68 research outputs found

    Robust and Low-Complexity Timing Synchronization for DCO-OFDM LiFi Systems

    Get PDF
    Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Light fidelity (LiFi), using light emitting devices such as light emitting diodes (LEDs) which are operating in the visible light spectrum between 400 and 800 THz, provides a new layer of wireless connectivity within existing heterogeneous radio frequency wireless networks. Link data rates of 10 Gbps from a single transmitter have been demonstrated under ideal laboratory conditions. Synchronization is one of these issues usually assumed to be ideal. However, in a practical deployment, this is no longer a valid assumption. Therefore, we propose for the first time a low-complexity maximum likelihood-based timing synchronization process that includes frame detection and sampling clock synchronization for direct current-biased optical orthogonal frequency division multiplexing LiFi systems. The proposed timing synchronization structure can reduce the high-complexity two-dimensional search to two low-complexity one-dimensional searches for frame detection and sampling clock synchronization. By employing a single training block, frame detection can be realized, and then sampling clock offset (SCO) and channels can be estimated jointly. We propose three frame detection approaches, which are robust against the combined effects of both SCO and the low-pass characteristic of LEDs. Furthermore, we derive the Cramér-Rao lower bounds (CRBs) of SCO and channel estimations, respectively. In order to minimize the CRBs and improve synchronization performance, a single training block is designed based on the optimization of training sequences, the selection of training length, and the selection of direct current (DC) bias. Therefore, the designed training block allows us to analyze the trade-offs between estimation accuracy, spectral efficiency, energy efficiency, and complexity. The proposed timing synchronization mechanism demonstrates low complexity and robustness benefits and provides performance significantly better than achieved with existing methods.Peer reviewe

    Visible Light Communication (VLC)

    Get PDF
    Visible light communication (VLC) using light-emitting diodes (LEDs) or laser diodes (LDs) has been envisioned as one of the key enabling technologies for 6G and Internet of Things (IoT) systems, owing to its appealing advantages, including abundant and unregulated spectrum resources, no electromagnetic interference (EMI) radiation and high security. However, despite its many advantages, VLC faces several technical challenges, such as the limited bandwidth and severe nonlinearity of opto-electronic devices, link blockage and user mobility. Therefore, significant efforts are needed from the global VLC community to develop VLC technology further. This Special Issue, “Visible Light Communication (VLC)”, provides an opportunity for global researchers to share their new ideas and cutting-edge techniques to address the above-mentioned challenges. The 16 papers published in this Special Issue represent the fascinating progress of VLC in various contexts, including general indoor and underwater scenarios, and the emerging application of machine learning/artificial intelligence (ML/AI) techniques in VLC

    A Novel PAPR Reduction in Filter Bank Multi-Carrier (FBMC) with Offset Quadrature Amplitude Modulation (OQAM) Based VLC Systems

    Get PDF
    The peak to average power ratio (PAPR) is one of the major problem with multicarrier-based systems. Due to its improved spectral efficiency and decreased PAPR, Filter Bank Multicarrier (FBMC) has recently become an effective alternative to the orthogonal multiplexing division (OFDM). For filter bank multicarrier communication/offset quadrature amplitude modulation-Visible light communication (FBMC/OQAM-VLC) systems is proposed a PAPR reduction technique. The suggested approach overlaps the proposed FBMC/OQAM-based VLC data signal with the existing signals. Non-redundant signals and data signals do not overlap in the frequency domain because data signals are scattered on odd subcarriers whereas built signals use even subcarriers. To reduce the effects of large-amplitude signal reduction, the suggested technique converts negative signals into positive signals rather than clipping them off as in conventional FBMC-based VLC systems. The PAPR reduction and bit error rate (BER) are realized using a scaling factor in the transformed signals. Complementary cumulative distribution function(CCDF) and BER are used to calculate the performance of the proposed approach. The presented study found that FBMC/OQAM-VLC systems to achieve a good trade-off between PAPR reduction and BER

    A two phase framework for visible light-based positioning in an indoor environment: performance, latency, and illumination

    Full text link
    Recently with the advancement of solid state lighting and the application thereof to Visible Light Communications (VLC), the concept of Visible Light Positioning (VLP) has been targeted as a very attractive indoor positioning system (IPS) due to its ubiquity, directionality, spatial reuse, and relatively high modulation bandwidth. IPSs, in general, have 4 major components (1) a modulation, (2) a multiple access scheme, (3) a channel measurement, and (4) a positioning algorithm. A number of VLP approaches have been proposed in the literature and primarily focus on a fixed combination of these elements and moreover evaluate the quality of the contribution often by accuracy or precision alone. In this dissertation, we provide a novel two-phase indoor positioning algorithmic framework that is able to increase robustness when subject to insufficient anchor luminaries and also incorporate any combination of the four major IPS components. The first phase provides robust and timely albeit less accurate positioning proximity estimates without requiring more than a single luminary anchor using time division access to On Off Keying (OOK) modulated signals while the second phase provides a more accurate, conventional, positioning estimate approach using a novel geometric constrained triangulation algorithm based on angle of arrival (AoA) measurements. However, this approach is still an application of a specific combination of IPS components. To achieve a broader impact, the framework is employed on a collection of IPS component combinations ranging from (1) pulsed modulations to multicarrier modulations, (2) time, frequency, and code division multiple access, (3) received signal strength (RSS), time of flight (ToF), and AoA, as well as (4) trilateration and triangulation positioning algorithms. Results illustrate full room positioning coverage ranging with median accuracies ranging from 3.09 cm to 12.07 cm at 50% duty cycle illumination levels. The framework further allows for duty cycle variation to include dimming modulations and results range from 3.62 cm to 13.15 cm at 20% duty cycle while 2.06 cm to 8.44 cm at a 78% duty cycle. Testbed results reinforce this frameworks applicability. Lastly, a novel latency constrained optimization algorithm can be overlaid on the two phase framework to decide when to simply use the coarse estimate or when to expend more computational resources on a potentially more accurate fine estimate. The creation of the two phase framework enables robust, illumination, latency sensitive positioning with the ability to be applied within a vast array of system deployment constraints

    DC-bias for Optical OFDM in Visible Light Communications

    Get PDF
    The requirement of a DC-bias is known to make DC-biased Optical Orthogonal Frequency Division Multiplexing (DCO-OFDM) less energy efficient. This can be improved by Asymmetrically Clipped Optical OFDM (ACO-OFDM), Pulse Amplitude Modulated OFDM (PAM-OFDM) or Flip-OFDM, but these variants use the bandwidth inefficiently. Our trade-off between energy and spectrum efficiency considers a given limited channel bandwidth of the Light Emitting Diode (LED) and then attempts to get the highest throughput per unit of energy. We investigate previous findings that clipped OFDM can be more attractive in a low-SNR regime. More specifically, we consider Visible Light Communication (VLC) in which the average light level, i.e., the bias, is prescribed by illumination requirements, thus comes for free. ACO/PAM/Flip-OFDM can convert the DC-bias into power for communication, but all variants of OFDM, including DCO-OFDM consume extra electrical power. We conclude that in this scenario, advantages attributed to ACO/PAM/Flip-OFDM vanish, as DCO-OFDM outperforms its variants in all SNR conditions, in terms of achieved throughput over a bandlimited channel as a function of extra electrical power required. For hybrid solutions, such as Asymmetrically clipped DC biased Optical OFDM (ADO-OFDM) and Hybrid ACO-OFDM (HACO-OFDM), we optimize a new adaptive power and rate splitting between odd (clipped) and even (biased/clipped) subcarriers to balance power and bandwidth efficiency

    Throughput and Link Design Choices for Communication over LED Optical Wireless Channels

    Get PDF

    Lights and Shadows: A Comprehensive Survey on Cooperative and Precoding Schemes to Overcome LOS Blockage and Interference in Indoor VLC

    Get PDF
    Visible light communications (VLC) have received significant attention as a way of moving part of the saturated indoor wireless traffic to the wide and unregulated visible optical spectrum. Nowadays, VLC are considered as a suitable technology, for several applications such as high-rate data transmission, supporting internet of things communications or positioning. The signal processing originally derived from radio-frequency (RF) systems such as cooperative or precoding schemes can be applied to VLC. However, its implementation is not straightforward. Furthermore, unlike RF transmission, VLC present a predominant line-of-sight link, although a weak non-LoS component may appear due to the reflection of the light on walls, floor, ceiling and nearby objects. Blocking effects may compromise the performance of the aforementioned transmission schemes. There exist several surveys in the literature focused on VLC and its applications, but the management of the shadowing and interference in VLC requires a comprehensive study. To fill this gap, this work introduces the implementation of cooperative and precoding schemes to VLC, while remarking their benefits and drawbacks for overcoming the shadowing effects. After that, the combination of both cooperative and precoding schemes is analyzed as a way of providing resilient VLC networks. Finally, we propose several open issues that the cooperative and precoding schemes must face in order to provide satisfactory VLC performance in indoor scenarios.This work has been supported partially by Spanish National Project TERESA-ADA(TEC2017-90093-C3-2-R) (MINECO/AEI/FEDER, UE), the research project GEOVEOLUZ-CM-UC3Mfunded by the call “Programa de apoyo a la realización de proyectos interdisciplinares de I+D parajóvenes investigadores de la Universidad Carlos III de Madrid 2019-2020” under the frame ofthe Convenio Plurianual Comunidad de Madrid-Universidad Carlos III de Madrid and projectMadrid Flight on Chip (Innovation Cooperative Projects Comunidad of Madrid - HUBS 2018/MadridFlightOnChip). Additionally, it has been supported partially by the Juan de la CiervaIncorporación grant IJC2019-040317-I and Juan de la Cierva Formación grant (FJC2019-039541-I/AEI/10.13039/501100011033)
    corecore