Personnel recognition and gait classification based on multistatic micro-doppler signatures using deep convolutional neural networks

In this letter, we propose two methods for personnel recognition and gait classification using deep convolutional neural networks (DCNNs) based on multistatic radar micro-Doppler signatures. Previous DCNN-based schemes have mainly focused on monostatic scenarios, whereas directional diversity offered by multistatic radar is exploited in this letter to improve classification accuracy. We first propose the voted monostatic DCNN (VMo-DCNN) method, which trains DCNNs on each receiver node separately and fuses the results by binary voting. By merging the fusion step into the network architecture, we further propose the multistatic DCNN (Mul-DCNN) method, which performs slightly better than VMo-DCNN. These methods are validated on real data measured with a 2.4-GHz multistatic radar system. Experimental results show that the Mul-DCNN achieves over 99% accuracy in armed/unarmed gait classification using only 20% training data and similar performance in two-class personnel recognition using 50% training data, which are higher than the accuracy obtained by performing DCNN on a single radar node

Improvement of detection and tracking techniques in multistatic passive radar systems. (Mejora de técnicas de detección y seguimiento en sistemas radar pasivos multiestáticos)

Esta tesis doctoral es el resultado de una intensa actividad investigadora centrada en los sensores radar pasivos para la mejora de las capacidades de detección y seguimiento en escenarios complejos con blancos terrestres y pequeños drones. El trabajo de investigación se ha llevado a cabo en el grupo de investigación coordinado por la Dra. María Pilar Jarabo Amores, dentro del marco diferentes proyectos: IDEPAR (“Improved DEtection techniques for PAssive Radars”), MASTERSAT (“MultichAnnel paSsive radar receiver exploiting TERrestrial and SATellite Illuminators”) y KRIPTON (“A Knowledge based appRoach to passIve radar detection using wideband sPace adapTive prOcessiNg”) financiados por el Ministerio de Economía y Competitividad de España; MAPIS (Multichannel passive ISAR imaging for military applications) y JAMPAR (“JAMmer-based PAssive Radar”), financiados por la Agencia Europea de Defensa (EDA) . El objetivo principal es la mejora de las técnicas de detección y seguimiento en radares pasivos con configuraciones biestáticas y multiestaticas. En el documento se desarrollan algoritmos para el aprovechamiento de señales procedentes de distintos iluminadores de oportunidad (transmisores DVB-T, satélites DVB-S y señales GPS). Las soluciones propuestas han sido integradas en el demostrador tecnológico IDEPAR, desarrollado y actualizado bajo los proyectos mencionados, y validadas en escenarios reales declarados de interés por potenciales usuarios finales (Direccion general de armamento y material, instituto nacional de tecnología aeroespacial y la armada española). Para el desarrollo y evaluación de cadenas de las cadenas de procesado, se plantean dos casos de estudio: blancos terrestres en escenarios semiurbanos edificios y pequeños blancos aéreos en escenarios rurales y costeros. Las principales contribuciones se pueden resumir en los siguientes puntos: • Diseño de técnicas de seguimiento 2D en el espacio de trabajo rango biestático-frecuencia Doppler: se desarrollan técnicas de seguimiento para los dos casos de estudio, localización de blancos terrestres y pequeños drones. Para es último se implementan técnicas capaces de seguir tanto el movimiento del dron como su firma Doppler, lo que permite implementar técnicas de clasificación de blancos. • Diseño de técnicas de seguimiento de blancos capaces de integrar información en el espacio 3D (rango, Doppler y acimut): se diseñan técnicas basadas en procesado en dos etapas, una primera con seguimiento en 2D para el filtrado de falsas alarmas y la segunda para el seguimiento en 3D y la conversión de coordenadas a un plano local cartesiano. Se comparan soluciones basadas en filtros de Kalman para sistemas tanto lineales como no lineales. • Diseño de cadenas de procesado para sistemas multiestáticos: la información estimada del blanco sobre múltiples geometrías biestáticas es utilizada para incremento de las capacidades de localización del blanco en el plano cartesiano local. Se presentan soluciones basadas en filtros de Kalman para sistemas no lineales explotando diferentes medidas biestáticas en el proceso de transformación de coordenadas, analizando las mejoras de precisión en la localización del blanco. • Diseño de etapas de procesado para radares pasivos basados en señales satelitales de las constelaciones GPS DVB-S. Se estudian las características de las señales satelitales identificando sus inconvenientes y proponiendo cadenas de procesado que permitan su utilización para la detección y seguimiento de blancos terrestres. • Estudio del uso de señales DVB-T multicanal con gaps de transmisión entre los diferentes canales en sistemas radares pasivos. Con ello se incrementa la resolución del sistema, y las capacidades de detección, seguimiento y localización. Se estudia el modelo de señal multicanal, sus efectos sobre el procesado coherente y se proponen cadenas de procesado para paliar los efectos adversos de este tipo de señales

Multistatic and Networked Radar: Principles and Practice

Professor Viktor Chernyak was a visionary whose book Fundamentals of Multisite Radar Systems, published in 1993, set out the principles of multistatic and multiradar systems. This paper summarises Chernyak's contribution, provides some historical background to the development of networked radar, and discusses the technical issues that will be necessary for practical networked radars to be feasible in the future

Feature diversity for optimized human micro-doppler classification using multistatic radar

This paper investigates the selection of different combinations of features at different multistatic radar nodes, depending on scenario parameters, such as aspect angle to the target and signal-to-noise ratio, and radar parameters, such as dwell time, polarisation, and frequency band. Two sets of experimental data collected with the multistatic radar system NetRAD are analysed for two separate problems, namely the classification of unarmed vs potentially armed multiple personnel, and the personnel recognition of individuals based on walking gait. The results show that the overall classification accuracy can be significantly improved by taking into account feature diversity at each radar node depending on the environmental parameters and target behaviour, in comparison with the conventional approach of selecting the same features for all nodes

Review of radar classification and RCS characterisation techniques for small UAVs or drones

This review explores radar-based techniques currently utilised in the literature to monitor small unmanned aerial vehicle (UAV) or drones; several challenges have arisen due to their rapid emergence and commercialisation within the mass market. The potential security threats posed by these systems are collectively presented and the legal issues surrounding their successful integration are briefly outlined. Key difficulties involved in the identification and hence tracking of these `radar elusive' systems are discussed, along with how research efforts relating to drone detection, classification and radar cross section (RCS) characterisation are being directed in order to address this emerging challenge. Such methods are thoroughly analysed and critiqued; finally, an overall picture of the field in its current state is painted, alongside scope for future work over a broad spectrum

Development and Evaluation of a Multistatic Ultrawideband Random Noise Radar

This research studies the AFIT noise network (NoNET) radar node design and the feasibility in processing the bistatic channel information of a cluster of widely distributed noise radar nodes. A system characterization is used to predict theoretical localization performance metrics. Design and integration of a distributed and central signal and data processing architecture enables the Matlab®-driven signal data acquisition, digital processing and multi-sensor image fusion. Experimental evaluation of the monostatic localization performance reveals its range measurement error standard deviation is 4.8 cm with a range resolution of 87.2(±5.9) cm. The 16-channel multistatic solution results in a 2-dimensional localization error of 7.7(±3.1) cm and a comparative analysis is performed against the netted monostatic solution. Results show that active sensing with a low probability of intercept (LPI) multistatic radar, like the NoNET, is capable of producing sub-meter accuracy and near meter-resolution imagery

Development and performance evaluation of a multistatic radar system

Multistatic radar systems are of emerging interest as they can exploit spatial diversity, enabling improved performance and new applications. Their development is being fuelled by advances in enabling technologies in such fields as communications and Digital Signal Processing (DSP). Such systems differ from typical modern active radar systems through consisting of multiple spatially diverse transmitter and receiver sites. Due to this spatial diversity, these systems present challenges in managing their operation as well as in usefully combining the multiple sources of information to give an output to the radar operator. In this work, a novel digital Commercial Off-The-Shelf (COTS) based coherent multistatic radar system designed at University College London, named ‘NetRad’, has been developed to produce some of the first published experimental results, investigating the challenges of operating such a system, and determining what level of performance might be achievable. Full detail of the various stages involved in the combination of data from the component transmitter-receiver pairs within a multistatic system is investigated, and many of the practical issues inherent are discussed. Simulation and subsequent experimental verification of several centralised and decentralised detection algorithms in terms of localisation (resolution and parameter estimation) of targets was undertaken. The computational cost of the DSP involved in multistatic data fusion is also considered. This gave a clear demonstration of several of the benefits of multistatic radar. Resolution of multiple targets that would have been unresolvable in a conventional monostatic system was shown. Targets were also shown to be plotted as two-dimensional vector position and velocities from use of time delay and Doppler shift information only. A range of targets were used including some such as walking people which were particularly challenging due to the variability of Radar Cross Section (RCS). Performance improvements were found to be dependant on the type of multistatic radar, method of data fusion and target characteristics in question. It is likely that future work will look to further explore the optimisation of multistatic radar for the various measures of performance identified and discussed in this work

Target Coordinates Estimation by Passive Radar with a Single non-Cooperative Transmitter and a Single Receiver

Passive radar is a bistatic radar that detects and tracks targets by processing reflections from non-cooperative transmitters. Due to the bistatic geometry for this radar, a target can be localized in Cartesian coordinates by using one of the following bistatic geometries: multiple non-cooperative transmitters and a single receiver, or a single non-cooperative transmitter and multiple receivers, whereas the diversity of receivers or non-cooperative transmitters leads to extra signal processing and a ghost target phenomenon. To mitigate these two disadvantages, we present a new method to estimate Cartesian coordinates of a target by a passive radar system with a single non-cooperative transmitter and a single receiver. This method depends on the ability of the radar receiver to analyze a signal-to-noise ratio (SNR) and estimate two arrival angles for the target’s echo signal. The proposed passive radar system is simulated with a Digital Video Broadcasting-Terrestrial (DVB-T) transmitter, and the simulation results show the efficiency of this system compared with results of other researches