Metameric MIMO-OOK transmission scheme using multiple RGB LEDs

In this work, we propose a novel visible light communication (VLC) scheme utilizing multiple di erent red green and blue triplets each with a di erent emission spectrum of red, green and blue for mitigating the e ect of interference due to di erent colors using spatial multiplexing. On-o keying modulation is considered and its e ect on light emission in terms of flickering, dimming and color rendering is discussed so as to demonstrate how metameric properties have been considered. At the receiver, multiple photodiodes with color filter-tuned on each transmit light emitting diode (LED) are employed. Three di erent detection mechanisms of color zero forcing, minimum mean square error estimation and minimum mean square error equalization are then proposed. The system performance of the proposed scheme is evaluated both with computer simulations and tests with an Arduino board implementatio

Deep Learning Framework for Wireless Systems: Applications to Optical Wireless Communications

Optical wireless communication (OWC) is a promising technology for future wireless communications owing to its potentials for cost-effective network deployment and high data rate. There are several implementation issues in the OWC which have not been encountered in radio frequency wireless communications. First, practical OWC transmitters need an illumination control on color, intensity, and luminance, etc., which poses complicated modulation design challenges. Furthermore, signal-dependent properties of optical channels raise non-trivial challenges both in modulation and demodulation of the optical signals. To tackle such difficulties, deep learning (DL) technologies can be applied for optical wireless transceiver design. This article addresses recent efforts on DL-based OWC system designs. A DL framework for emerging image sensor communication is proposed and its feasibility is verified by simulation. Finally, technical challenges and implementation issues for the DL-based optical wireless technology are discussed.Comment: To appear in IEEE Communications Magazine, Special Issue on Applications of Artificial Intelligence in Wireless Communication

SLIPT in Joint Dimming Multi-LED OWC Systems with Rate Splitting Multiple Access

Optical wireless communication (OWC) systems with multiple light-emitting diodes (LEDs) have recently been explored to support energy-limited devices via simultaneous lightwave information and power transfer (SLIPT). The energy consumption, however, becomes considerable by increasing the number of incorporated LEDs. This paper proposes a joint dimming (JD) scheme that lowers the consumed power of a SLIPT-enabled OWC system by controlling the number of active LEDs. We further enhance the data rate of this system by utilizing rate splitting multiple access (RSMA). More specifically, we formulate a data rate maximization problem to optimize the beamforming design, LED selection and RSMA rate adaptation that guarantees the power budget of the OWC transmitter, as well as the quality-of-service (QoS) and an energy harvesting level for users. We propose a dynamic resource allocation solution based on proximal policy optimization (PPO) reinforcement learning. In simulations, the optimal dimming level is determined to initiate a trade-off between the data rate and power consumption. It is also verified that RSMA significantly improves the data rate.Comment: Accepted in ICC 202

Visible Light Communication (VLC)

Visible light communication (VLC) using light-emitting diodes (LEDs) or laser diodes (LDs) has been envisioned as one of the key enabling technologies for 6G and Internet of Things (IoT) systems, owing to its appealing advantages, including abundant and unregulated spectrum resources, no electromagnetic interference (EMI) radiation and high security. However, despite its many advantages, VLC faces several technical challenges, such as the limited bandwidth and severe nonlinearity of opto-electronic devices, link blockage and user mobility. Therefore, significant efforts are needed from the global VLC community to develop VLC technology further. This Special Issue, “Visible Light Communication (VLC)”, provides an opportunity for global researchers to share their new ideas and cutting-edge techniques to address the above-mentioned challenges. The 16 papers published in this Special Issue represent the fascinating progress of VLC in various contexts, including general indoor and underwater scenarios, and the emerging application of machine learning/artificial intelligence (ML/AI) techniques in VLC

Resource Optimization in Visible Light Communication Using Internet of Things

In the modern day, there is a serious spectrum crunch in the legacy radio frequency (RF) band, for which visible light communication (VLC) can be a promising option. VLC is a short-range wireless communication variant which uses the visible light spectrum. In this thesis, we are using a VLC-based architecture for providing scalable communications to Internet-of-Things (IoT) devices where a multi-element hemispherical bulb is used that can transmit data streams from multiple light emitting diode (LED) boards. The essence of this architecture is that it uses a Line-of-Sight (LoS) alignment protocol that handles the hand-off issue created by the movement of receivers inside a room. We start by proposing an optimization problem aiming to minimize the total consumed energy emitted by each LED taking into consideration the LEDs\u27 power budget, users\u27 perceived quality-of-service, LED-user associations, and illumination uniformity constraints. Then, because of the non-convexity of the problem, we propose to solve it in two stages: (1) We design an efficient algorithm for LED-user association for fixed LED powers, and (2) using the LED-user association, we find an approximate solution based on Taylor series to optimize the LEDs\u27 power. We devise two heuristic solutions based on this approach. The first heuristic solution, called the Low Complexity Two Stages Solution (TSS), optimizes the association between the LEDs and the mobile users before and then the power of each LED is optimized. In the second heuristic, named the Maximum Uniformity Approach, we try to improve the illumination uniformity first and then adjust the power values for each LED so that they do not go above a certain value. Finally, we illustrate the performance of our method via simulations

Joint Optimization of Illumination and Communication for a Multi-Element VLC Architecture

Because of the ever increasing demand wireless data in the modern era, the Radio Frequency (RF) spectrum is becoming more congested. The remaining RF spectrum is being shrunk at a very heavy rate, and spectral management is becoming more difficult. Mobile data is estimated to grow more than 10 times between 2013 and 2019, and due to this explosion in data usage, mobile operators are having serious concerns focusing on public Wireless Fidelity (Wi-Fi) and other alternative technologies. Visible Light Communication (VLC) is a recent promising technology complementary to RF spectrum which operates at the visible light spectrum band (roughly 400 THz to 780 THz) and it has 10,000 times bigger size than radio waves (roughly 3 kHz to 300 GHz). Due to this tremendous potential, VLC has captured a lot of interest recently as there is already an extensive deployment of energy efficient Light Emitting Diodes (LEDs). The advancements in LED technology with fast nanosecond switching times is also very encouraging. In this work, we present hybrid RF/VLC architecture which is capable of providing simultaneous lighting and communication coverage in an indoor setting. The architecture consists of a multi-element hemispherical bulb design, where it is possible to transmit multiple data streams from the multi-element hemispherical bulb using LED modules. We present the detailed components of the architecture and make simulations considering various VLC transmitter configurations. Also, we devise an approach for an efficient bulb design mechanism to maintain both illumination and communication at a satisfactory rate, and analyze it in the case of two users in a room. The approach involves formulating an optimization problem and tackling the problem using a simple partitioning algorithm. The results indicate that good link quality and high spatial reuse can be maintained in a typical indoor communication setting