Deep Learning Based on Orthogonal Approximate Message Passing for CP-Free OFDM

Channel estimation and signal detection are very challenging for an orthogonal frequency division multiplexing (OFDM) system without cyclic prefix (CP). In this article, deep learning based on orthogonal approximate message passing (DL-OAMP) is used to address these problems. The DL-OAMP receiver includes a channel estimation neural network (CE-Net) and a signal detection neural network based on OAMP, called OAMP-Net. The CE-Net is initialized by the least square channel estimation algorithm and refined by minimum mean-squared error (MMSE) neural network. The OAMP-Net is established by unfolding the iterative OAMP algorithm and adding some trainable parameters to improve the detection performance. The DL-OAMP receiver is with low complexity and can estimate time-varying channels with only a single training. Simulation results demonstrate that the bit-error rate (BER) of the proposed scheme is lower than those of competitive algorithms for high-order modulation.Comment: 5 pages, 4 figures, updated manuscript, International Conference on Acoustics, Speech and Signal Processing (ICASSP 2019). arXiv admin note: substantial text overlap with arXiv:1903.0476

Efficient frequency-domain channel equalisation methods for OFDM visible light communications

The authors present efficient frequency-domain channel estimation methods based on the intra-symbol frequency-domain averaging (ISFA), minimum mean squared error (MMSE) and weighted inter-frame averaging (WIFA) schemes for the orthogonal frequency division multiplexing (OFDM) visible light communications (VLC) system. OFDM-VLC with quadrature phase shift keying, 16- and 64-quadrature amplitude modulation mapping is experimentally demonstrated. Compared with the conventional least square channel estimation method, ISFA, MMSE and WIFA offer improved performance with MMSE offering the best performance in terms of the error vector magnitude but at the cost of high complexity. The authors show that the WIFA can improve the estimation accuracy of time-varying VLC optical channel

Performance Analysis of Compressive Sensing based LS and MMSE Channel Estimation Algorithm

In this paper, we have developed and implemented Minimum Mean Square Channel Estimation with Compressive Sensing (MMSE-CS) algorithm in MIMO-OFDM systems. The performance of this algorithm is analyzed by comparing it with Least Square channel estimation with compressive sensing (LS-CS), Least Square (LS) and Minimum Mean Square Estimation (MMSE) algorithms. It is observed that the performance of MMSE-CS in terms of Bit Error Rate (BER) metric is definitely better than LS-CS and LS algorithms and it is at par with MMSE algorithm. Moreover the role of compressive sensing theory in channel estimation is accentuated by the fact that in MMSE-CS algorithm only a very small number of channel coefficients are sensed to recreate the transmitted data faithfully as compared to MMSE algorithm

Peak-to-average power ratio reduction for DCO-OFDM underwater optical wireless communication system based on an interleaving technique

In underwater direct current-biased optical orthogonal frequency-division multiplexing (DCO-OFDM) system, high peak-to-average power ratio (PAPR) brings in-band distortion and out-of-band power. It also decreases the signal-to-quantization noise ratio of the analog-to-digital converter and the digital-to-analog converter. A time–frequency-domain interleaved subbanding scheme is proposed to reduce the PAPR of underwater DCO-OFDM system with low computation complexity and bit error rate (BER). The system BER is evaluated by the distances of the underwater optical wireless communication (UOWC), as well as by the signal attenuation of the UOWC channel. A least-square channel estimation method is adopted for adaptive power amplification at the receiver side, to further decrease the system BER

Distributed multi-user MIMO transmission using real-time sigma-delta-over-fiber for next generation fronthaul interface

To achieve the massive device connectivity and high data rate demanded by 5G, wireless transmission with wider signal bandwidths and higher-order multiple-input multiple-output (MIMO) is inevitable. This work demonstrates a possible function split option for the next generation fronthaul interface (NGFI). The proof-of-concept downlink architecture consists of real-time sigma-delta modulated signal over fiber (SDoF) links in combination with distributed multi-user (MU) MIMO transmission. The setup is fully implemented using off-the-shelf and in-house developed components. A single SDoF link achieves an error vector magnitude (EVM) of 3.14% for a 163.84 MHz-bandwidth 256-QAM OFDM signal (958.64 Mbps) with a carrier frequency around 3.5 GHz transmitted over 100 m OM4 multi-mode fiber at 850 nm using a commercial QSFP module. The centralized architecture of the proposed setup introduces no frequency asynchronism among remote radio units. For most cases, the 2 x 2 MU-MIMO transmission has little performance degradation compared to SISO, 0.8 dB EVM degradation for 40.96 MHz-bandwidth signals and 1.4 dB for 163.84 MHz-bandwidth on average, implying that the wireless spectral efficiency almost doubles by exploiting spatial multiplexing. A 1.4 Gbps data rate (720 Mbps per user, 163.84 MHz-bandwidth, 64-QAM) is reached with an average EVM of 6.66%. The performance shows that this approach is feasible for the high-capacity hot-spot scenario

Efficient space-frequency block coded pilot-aided channel estimation method for multiple-input-multiple-output orthogonal frequency division multiplexing systems over mobile frequency-selective fading channels

© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.An iterative pilot-aided channel estimation technique for space-frequency block coded (SFBC) multiple-input multiple-output orthogonal frequency division multiplexing systems is proposed. Traditionally, when channel estimation techniques are utilised, the SFBC information signals are decoded one block at a time. In the proposed algorithm, multiple blocks of SFBC information signals are decoded simultaneously. The proposed channel estimation method can thus significantly reduce the amount of time required to decode information signals compared to similar channel estimation methods proposed in the literature. The proposed method is based on the maximum likelihood approach that offers linearity and simplicity of implementation. An expression for the pairwise error probability (PEP) is derived based on the estimated channel. The derived PEP is then used to determine the optimal power allocation for the pilot sequence. The performance of the proposed algorithm is demonstrated in high frequency selective channels, for different number of pilot symbols, using different modulation schemes. The algorithm is also tested under different levels of Doppler shift and for different number of transmit and receive antennas. The results show that the proposed scheme minimises the error margin between slow and high speed receivers compared to similar channel estimation methods in the literature.Peer reviewe