Efficiency Impairment of Wireless Sensor Networks Protocols under Realistic Physical Layer Conditions

International audienceMost of existing works about sensor networks focus on energy management. Already proposed solutions often consist in balancing energy consumption by taking advantage of the redundancy induced by the random deployment of nodes; some nodes are active while others are in sleep mode, thus consuming less energy. Such a dynamical topology should not impact the monitoring activity. Area coverage protocols aim at turning off redundant sensor nodes in order to constitute a set of active nodes that covers as large an area as the whole set of nodes. In this paper, we focus on localized algorithms that require 1-hop knowledge only to allow nodes to choose their activity status. The unit disk model is the most commonly used assumption; if a node emits a message, any node within its communication range receives it while any node outside the disk does not. In this article, the impact of a realistic radio channel on area coverage protocols for wireless sensor networks is studied. It is shown that a non-binary reception probability can lead to very different results for protocols that could though provide great performances with the unit disk model. An optimization of a protocol to keep increasing the network lifetime once a realistic energy consumption model is considered is also provided

Energy-Optimal Scheduling in Low Duty Cycle Sensor Networks

Energy consumption of a wireless sensor node mainly depends on the amount of time the node spends in each of the high power active (e.g., transmit, receive) and low power sleep modes. It has been well established that in order to prolong node's lifetime the duty-cycle of the node should be low. However, low power sleep modes usually have low current draw but high energy cost while switching to the active mode with a higher current draw. In this work, we investigate a MaxWeightlike opportunistic sleep-active scheduling algorithm that takes into account time- varying channel and traffic conditions. We show that our algorithm is energy optimal in the sense that the proposed ESS algorithm can achieve an energy consumption which is arbitrarily close to the global minimum solution. Simulation studies are provided to confirm the theoretical results

Coverage Protocols for Wireless Sensor Networks: Review and Future Directions

The coverage problem in wireless sensor networks (WSNs) can be generally defined as a measure of how effectively a network field is monitored by its sensor nodes. This problem has attracted a lot of interest over the years and as a result, many coverage protocols were proposed. In this survey, we first propose a taxonomy for classifying coverage protocols in WSNs. Then, we classify the coverage protocols into three categories (i.e. coverage aware deployment protocols, sleep scheduling protocols for flat networks, and cluster-based sleep scheduling protocols) based on the network stage where the coverage is optimized. For each category, relevant protocols are thoroughly reviewed and classified based on the adopted coverage techniques. Finally, we discuss open issues (and recommend future directions to resolve them) associated with the design of realistic coverage protocols. Issues such as realistic sensing models, realistic energy consumption models, realistic connectivity models and sensor localization are covered

Markov Decision Processes with Applications in Wireless Sensor Networks: A Survey

Wireless sensor networks (WSNs) consist of autonomous and resource-limited devices. The devices cooperate to monitor one or more physical phenomena within an area of interest. WSNs operate as stochastic systems because of randomness in the monitored environments. For long service time and low maintenance cost, WSNs require adaptive and robust methods to address data exchange, topology formulation, resource and power optimization, sensing coverage and object detection, and security challenges. In these problems, sensor nodes are to make optimized decisions from a set of accessible strategies to achieve design goals. This survey reviews numerous applications of the Markov decision process (MDP) framework, a powerful decision-making tool to develop adaptive algorithms and protocols for WSNs. Furthermore, various solution methods are discussed and compared to serve as a guide for using MDPs in WSNs

A Cross-Layer Approach for Minimizing Interference and Latency of Medium Access in Wireless Sensor Networks

In low power wireless sensor networks, MAC protocols usually employ periodic sleep/wake schedule to reduce idle listening time. Even though this mechanism is simple and efficient, it results in high end-to-end latency and low throughput. On the other hand, the previously proposed CSMA/CA-based MAC protocols have tried to reduce inter-node interference at the cost of increased latency and lower network capacity. In this paper we propose IAMAC, a CSMA/CA sleep/wake MAC protocol that minimizes inter-node interference, while also reduces per-hop delay through cross-layer interactions with the network layer. Furthermore, we show that IAMAC can be integrated into the SP architecture to perform its inter-layer interactions. Through simulation, we have extensively evaluated the performance of IAMAC in terms of different performance metrics. Simulation results confirm that IAMAC reduces energy consumption per node and leads to higher network lifetime compared to S-MAC and Adaptive S-MAC, while it also provides lower latency than S-MAC. Throughout our evaluations we have considered IAMAC in conjunction with two error recovery methods, i.e., ARQ and Seda. It is shown that using Seda as the error recovery mechanism of IAMAC results in higher throughput and lifetime compared to ARQ.Comment: 17 pages, 16 figure

An Energy Driven Architecture for Wireless Sensor Networks

Most wireless sensor networks operate with very limited energy sources-their batteries, and hence their usefulness in real life applications is severely constrained. The challenging issues are how to optimize the use of their energy or to harvest their own energy in order to lengthen their lives for wider classes of application. Tackling these important issues requires a robust architecture that takes into account the energy consumption level of functional constituents and their interdependency. Without such architecture, it would be difficult to formulate and optimize the overall energy consumption of a wireless sensor network. Unlike most current researches that focus on a single energy constituent of WSNs independent from and regardless of other constituents, this paper presents an Energy Driven Architecture (EDA) as a new architecture and indicates a novel approach for minimising the total energy consumption of a WS

Energy efficient random sleep-awake schedule design

This letter presents a simple model for determining energy efficient random sleep-awake schedules. Random sleepawake schedules are more appropriate for sensor networks, where the time of occurrence of an event being monitored, e.g., the detection of an intruder, is unknown a priori, and the coordination among nodes is costly. We model the random sleepawake schedule as a two state Markov process, and maximize the probability of the transmission of sensed data by a given deadline. Our results indicate that for a given duty cycle, the optimal policy is to have infrequent transitions between sleep and awake modes, if the average number of packets sent is greater than the mean number of slots the node is awake