Joint relay and antenna selection for full-duplex AF relay networks

In this paper, we propose a joint relay and antenna selection scheme in general full-duplex (FD) relay networks with one source, one destination and N FD amplify-and-forward (AF) relays. Each FD relay is equipped with two antennas, one for receiving and one for transmitting. We consider a joint antenna and relay selection scheme to optimize the end-to-end error performance. In the proposed scheme, each relay adaptively selects the transmit antenna and receive antenna based on the instantaneous channel conditions, and the optimal single relay with the optimal Tx/Rx antenna configuration is selected to optimize the end-to-end performance of the system transmission. This is in contrast to the conventional pure FD relay selection, where the Tx and Rx FD antenna of each relay are fixed. The proposed scheme achieves an extra space diversity due to the antenna selection at the relay nodes, and considerably improves the system performance compared to the conventional FD relay selection. Furthermore, closed-form expressions for the outage probability and average symbol error rate (SER) are derived. The analytical results are verified by the computer simulations. Results show that the proposed scheme outperforms the conventional full-duplex relay selection scheme with fixed relay Tx and Rx antennas. ? 2014 IEEE.EI

Performance Analysis in Full-Duplex Relaying Systems withWireless Power Transfer

Energy harvesting (EH) technology has become increasingly attractive as an appealing solution to provide long-lasting power for energy-constrained wireless cooperative sensor networks. EH in such networks is particularly important as it can enable information relaying. Different from absorbing energy from intermittent and unpredictable nature, such as solar, wind, and vibration, harvesting from radio frequency (RF) radiated by ambient transmitters has received tremendous attention. The RF signal can convey both information and energy at the same time, which facilitates the development of simultaneous wireless information and power transfer. Besides, ambient RF is widely available from the base station, WIFI, and mobile phone in the current information era. However, some open issues associated with EH are existing in the state-of-art. One of the key challenges is rapid energy loss during the transferring process, especially for long-distance transmission. The other challenge is the design of protocols to optimally coordinate between information and power transmission. Meanwhile, in-band full-duplex (IBFD) communication have gained considerable attraction by researchers, which has the ability to improve system spectral efficiency. IBFD can receive information and forward information at the same time on the same frequency. Since the RF signal can be superimposed, the antenna of the IBFD system receives the RF signal from both desired transmitter and local transmitter. Due to the short distance of the local transmission signals, the received signal power is much larger than the desired transmission signals, which results in faulty receiving of the desired signals. Therefore, it is of great significance to study the local self-interference cancellation method of the IBFD system. In the recent state-of-art, three main types of self-interference cancellations are researched, which are passive cancellations, digital cancellations, and analog cancellations. In this thesis, we study polarization-enabled digital self-interference cancellation (PDC) scheme in IBFD EH systems which cancels self-interference by antenna polarization (propagation domain) and digital processing (digital domain). The theme of this thesis is to address the following two questions: how the selfinterference would be canceled in the IBFD EH system and how to optimize key performances of the system to optimal system performances. This thesis makes five research contributions in the important area of IBFD relaying systems with wireless power transfer. Their applications are primarily in the domains of the Internet of Things (IoT) and 5G-and-beyond wireless networks. The overarching objective of the thesis is to construct analytical system models and evaluate system performance (outage probability, throughput, error) in various scenarios. In all five contributions, system models and analytical expressions of the performance metrics are derived, followed by computer simulations for performance analysis

Full duplex-transceivers : architectures and performance analysis

PhD ThesisThe revolution of the 5G communication systems will result in 10,000 times increase in the total mobile broadband traffic in the 2020s, which will increase the demand on the limited wireless spectrum. This has highlighted the need for an efficient frequency-reuse technique that can meet the ever-increasing demand on the available frequency resources. In-band full-duplex (FD) wireless technology that enables the transceiver nodes to transmit and receive simultaneously over the same frequency band, has gained tremendous attention as a promising technology to double the spectral efficiency of the traditional half-duplex (HD) systems. However, this technology faces a formidable challenge, that is the large power difference between the self-interference (SI) signal and the signal of interest from a remote transceiver node. In this thesis, we focus on the architecture of the FD transceivers and investigate their ability to approximately double the throughput and the spectral efficiency of the conventional HD systems. Moreover, this thesis is concerned with the design of efficient self-interference cancellation schemes that can be combined with the architecture of the FD transceiver nodes in order to effectively suppress the SI signal and enable the FD mode. In particular, an orthogonal frequency-division multiplexing (OFDM) based amplify-and-forward (AF) FD physical-layer network coding (PLNC) system is proposed. To enable the FD mode in the proposed system, a hybrid SIC scheme that is a combination of passive SIC mechanism and active SIC technique is exploited at each transceiver node of that system. Next, we propose an adaptive SIC scheme, which utilizes the normalized least-mean-square (NLMS) algorithm to effectively suppress the SI signal to the level of the noise floor. The proposed adaptive SIC is then utilized in a denoise-and-forward (DNF) FD-PLNC system to enable the FD mode. Finally, we introduce a novel overthe- air SIC scheme that can effectively mitigate the SI signal before it arrives the local analog-to-digital converter (ADC) of the FD transceiver nodes. Furthermore, the impact of the hardware impairments on the performance of the introduced SIC scheme is examined and characterized.Iraq, and the Ministry of Higher Education and Scientific Research (MOHSR