Flexible Stereo: Constrained, Non-rigid, Wide-baseline Stereo Vision for Fixed-wing Aerial Platforms

This paper proposes a computationally efficient method to estimate the time-varying relative pose between two visual-inertial sensor rigs mounted on the flexible wings of a fixed-wing unmanned aerial vehicle (UAV). The estimated relative poses are used to generate highly accurate depth maps in real-time and can be employed for obstacle avoidance in low-altitude flights or landing maneuvers. The approach is structured as follows: Initially, a wing model is identified by fitting a probability density function to measured deviations from the nominal relative baseline transformation. At run-time, the prior knowledge about the wing model is fused in an Extended Kalman filter~(EKF) together with relative pose measurements obtained from solving a relative perspective N-point problem (PNP), and the linear accelerations and angular velocities measured by the two inertial measurement units (IMU) which are rigidly attached to the cameras. Results obtained from extensive synthetic experiments demonstrate that our proposed framework is able to estimate highly accurate baseline transformations and depth maps.Comment: Accepted for publication in IEEE International Conference on Robotics and Automation (ICRA), 2018, Brisban

Wing and body motion during flight initiation in Drosophila revealed by automated visual tracking

The fruit fly Drosophila melanogaster is a widely used model organism in studies of genetics, developmental biology and biomechanics. One limitation for exploiting Drosophila as a model system for behavioral neurobiology is that measuring body kinematics during behavior is labor intensive and subjective. In order to quantify flight kinematics during different types of maneuvers, we have developed a visual tracking system that estimates the posture of the fly from multiple calibrated cameras. An accurate geometric fly model is designed using unit quaternions to capture complex body and wing rotations, which are automatically fitted to the images in each time frame. Our approach works across a range of flight behaviors, while also being robust to common environmental clutter. The tracking system is used in this paper to compare wing and body motion during both voluntary and escape take-offs. Using our automated algorithms, we are able to measure stroke amplitude, geometric angle of attack and other parameters important to a mechanistic understanding of flapping flight. When compared with manual tracking methods, the algorithm estimates body position within 4.4±1.3% of the body length, while body orientation is measured within 6.5±1.9 deg. (roll), 3.2±1.3 deg. (pitch) and 3.4±1.6 deg. (yaw) on average across six videos. Similarly, stroke amplitude and deviation are estimated within 3.3 deg. and 2.1 deg., while angle of attack is typically measured within 8.8 deg. comparing against a human digitizer. Using our automated tracker, we analyzed a total of eight voluntary and two escape take-offs. These sequences show that Drosophila melanogaster do not utilize clap and fling during take-off and are able to modify their wing kinematics from one wingstroke to the next. Our approach should enable biomechanists and ethologists to process much larger datasets than possible at present and, therefore, accelerate insight into the mechanisms of free-flight maneuvers of flying insects

Nonlinear Attitude Filtering: A Comparison Study

This paper contains a concise comparison of a number of nonlinear attitude filtering methods that have attracted attention in the robotics and aviation literature. With the help of previously published surveys and comparison studies, the vast literature on the subject is narrowed down to a small pool of competitive attitude filters. Amongst these filters is a second-order optimal minimum-energy filter recently proposed by the authors. Easily comparable discretized unit quaternion implementations of the selected filters are provided. We conduct a simulation study and compare the transient behaviour and asymptotic convergence of these filters in two scenarios with different initialization and measurement errors inspired by applications in unmanned aerial robotics and space flight. The second-order optimal minimum-energy filter is shown to have the best performance of all filters, including the industry standard multiplicative extended Kalman filter (MEKF)