Photometric LiDAR and RGB-D Bundle Adjustment

The joint optimization of the sensor trajectory and 3D map is a crucial characteristic of Simultaneous Localization and Mapping (SLAM) systems. To achieve this, the gold standard is Bundle Adjustment (BA). Modern 3D LiDARs now retain higher resolutions that enable the creation of point cloud images resembling those taken by conventional cameras. Nevertheless, the typical effective global refinement techniques employed for RGB-D sensors are not widely applied to LiDARs. This paper presents a novel BA photometric strategy that accounts for both RGB-D and LiDAR in the same way. Our work can be used on top of any SLAM/GNSS estimate to improve and refine the initial trajectory. We conducted different experiments using these two depth sensors on public benchmarks. Our results show that our system performs on par or better compared to other state-of-the-art ad-hoc SLAM/BA strategies, free from data association and without making assumptions about the environment. In addition, we present the benefit of jointly using RGB-D and LiDAR within our unified method. We finally release an open-source CUDA/C++ implementation.Comment: 11 pages, 9 figure

A Joint Intensity and Depth Co-Sparse Analysis Model for Depth Map Super-Resolution

High-resolution depth maps can be inferred from low-resolution depth measurements and an additional high-resolution intensity image of the same scene. To that end, we introduce a bimodal co-sparse analysis model, which is able to capture the interdependency of registered intensity and depth information. This model is based on the assumption that the co-supports of corresponding bimodal image structures are aligned when computed by a suitable pair of analysis operators. No analytic form of such operators exist and we propose a method for learning them from a set of registered training signals. This learning process is done offline and returns a bimodal analysis operator that is universally applicable to natural scenes. We use this to exploit the bimodal co-sparse analysis model as a prior for solving inverse problems, which leads to an efficient algorithm for depth map super-resolution.Comment: 13 pages, 4 figure

Co-Fusion: Real-time Segmentation, Tracking and Fusion of Multiple Objects

In this paper we introduce Co-Fusion, a dense SLAM system that takes a live stream of RGB-D images as input and segments the scene into different objects (using either motion or semantic cues) while simultaneously tracking and reconstructing their 3D shape in real time. We use a multiple model fitting approach where each object can move independently from the background and still be effectively tracked and its shape fused over time using only the information from pixels associated with that object label. Previous attempts to deal with dynamic scenes have typically considered moving regions as outliers, and consequently do not model their shape or track their motion over time. In contrast, we enable the robot to maintain 3D models for each of the segmented objects and to improve them over time through fusion. As a result, our system can enable a robot to maintain a scene description at the object level which has the potential to allow interactions with its working environment; even in the case of dynamic scenes.Comment: International Conference on Robotics and Automation (ICRA) 2017, http://visual.cs.ucl.ac.uk/pubs/cofusion, https://github.com/martinruenz/co-fusio

Learning a Joint Embedding of Multiple Satellite Sensors: A Case Study for Lake Ice Monitoring

Fusing satellite imagery acquired with different sensors has been a long-standing challenge of Earth observation, particularly across different modalities such as optical and synthetic aperture radar (SAR) images. Here, we explore the joint analysis of imagery from different sensors in the light of representation learning: we propose to learn a joint embedding of multiple satellite sensors within a deep neural network. Our application problem is the monitoring of lake ice on Alpine lakes. To reach the temporal resolution requirement of the Swiss Global Climate Observing System (GCOS) office, we combine three image sources: Sentinel-1 SAR (S1-SAR), Terra moderate resolution imaging spectroradiometer (MODIS), and Suomi-NPP visible infrared imaging radiometer suite (VIIRS). The large gaps between the optical and SAR domains and between the sensor resolutions make this a challenging instance of the sensor fusion problem. Our approach can be classified as a late fusion that is learned in a data-driven manner. The proposed network architecture has separate encoding branches for each image sensor, which feed into a single latent embedding, i.e., a common feature representation shared by all inputs, such that subsequent processing steps deliver comparable output irrespective of which sort of input image was used. By fusing satellite data, we map lake ice at a temporal resolution of 91% [respectively, mean per-class Intersection-over-Union (mIoU) scores >60%] and generalizes well across different lakes and winters. Moreover, it sets a new state-of-the-art for determining the important ice-on and ice-off dates for the target lakes, in many cases meeting the GCOS requirement

Development of a probabilistic perception system for camera-lidar sensor fusion

La estimación de profundidad usando diferentes sensores es uno de los desafíos clave para dotar a las máquinas autónomas de sólidas capacidades de percepción robótica. Ha habido un avance sobresaliente en el desarrollo de técnicas de estimación de profundidad unimodales basadas en cámaras monoculares, debido a su alta resolución o sensores LiDAR, debido a los datos geométricos precisos que proporcionan. Sin embargo, cada uno de ellos presenta inconvenientes inherentes, como la alta sensibilidad a los cambios en las condiciones de iluminación en el caso delas cámaras y la resolución limitada de los sensores LiDAR. La fusión de sensores se puede utilizar para combinar los méritos y compensar las desventajas de estos dos tipos de sensores. Sin embargo, los métodos de fusión actuales funcionan a un alto nivel. Procesan los flujos de datos de los sensores de forma independiente y combinan las estimaciones de alto nivel obtenidas para cada sensor. En este proyecto, abordamos el problema en un nivel bajo, fusionando los flujos de sensores sin procesar, obteniendo así estimaciones de profundidad que son densas y precisas, y pueden usarse como una fuente de datos multimodal unificada para problemas de estimación de nivel superior. Este trabajo propone un modelo de campo aleatorio condicional (CRF) con múltiples potenciales de geometría y apariencia que representa a la perfección el problema de estimar mapas de profundidad densos a partir de datos de cámara y LiDAR. El modelo se puede optimizar de manera eficiente utilizando el algoritmo Conjúgate Gradient Squared (CGS). El método propuesto se evalúa y compara utilizando el conjunto de datos proporcionado por KITTI Datset. Adicionalmente, se evalúa cualitativamente el modelo, usando datos adquiridos por el autor de esté trabajoMulti-modal depth estimation is one of the key challenges for endowing autonomous machines with robust robotic perception capabilities. There has been an outstanding advance in the development of uni-modal depth estimation techniques based on either monocular cameras, because of their rich resolution or LiDAR sensors due to the precise geometric data they provide. However, each of them suffers from some inherent drawbacks like high sensitivity to changes in illumination conditions in the case of cameras and limited resolution for the LiDARs. Sensor fusion can be used to combine the merits and compensate the downsides of these two kinds of sensors. Nevertheless, current fusion methods work at a high level. They processes sensor data streams independently and combine the high level estimates obtained for each sensor. In this thesis, I tackle the problem at a low level, fusing the raw sensor streams, thus obtaining depth estimates which are both dense and precise, and can be used as a unified multi-modal data source for higher level estimation problems. This work proposes a Conditional Random Field (CRF) model with multiple geometry and appearance potentials that seamlessly represents the problem of estimating dense depth maps from camera and LiDAR data. The model can be optimized efficiently using the Conjugate Gradient Squared (CGS) algorithm. The proposed method was evaluated and compared with the state-of-the-art using the commonly used KITTI benchmark dataset. In addition, the model is qualitatively evaluated using data acquired by the author of this work.MaestríaMagíster en Ingeniería de Desarrollo de Producto

Development of a probabilistic perception system for camera-lidar sensor fusion

La estimación de profundidad usando diferentes sensores es uno de los desafíos clave para dotar a las máquinas autónomas de sólidas capacidades de percepción robótica. Ha habido un avance sobresaliente en el desarrollo de técnicas de estimación de profundidad unimodales basadas en cámaras monoculares, debido a su alta resolución o sensores LiDAR, debido a los datos geométricos precisos que proporcionan. Sin embargo, cada uno de ellos presenta inconvenientes inherentes, como la alta sensibilidad a los cambios en las condiciones de iluminación en el caso delas cámaras y la resolución limitada de los sensores LiDAR. La fusión de sensores se puede utilizar para combinar los méritos y compensar las desventajas de estos dos tipos de sensores. Sin embargo, los métodos de fusión actuales funcionan a un alto nivel. Procesan los flujos de datos de los sensores de forma independiente y combinan las estimaciones de alto nivel obtenidas para cada sensor. En este proyecto, abordamos el problema en un nivel bajo, fusionando los flujos de sensores sin procesar, obteniendo así estimaciones de profundidad que son densas y precisas, y pueden usarse como una fuente de datos multimodal unificada para problemas de estimación de nivel superior. Este trabajo propone un modelo de campo aleatorio condicional (CRF) con múltiples potenciales de geometría y apariencia que representa a la perfección el problema de estimar mapas de profundidad densos a partir de datos de cámara y LiDAR. El modelo se puede optimizar de manera eficiente utilizando el algoritmo Conjúgate Gradient Squared (CGS). El método propuesto se evalúa y compara utilizando el conjunto de datos proporcionado por KITTI Datset. Adicionalmente, se evalúa cualitativamente el modelo, usando datos adquiridos por el autor de esté trabajoMulti-modal depth estimation is one of the key challenges for endowing autonomous machines with robust robotic perception capabilities. There has been an outstanding advance in the development of uni-modal depth estimation techniques based on either monocular cameras, because of their rich resolution or LiDAR sensors due to the precise geometric data they provide. However, each of them suffers from some inherent drawbacks like high sensitivity to changes in illumination conditions in the case of cameras and limited resolution for the LiDARs. Sensor fusion can be used to combine the merits and compensate the downsides of these two kinds of sensors. Nevertheless, current fusion methods work at a high level. They processes sensor data streams independently and combine the high level estimates obtained for each sensor. In this thesis, I tackle the problem at a low level, fusing the raw sensor streams, thus obtaining depth estimates which are both dense and precise, and can be used as a unified multi-modal data source for higher level estimation problems. This work proposes a Conditional Random Field (CRF) model with multiple geometry and appearance potentials that seamlessly represents the problem of estimating dense depth maps from camera and LiDAR data. The model can be optimized efficiently using the Conjugate Gradient Squared (CGS) algorithm. The proposed method was evaluated and compared with the state-of-the-art using the commonly used KITTI benchmark dataset. In addition, the model is qualitatively evaluated using data acquired by the author of this work.MaestríaMagíster en Ingeniería de Desarrollo de Producto