Code-timing synchronization in DS-CDMA systems using space-time diversity

The synchronization of a desired user transmitting a known training sequence in a direct-sequence (DS) asynchronous code-division multiple-access (CDMA) sys-tem is addressed. It is assumed that the receiver consists of an arbitrary antenna array and works in a near-far, frequency-nonselective, slowly fading channel. The estimator that we propose is derived by applying the maximum likelihood (ML) principle to a signal model in which the contribution of all the interfering compo-nents (e.g., multiple-access interference, external interference and noise) is modeled as a Gaussian term with an unknown and arbitrary space-time correlation matrix. The main contribution of this paper is the fact that the estimator makes eÆcient use of the structure of the signals in both the space and time domains. Its perfor-mance is compared with the Cramer-Rao Bound, and with the performance of other methods proposed recently that also employ an antenna array but only exploit the structure of the signals in one of the two domains, while using the other simply as a means of path diversity. It is shown that the use of the temporal and spatial structures is necessary to achieve synchronization in heavily loaded systems or in the presence of directional external interference.Peer ReviewedPostprint (published version

Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols

In this paper, we describe direct-sequence code-division multiple-access (DS-CDMA) systems with quadriphase-shift keying in which channel estimation, coherent demodulation, and decoding are iteratively performed without the use of any training or pilot symbols. An expectation-maximization channel-estimation algorithm for the fading amplitude, phase, and the interference power spectral density (PSD) due to the combined interference and thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate codes. After initial estimates of the fading amplitude, phase, and interference PSD are obtained from the received symbols, subsequent values of these parameters are iteratively updated by using the soft feedback from the channel decoder. The updated estimates are combined with the received symbols and iteratively passed to the decoder. The elimination of pilot symbols simplifies the system design and allows either an enhanced information throughput, an improved bit error rate, or greater spectral efficiency. The interference-PSD estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication

Efficient space-frequency block coded pilot-aided channel estimation method for multiple-input-multiple-output orthogonal frequency division multiplexing systems over mobile frequency-selective fading channels

© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.An iterative pilot-aided channel estimation technique for space-frequency block coded (SFBC) multiple-input multiple-output orthogonal frequency division multiplexing systems is proposed. Traditionally, when channel estimation techniques are utilised, the SFBC information signals are decoded one block at a time. In the proposed algorithm, multiple blocks of SFBC information signals are decoded simultaneously. The proposed channel estimation method can thus significantly reduce the amount of time required to decode information signals compared to similar channel estimation methods proposed in the literature. The proposed method is based on the maximum likelihood approach that offers linearity and simplicity of implementation. An expression for the pairwise error probability (PEP) is derived based on the estimated channel. The derived PEP is then used to determine the optimal power allocation for the pilot sequence. The performance of the proposed algorithm is demonstrated in high frequency selective channels, for different number of pilot symbols, using different modulation schemes. The algorithm is also tested under different levels of Doppler shift and for different number of transmit and receive antennas. The results show that the proposed scheme minimises the error margin between slow and high speed receivers compared to similar channel estimation methods in the literature.Peer reviewe

Channel Estimation Architectures for Mobile Reception in Emerging DVB Standards

Throughout this work, channel estimation techniques have been analyzed and proposed for moderate and very high mobility DVB (digital video broadcasting) receivers, focusing on the DVB-T2 (Digital Video Broadcasting - Terrestrial 2) framework and the forthcoming DVB-NGH (Digital Video Broadcasting - Next Generation Handheld) standard. Mobility support is one of the key features of these DVB specifications, which try to deal with the challenge of enabling HDTV (high definition television) delivery at high vehicular speed. In high-mobility scenarios, the channel response varies within an OFDM (orthogonal frequency-division multiplexing) block and the subcarriers are no longer orthogonal, which leads to the so-called ICI (inter-carrier interference), making the system performance drop severely. Therefore, in order to successfully decode the transmitted data, ICI-aware detectors are necessary and accurate CSI (channel state information), including the ICI terms, is required at the receiver. With the aim of reducing the number of parameters required for such channel estimation while ensuring accurate CSI, BEM (basis expansion model) techniques have been analyzed and proposed for the high-mobility DVB-T2 scenario. A suitable clustered pilot structure has been proposed and its performance has been compared to the pilot patterns proposed in the standard. Different reception schemes that effectively cancel ICI in combination with BEM channel estimation have been proposed, including a Turbo scheme that includes a BP (belief propagation) based ICI canceler, a soft-input decision-directed BEM channel estimator and the LDPC (low-density parity check) decoder. Numerical results have been presented for the most common channel models, showing that the proposed receiver schemes allow good reception, even in receivers with extremely high mobility (up to 0.5 of normalized Doppler frequency).Doktoretza tesi honetan, hainbat kanal estimazio teknika ezberdin aztertu eta proposatu dira mugikortasun ertain eta handiko DVB (Digital Video Broadcasting) hartzaileentzat, bigarren belaunaldiko Lurreko Telebista Digitalean DVB-T2 (Digital Video Broadcasting - Terrestrial 2 ) eta hurrengo DVB-NGH (Digital Video Broadcasting - Next Generation Handheld) estandarretan oinarrututa. Mugikortasuna bigarren belaunaldiko telebista estandarrean funtsezko ezaugarri bat da, HDTV (high definition television) zerbitzuak abiadura handiko hartzaileetan ahalbidetzeko erronkari aurre egiteko nahian. Baldintza horietan, kanala OFDM (ortogonalak maiztasun-zatiketa multiplexing ) sinbolo baten barruan aldatzen da, eta subportadorak jada ez dira ortogonalak, ICI-a (inter-carrier interference) sortuz, eta sistemaren errendimendua hondatuz. Beraz, transmititutako datuak behar bezala deskodeatzeko, ICI-a ekiditeko gai diren detektagailuak eta CSI-a (channel state information) zehatza, ICI osagaiak barne, ezinbestekoak egiten dira hartzailean. Kanalaren estimazio horretarako beharrezkoak diren parametro kopurua murrizteko eta aldi berean CSI zehatza bermatzeko, BEM (basis expansion model) teknika aztertu eta proposatu da ICI kanala identifikatzeko mugikortasun handiko DVB-T2 eszenatokitan. Horrez gain, pilotu egitura egokia proposatu da, estandarrean proposatutako pilotu ereduekin alderatuz BEM estimazioan oinarritua. ICI-a baliogabetzen duten hartzaile sistema ezberdin proposatu dira, Turbo sistema barne, non BP (belief propagation) detektagailua, soft BEM estimazioa eta LDPC (low-density parity check ) deskodetzailea uztartzen diren. Ohiko kanal ereduak erabilita, simulazio emaitzak aurkeztu dira, proposatutako hartzaile sistemak mugikortasun handiko kasuetan harrera ona dutela erakutsiz, 0.5 Doppler maiztasun normalizaturaino.Esta tesis doctoral analiza y propone diferentes técnicas de estimación de canal para receptores DVB (Digital Video Broadcasting) con movilidad moderada y alta, centrándose en el estándar de segunda generación DVB-T2 (Digital Video Broadcasting - Terrestrial 2 ) y en el próximó estándar DVB-NGH (Digital Video Broadcasting - Next Generation Handheld ). La movilidad es una de las principales claves de estas especificaciones, que tratan de lidiar con el reto de permitir la recepción de señal HDTV (high definition television) en receptores móviles. En escenarios de alta movilidad, la respuesta del canal varía dentro de un símbolo OFDM (orthogonal frequency-division multiplexing ) y las subportadoras ya no son ortogonales, lo que genera la llamada ICI (inter-carrier interference), deteriorando el rendimiento de los receptores severamente. Por lo tanto, con el fin de decodificar correctamente los datos transmitidos, detectores capaces de suprimir la ICI y una precisa CSI (channel state information), incluyendo los términos de ICI, son necesarios en el receptor. Con el objetivo de reducir el número de parámetros necesarios para dicha estimación de canal, y al mismo tiempo garantizar una CSI precisa, la técnica de estimación BEM (basis expansion model) ha sido analizada y propuesta para identificar el canal con ICI en receptores DVB-T2 de alta movilidad. Además se ha propuesto una estructura de pilotos basada en clústers, comparando su rendimiento con los patrones de pilotos establecidos en el estándar. Se han propuesto diferentes sistemas de recepción que cancelan ICI en combinación con la estimación BEM, incluyendo un esquema Turbo que incluye un detector BP (belief propagation), un estimador BEM soft y un decodificador LDPC (low-density parity check). Se han presentado resultados numéricos para los modelos de canal más comunes, demostrando que los sistemas de recepción propuestos permiten la decodificación correcta de la señal incluso en receptores con movilidad muy alta (hasta 0,5 de frecuencia de Doppler normalizada)

Cramer-Rao bounds in the estimation of time of arrival in fading channels

This paper computes the Cramer-Rao bounds for the time of arrival estimation in a multipath Rice and Rayleigh fading scenario, conditioned to the previous estimation of a set of propagation channels, since these channel estimates (correlation between received signal and the pilot sequence) are sufficient statistics in the estimation of delays. Furthermore, channel estimation is a constitutive block in receivers, so we can take advantage of this information to improve timing estimation by using time and space diversity. The received signal is modeled as coming from a scattering environment that disperses the signal both in space and time. Spatial scattering is modeled with a Gaussian distribution and temporal dispersion as an exponential random variable. The impact of the sampling rate, the roll-off factor, the spatial and temporal correlation among channel estimates, the number of channel estimates, and the use of multiple sensors in the antenna at the receiver is studied and related to the mobile subscriber positioning issue. To our knowledge, this model is the only one of its kind as a result of the relationship between the space-time diversity and the accuracy of the timing estimation.Peer ReviewedPostprint (published version

Multipath Parameter Estimation from OFDM Signals in Mobile Channels

We study multipath parameter estimation from orthogonal frequency division multiplex signals transmitted over doubly dispersive mobile radio channels. We are interested in cases where the transmission is long enough to suffer time selectivity, but short enough such that the time variation can be accurately modeled as depending only on per-tap linear phase variations due to Doppler effects. We therefore concentrate on the estimation of the complex gain, delay and Doppler offset of each tap of the multipath channel impulse response. We show that the frequency domain channel coefficients for an entire packet can be expressed as the superimposition of two-dimensional complex sinusoids. The maximum likelihood estimate requires solution of a multidimensional non-linear least squares problem, which is computationally infeasible in practice. We therefore propose a low complexity suboptimal solution based on iterative successive and parallel cancellation. First, initial delay/Doppler estimates are obtained via successive cancellation. These estimates are then refined using an iterative parallel cancellation procedure. We demonstrate via Monte Carlo simulations that the root mean squared error statistics of our estimator are very close to the Cramer-Rao lower bound of a single two-dimensional sinusoid in Gaussian noise.Comment: Submitted to IEEE Transactions on Wireless Communications (26 pages, 9 figures and 3 tables