognitive load and rating speed, and draw conclusions for user interface designers based on our results. Our advice to designers is grounded in the responses from users regarding their opinions of scales, the existing research, and in the models we build of the data collected from the experiment

The Preservation of Cued Recall in the Acute Mentally Fatigued State: A Randomised Crossover Study.

The objective of this study is to investigate the impact of acute mental fatigue on the recall of clinical information in the non-sleep-deprived state. Acute mental fatigue in the non-sleep-deprived subject is rarely studied in the medical workforce. Patient handover has been highlighted as an area of high risk especially in fatigued subjects. This study evaluates the deterioration in recall of clinical information over 2 h with cognitively demanding work in non-sleep-deprived subjects.A randomised crossover study involving twenty medical students assessed free (presentation) and cued (MCQ) recall of clinical case histories at 0 and 2 h under low and high cognitive load using the N-Back task. Acute mental fatigue was assessed through the Visual Analogue Scale, Stanford Scale and NASA-TLX Mental Workload Rating Scale.Free recall is significantly impaired by increased cognitive load (p < 0.05) with subjects demonstrating perceived mental fatigue during the high cognitive load assessment. There was no significant difference in the amount of information retrieved by cued recall under high and low cognitive load conditions (p = 1).This study demonstrates the loss of clinical information over a short time period involving a mentally fatiguing, high cognitive load task. Free recall for the handover of clinical information is unreliable. Memory cues maintain recall of clinical information. This study provides evidence towards the requirement for standardisation of a structured patient handover. The use of memory cues (involving recognition memory and cued recall methodology) would be beneficial in a handover checklist to aid recall of clinical information and supports evidence for their adoption into clinical practice

A fast acting electrical servo for the actuation of full span, Fowler-type wing flaps in DLC applications: A detail design study

The philosophy and detail design of an electro-mechanical actuator for Fowler-type wing flaps which have a response time constant of 0.025 seconds are described. A conventional electrical servomotor with a power rating twice the maximum power delivered to the load is employed along with adaptive, gain-scheduled feedback and various logic circuits, including one to remove electrical excitation from the motor during extended periods when no motion of the flap is desired

Evaluation of domestic electrical demand and its effect on low voltage network performance

Electrical demand in a house depends on various factors mainly being the user’s behaviour and the rating of the appliances. Some researchers have used daily domestic electrical demand profile at half hour time resolution for the energy management. When data of half hour time interval is used for the analysis of on-site generation, it can lead to over/under -estimates of the proportion of generated energy used on site. As a consequence, this could lead to over/under-estimating in the import and export of power from and to the power grid. In this paper, domestic electricity use profile recorded at high time resolution of one minute is used to analyse the profile obtained at different time resolution and its effect on on-site generation. Daily load profile for summer and winter at time resolution of 30 minute is generated from a data set of 22 houses consisting data of a whole year which is then compared with the daily load curve obtained after diversity maximum demand from the literature. The generated daily load profile is then used to see effect on the low voltage network. For the analysis on the low voltage network, a typical UK low voltage network is developed in the Matlab/Simulink softwar