2,805 research outputs found
RTXP : A Localized Real-Time Mac-Routing Protocol for Wireless Sensor Networks
Protocols developed during the last years for Wireless Sensor Networks (WSNs)
are mainly focused on energy efficiency and autonomous mechanisms (e.g.
self-organization, self-configuration, etc). Nevertheless, with new WSN
applications, appear new QoS requirements such as time constraints. Real-time
applications require the packets to be delivered before a known time bound
which depends on the application requirements. We particularly focus on
applications which consist in alarms sent to the sink node. We propose
Real-Time X-layer Protocol (RTXP), a real-time communication protocol. To the
best of our knowledge, RTXP is the first MAC and routing real-time
communication protocol that is not centralized, but instead relies only on
local information. The solution is cross-layer (X-layer) because it allows to
control the delays due to MAC and Routing layers interactions. RTXP uses a
suited hop-count-based Virtual Coordinate System which allows deterministic
medium access and forwarder selection. In this paper we describe the protocol
mechanisms. We give theoretical bound on the end-to-end delay and the capacity
of the protocol. Intensive simulation results confirm the theoretical
predictions and allow to compare with a real-time centralized solution. RTXP is
also simulated under harsh radio channel, in this case the radio link
introduces probabilistic behavior. Nevertheless, we show that RTXP it performs
better than a non-deterministic solution. It thus advocates for the usefulness
of designing real-time (deterministic) protocols even for highly unreliable
networks such as WSNs
A Study of Medium Access Control Protocols for Wireless Body Area Networks
The seamless integration of low-power, miniaturised, invasive/non-invasive
lightweight sensor nodes have contributed to the development of a proactive and
unobtrusive Wireless Body Area Network (WBAN). A WBAN provides long-term health
monitoring of a patient without any constraint on his/her normal dailylife
activities. This monitoring requires low-power operation of
invasive/non-invasive sensor nodes. In other words, a power-efficient Medium
Access Control (MAC) protocol is required to satisfy the stringent WBAN
requirements including low-power consumption. In this paper, we first outline
the WBAN requirements that are important for the design of a low-power MAC
protocol. Then we study low-power MAC protocols proposed/investigated for WBAN
with emphasis on their strengths and weaknesses. We also review different
power-efficient mechanisms for WBAN. In addition, useful suggestions are given
to help the MAC designers to develop a low-power MAC protocol that will satisfy
the stringent WBAN requirements.Comment: 13 pages, 8 figures, 7 table
DTLS Performance in Duty-Cycled Networks
The Datagram Transport Layer Security (DTLS) protocol is the IETF standard
for securing the Internet of Things. The Constrained Application Protocol,
ZigBee IP, and Lightweight Machine-to-Machine (LWM2M) mandate its use for
securing application traffic. There has been much debate in both the
standardization and research communities on the applicability of DTLS to
constrained environments. The main concerns are the communication overhead and
latency of the DTLS handshake, and the memory footprint of a DTLS
implementation. This paper provides a thorough performance evaluation of DTLS
in different duty-cycled networks through real-world experimentation, emulation
and analysis. In particular, we measure the duration of the DTLS handshake when
using three duty cycling link-layer protocols: preamble-sampling, the IEEE
802.15.4 beacon-enabled mode and the IEEE 802.15.4e Time Slotted Channel
Hopping mode. The reported results demonstrate surprisingly poor performance of
DTLS in radio duty-cycled networks. Because a DTLS client and a server exchange
more than 10 signaling packets, the DTLS handshake takes between a handful of
seconds and several tens of seconds, with similar results for different duty
cycling protocols. Moreover, because of their limited memory, typical
constrained nodes can only maintain 3-5 simultaneous DTLS sessions, which
highlights the need for using DTLS parsimoniously.Comment: International Symposium on Personal, Indoor and Mobile Radio
Communications (PIMRC - 2015), IEEE, IEEE, 2015,
http://pimrc2015.eee.hku.hk/index.htm
Energy-efficient wireless communication
In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters
Selective Jamming of LoRaWAN using Commodity Hardware
Long range, low power networks are rapidly gaining acceptance in the Internet
of Things (IoT) due to their ability to economically support long-range sensing
and control applications while providing multi-year battery life. LoRa is a key
example of this new class of network and is being deployed at large scale in
several countries worldwide. As these networks move out of the lab and into the
real world, they expose a large cyber-physical attack surface. Securing these
networks is therefore both critical and urgent. This paper highlights security
issues in LoRa and LoRaWAN that arise due to the choice of a robust but slow
modulation type in the protocol. We exploit these issues to develop a suite of
practical attacks based around selective jamming. These attacks are conducted
and evaluated using commodity hardware. The paper concludes by suggesting a
range of countermeasures that can be used to mitigate the attacks.Comment: Mobiquitous 2017, November 7-10, 2017, Melbourne, VIC, Australi
- …