10,519 research outputs found
Coverage Protocols for Wireless Sensor Networks: Review and Future Directions
The coverage problem in wireless sensor networks (WSNs) can be generally
defined as a measure of how effectively a network field is monitored by its
sensor nodes. This problem has attracted a lot of interest over the years and
as a result, many coverage protocols were proposed. In this survey, we first
propose a taxonomy for classifying coverage protocols in WSNs. Then, we
classify the coverage protocols into three categories (i.e. coverage aware
deployment protocols, sleep scheduling protocols for flat networks, and
cluster-based sleep scheduling protocols) based on the network stage where the
coverage is optimized. For each category, relevant protocols are thoroughly
reviewed and classified based on the adopted coverage techniques. Finally, we
discuss open issues (and recommend future directions to resolve them)
associated with the design of realistic coverage protocols. Issues such as
realistic sensing models, realistic energy consumption models, realistic
connectivity models and sensor localization are covered
A Coverage Monitoring algorithm based on Learning Automata for Wireless Sensor Networks
To cover a set of targets with known locations within an area with limited or
prohibited ground access using a wireless sensor network, one approach is to
deploy the sensors remotely, from an aircraft. In this approach, the lack of
precise sensor placement is compensated by redundant de-ployment of sensor
nodes. This redundancy can also be used for extending the lifetime of the
network, if a proper scheduling mechanism is available for scheduling the
active and sleep times of sensor nodes in such a way that each node is in
active mode only if it is required to. In this pa-per, we propose an efficient
scheduling method based on learning automata and we called it LAML, in which
each node is equipped with a learning automaton, which helps the node to select
its proper state (active or sleep), at any given time. To study the performance
of the proposed method, computer simulations are conducted. Results of these
simulations show that the pro-posed scheduling method can better prolong the
lifetime of the network in comparison to similar existing method
Wireless Backhaul Node Placement for Small Cell Networks
Small cells have been proposed as a vehicle for wireless networks to keep up
with surging demand. Small cells come with a significant challenge of providing
backhaul to transport data to(from) a gateway node in the core network. Fiber
based backhaul offers the high rates needed to meet this requirement, but is
costly and time-consuming to deploy, when not readily available. Wireless
backhaul is an attractive option for small cells as it provides a less
expensive and easy-to-deploy alternative to fiber. However, there are multitude
of bands and features (e.g. LOS/NLOS, spatial multiplexing etc.) associated
with wireless backhaul that need to be used intelligently for small cells.
Candidate bands include: sub-6 GHz band that is useful in non-line-of-sight
(NLOS) scenarios, microwave band (6-42 GHz) that is useful in point-to-point
line-of-sight (LOS) scenarios, and millimeter wave bands (e.g. 60, 70 and 80
GHz) that are recently being commercially used in LOS scenarios. In many
deployment topologies, it is advantageous to use aggregator nodes, located at
the roof tops of tall buildings near small cells. These nodes can provide high
data rate to multiple small cells in NLOS paths, sustain the same data rate to
gateway nodes using LOS paths and take advantage of all available bands. This
work performs the joint cost optimal aggregator node placement, power
allocation, channel scheduling and routing to optimize the wireless backhaul
network. We formulate mixed integer nonlinear programs (MINLP) to capture the
different interference and multiplexing patterns at sub-6 GHz and microwave
band. We solve the MINLP through linear relaxation and branch-and-bound
algorithm and apply our algorithm in an example wireless backhaul network of
downtown Manhattan.Comment: Invited paper at Conference on Information Science & Systems (CISS)
201
A Comprehensive Survey of Potential Game Approaches to Wireless Networks
Potential games form a class of non-cooperative games where unilateral
improvement dynamics are guaranteed to converge in many practical cases. The
potential game approach has been applied to a wide range of wireless network
problems, particularly to a variety of channel assignment problems. In this
paper, the properties of potential games are introduced, and games in wireless
networks that have been proven to be potential games are comprehensively
discussed.Comment: 44 pages, 6 figures, to appear in IEICE Transactions on
Communications, vol. E98-B, no. 9, Sept. 201
Distributed Detection and Estimation in Wireless Sensor Networks
In this article we consider the problems of distributed detection and
estimation in wireless sensor networks. In the first part, we provide a general
framework aimed to show how an efficient design of a sensor network requires a
joint organization of in-network processing and communication. Then, we recall
the basic features of consensus algorithm, which is a basic tool to reach
globally optimal decisions through a distributed approach. The main part of the
paper starts addressing the distributed estimation problem. We show first an
entirely decentralized approach, where observations and estimations are
performed without the intervention of a fusion center. Then, we consider the
case where the estimation is performed at a fusion center, showing how to
allocate quantization bits and transmit powers in the links between the nodes
and the fusion center, in order to accommodate the requirement on the maximum
estimation variance, under a constraint on the global transmit power. We extend
the approach to the detection problem. Also in this case, we consider the
distributed approach, where every node can achieve a globally optimal decision,
and the case where the decision is taken at a central node. In the latter case,
we show how to allocate coding bits and transmit power in order to maximize the
detection probability, under constraints on the false alarm rate and the global
transmit power. Then, we generalize consensus algorithms illustrating a
distributed procedure that converges to the projection of the observation
vector onto a signal subspace. We then address the issue of energy consumption
in sensor networks, thus showing how to optimize the network topology in order
to minimize the energy necessary to achieve a global consensus. Finally, we
address the problem of matching the topology of the network to the graph
describing the statistical dependencies among the observed variables.Comment: 92 pages, 24 figures. To appear in E-Reference Signal Processing, R.
Chellapa and S. Theodoridis, Eds., Elsevier, 201
An ant colony optimization approach for maximizing the lifetime of heterogeneous wireless sensor networks
Maximizing the lifetime of wireless sensor networks (WSNs) is a challenging problem. Although some methods exist to address the problem in homogeneous WSNs, research on this problem in heterogeneous WSNs have progressed at a slow pace. Inspired by the promising performance of ant colony optimization (ACO) to solve combinatorial problems, this paper proposes an ACO-based approach that can maximize the lifetime of heterogeneous WSNs. The methodology is based on finding the maximum number of disjoint connected covers that satisfy both sensing coverage and network connectivity. A construction graph is designed with each vertex denoting the assignment of a device in a subset. Based on pheromone and heuristic information, the ants seek an optimal path on the construction graph to maximize the number of connected covers. The pheromone serves as a metaphor for the search experiences in building connected covers. The heuristic information is used to reflect the desirability of device assignments. A local search procedure is designed to further improve the search efficiency. The proposed approach has been applied to a variety of heterogeneous WSNs. The results show that the approach is effective and efficient in finding high-quality solutions for maximizing the lifetime of heterogeneous WSNs
Robotic Wireless Sensor Networks
In this chapter, we present a literature survey of an emerging, cutting-edge,
and multi-disciplinary field of research at the intersection of Robotics and
Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor
Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system
that aims to achieve certain sensing goals while meeting and maintaining
certain communication performance requirements, through cooperative control,
learning and adaptation. While both of the component areas, i.e., Robotics and
WSN, are very well-known and well-explored, there exist a whole set of new
opportunities and research directions at the intersection of these two fields
which are relatively or even completely unexplored. One such example would be
the use of a set of robotic routers to set up a temporary communication path
between a sender and a receiver that uses the controlled mobility to the
advantage of packet routing. We find that there exist only a limited number of
articles to be directly categorized as RWSN related works whereas there exist a
range of articles in the robotics and the WSN literature that are also relevant
to this new field of research. To connect the dots, we first identify the core
problems and research trends related to RWSN such as connectivity,
localization, routing, and robust flow of information. Next, we classify the
existing research on RWSN as well as the relevant state-of-the-arts from
robotics and WSN community according to the problems and trends identified in
the first step. Lastly, we analyze what is missing in the existing literature,
and identify topics that require more research attention in the future
Markov Decision Processes with Applications in Wireless Sensor Networks: A Survey
Wireless sensor networks (WSNs) consist of autonomous and resource-limited
devices. The devices cooperate to monitor one or more physical phenomena within
an area of interest. WSNs operate as stochastic systems because of randomness
in the monitored environments. For long service time and low maintenance cost,
WSNs require adaptive and robust methods to address data exchange, topology
formulation, resource and power optimization, sensing coverage and object
detection, and security challenges. In these problems, sensor nodes are to make
optimized decisions from a set of accessible strategies to achieve design
goals. This survey reviews numerous applications of the Markov decision process
(MDP) framework, a powerful decision-making tool to develop adaptive algorithms
and protocols for WSNs. Furthermore, various solution methods are discussed and
compared to serve as a guide for using MDPs in WSNs
- …