Strong practical stability based robust stabilization of uncertain discrete linear repetitive processes

Repetitive processes are a distinct class of 2D systems of both theoretical and practical interest whose dynamics evolve over a subset of the positive quadrant in the 2D plane. The stability theory for these processes originally consisted of two distinct concepts termed asymptotic stability and stability along the pass respectively where the former is a necessary condition for the latter. Stability along the pass demands a bounded-input bounded-output property over the complete positive quadrant of the 2D plane and this is a very strong requirement, especially in terms of control law design. A more feasible alternative for some cases is strong practical stability, where previous work has formulated this property and obtained necessary and sufficient conditions for its existence together with Linear Matrix Inequality (LMI) based tests, which then extend to allow control law design. This paper develops considerably simpler, and hence computationally more efficient, stability tests that extend to allow control law design in the presence of uncertainty in process model

Dissipative stability theory for linear repetitive processes with application in iterative learning control

This paper develops a new set of necessary and sufficient conditions for the stability of linear repetitive processes, based on a dissipative setting for analysis. These conditions reduce the problem of determining whether a linear repetitive process is stable or not to that of checking for the existence of a solution to a set of linear matrix inequalities (LMIs). Testing the resulting conditions only requires compu- tations with matrices whose entries are constant in comparison to alternatives where frequency response computations are required

<i>H</i>₂ and mixed <i>H</i>₂/<i>H</i>_∞ Stabilization and Disturbance Attenuation for Differential Linear Repetitive Processes

Repetitive processes are a distinct class of two-dimensional systems (i.e., information propagation in two independent directions) of both systems theoretic and applications interest. A systems theory for them cannot be obtained by direct extension of existing techniques from standard (termed 1-D here) or, in many cases, two-dimensional (2-D) systems theory. Here, we give new results towards the development of such a theory in H2 and mixed H2/H∞ settings. These results are for the sub-class of so-called differential linear repetitive processes and focus on the fundamental problems of stabilization and disturbance attenuation

Stability Tests for a Class of 2D Continuous-Discrete Linear Systems with Dynamic Boundary Conditions

Repetitive processes are a distinct class of 2D systems of both practical and theoretical interest. Their essential characteristic is repeated sweeps, termed passes, through a set of dynamics defined over a finite duration with explicit interaction between the outputs, or pass profiles, produced as the system evolves. Experience has shown that these processes cannot be studied/controlled by direct application of existing theory (in all but a few very restrictive special cases). This fact, and the growing list of applications areas, has prompted an on-going research programme into the development of a 'mature' systems theory for these processes for onward translation into reliable generally applicable controller design algorithms. This paper develops stability tests for a sub-class of so-called differential linear repetitive processes in the presence of a general set of initial conditions, where it is known that the structure of these conditions is critical to their stability properties

LMI based Stability and Stabilization of Second-order Linear Repetitive Processes

This paper develops new results on the stability and control of a class of linear repetitive processes described by a second-order matrix discrete or differential equation. These are developed by transformation of the secondorder dynamics to those of an equivalent first-order descriptor state-space model, thus avoiding the need to invert a possibly ill-conditioned leading coefficient matrix in the original model

Fast sampling control of a class of differential linear repetitive processes

Repetitive processes are a distinct class of 2D linear systems of practical and theoretical interest. Most of the available control theory for them is for the case of linear dynamics and focuses on systems theoretic properties such as stability and controllability/observability. This paper uses an extension of standard, or 1D, feedback control schemes to control a physically relevant sub-class of these processes

Relaxing Fundamental Assumptions in Iterative Learning Control

Iterative learning control (ILC) is perhaps best decribed as an open loop feedforward control technique where the feedforward signal is learned through repetition of a single task. As the name suggests, given a dynamic system operating on a finite time horizon with the same desired trajectory, ILC aims to iteratively construct the inverse image (or its approximation) of the desired trajectory to improve transient tracking. In the literature, ILC is often interpreted as feedback control in the iteration domain due to the fact that learning controllers use information from past trials to drive the tracking error towards zero. However, despite the significant body of literature and powerful features, ILC is yet to reach widespread adoption by the control community, due to several assumptions that restrict its generality when compared to feedback control. In this dissertation, we relax some of these assumptions, mainly the fundamental invariance assumption, and move from the idea of learning through repetition to two dimensional systems, specifically repetitive processes, that appear in the modeling of engineering applications such as additive manufacturing, and sketch out future research directions for increased practicality: We develop an L1 adaptive feedback control based ILC architecture for increased robustness, fast convergence, and high performance under time varying uncertainties and disturbances. Simulation studies of the behavior of this combined L1-ILC scheme under iteration varying uncertainties lead us to the robust stability analysis of iteration varying systems, where we show that these systems are guaranteed to be stable when the ILC update laws are designed to be robust, which can be done using existing methods from the literature. As a next step to the signal space approach adopted in the analysis of iteration varying systems, we shift the focus of our work to repetitive processes, and show that the exponential stability of a nonlinear repetitive system is equivalent to that of its linearization, and consequently uniform stability of the corresponding state space matrix.PhDElectrical Engineering: SystemsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/133232/1/altin_1.pd

Iterative learning control: algorithm development and experimental benchmarking

This thesis concerns the general area of experimental benchmarking of Iterative Learning Control (ILC) algorithms using two experimental facilities. ILC is an approach which is suitable for applications where the same task is executed repeatedly over the necessarily finite time duration, known as the trial length. The process is reset prior to the commencement of each execution. The basic idea of ILC is to use information from previously executed trials to update the control input to be applied during the next one. The first experimental facility is a non-minimum phase electro-mechanical system and the other is a gantry robot whose basic task is to pick and place objects on a moving conveyor under synchronization and in a fixed finite time duration that replicates many tasks encountered in the process industries. Novel contributions are made in both the development of new algorithms and, especially, in the analysis of experimental results both of a single algorithm alone and also in the comparison of the relative performance of different algorithms. In the case of non-minimum phase systems, a new algorithm, named Reference Shift ILC (RSILC) is developed that is of a two loop structure. One learning loop addresses the system lag and another tackles the possibility of a large initial plant input commonly encountered when using basic iterative learning control algorithms. After basic algorithm development and simulation studies, experimental results are given to conclude that performance improvement over previously reported algorithms is reasonable. The gantry robot has been previously used to experimentally benchmark a range of simple structure ILC algorithms, such as those based on the ILC versions of the classical proportional plus derivative error actuated controllers, and some state-space based optimal ILC algorithms. Here these results are extended by the first ever detailed experimental study of the performance of stochastic ILC algorithms together with some modifications necessary to their configuration in order to increase performance. The majority of the currently reported ILC algorithms mainly focus on reducing the trial-to-trial error but it is known that this may come at the cost of poor or unacceptable performance along the trial dynamics. Control theory for discrete linear repetitive processes is used to design ILC control laws that enable the control of both trial-to-trial error convergence and along the trial dynamics. These algorithms can be computed using Linear Matrix Inequalities (LMIs) and again the results of experimental implementation on the gantry robot are given. These results are the first ever in this key area and represent a benchmark against which alternatives can be compared. In the concluding chapter, a critical overview of the results presented is given together with areas for both short and medium term further researc