Distributed transmission schemes for wireless communication networks

In this thesis new techniques are presented to achieve performance enhancement in wireless cooperative networks. In particular, techniques to improve transmission rate and maximise end-to-end signal-to-noise ratio are described. An offset transmission scheme with full interference cancellation for a wireless cooperative network with frequency flat links and four relays is introduced. This method can asymptotically, as the size of the symbol block increases, achieve maximum transmission rate together with full cooperative diversity provided the destination node has multiple antennas. A novel full inter-relay interference cancellation method that also achieves asymptotically maximum rate and full cooperative diversity is then designed for which the destination node only requires a single antenna. Two- and four-relay selection schemes for wireless cooperative amplify and forward type networks are then studied in order to overcome the degradation of end-to-end bit error rate performance in single-relay selection networks when there are feedback errors in the relay to destination node links. Outage probability analysis for a four-relay selection scheme without interference is undertaken. Outage probability analysis of a full rate distributed transmission scheme with inter-relay interference is also studied for best single- and two-relay selection networks. The advantage of multi-relay selection when no interference occurs and when adjacent cell interference is present at the relay nodes is then shown theoretically. Simulation results for outage probability analysis are included which support the theoretical expressions. Finally, outage probability analysis of a cognitive amplify and forward type relay network with cooperation between certain secondary users, chosen by best single-, two- and four-relay selection is presented. The cognitive amplify and forward relays are assumed to exploit an underlay approach, which requires adherence to an interference constraint on the primary user. The relay selection scheme is performed either with a max−min strategy or one based on maximising exact end-to-end signal-to-noise ratio. The outage probability analyses are again confirmed by numerical evaluations

Rate enhancement and multi-relay selection schemes for application in wireless cooperative networks

In this thesis new methods are presented to achieve performance enhancement in wireless cooperative networks. In particular, techniques to improve transmission rate, mitigate asynchronous transmission and maximise end-to-end signal-to-noise ratio are described. An offset transmission scheme with full interference cancellation for a two-hop synchronous network with frequency flat links and four relays is introduced. This approach can asymptotically, as the symbol block size increases, achieve maximum transmission rate together with full cooperative diversity provided the destination node has multiple antennas. A novel full inter-relay interference cancellation method that also achieves asymptotically maximum rate and full cooperative diversity is then designed which only requires a single antenna at the destination node. Extension to asynchronous networks is then considered through the use of orthogonal frequency division multiplexing (OFDM) type transmission with a cyclic prefix, and interference cancellation techniques are designed for situations when synchronization errors are present in only the second hop or both the first and second hop. End-to-end bit error rate evaluations, with and without outer coding, are used to assess the performance of the various offset transmission schemes. Multi-relay selection methods for cooperative amplify and forward type networks are then studied in order to overcome the degradation of end-to-end bit error rate performance in single-relay selection networks when there are feedback errors in the destination to relay node links. Outage probability analysis for two and four relay selection is performed to show the advantage of multi-relay selection when no interference occurs and when adjacent cell interference is present both at the relay nodes and the destination node. Simulation studies are included which support the theoretical expressions. Finally, outage probability analysis of a cognitive amplify and forward type relay network with cooperation between certain secondary users, chosen by single and multi-relay (two and four) selection is presented. The cognitive relays are assumed to exploit an underlay approach, which requires adherence to an interference constraint on the primary user. The relay selection is performed either with a max-min strategy or one based on maximising exact end-to-end signal-to-noise ratio. The analyses are again confirmed by numerical evaluations

Low-density Parity-check Codes for Wireless Relay Networks

In wireless networks, it has always been a challenge to satisfy high traffic throughput demands, due to limited spectrum resources. In past decades, various techniques, including cooperative communications, have been developed to achieve higher communication rates. This thesis addresses the challenges imposed by cooperative wireless networks, in particular focusing on practical code constructions and designs for wireless relay networks. The thesis is divided into the following four topics: 1) constructing and designing low-density parity-check (LDPC) codes for half-duplex three-phase two-way relay channels, 2) extending LDPC code constructions to half-duplex three-way relay channels, 3) proposing maximum-rate relay selection algorithms and LDPC code constructions for the broadcast problem in wireless relay networks, and 4) proposing an iterative hard interference cancellation decoder for LDPC codes in 2-user multiple-access channels. Under the first topic, we construct codes for half-duplex three-phase two-way relay channels where two terminal nodes exchange information with the help of a relay node. Constructing codes for such channels is challenging, especially when messages are encoded into multiple streams and a destination node receives signals from multiple nodes. We first prove an achievable rate region by random coding. Next, a systematic LDPC code is constructed at the relay node where relay bits are generated from two source codewords. At the terminal nodes, messages are decoded from signals of the source node and the relay node. To analyze the performance of the codes, discretized density evolution is derived. Based on the discretized density evolution, degree distributions are optimized by iterative linear programming in three steps. The optimized codes obtained are 26% longer than the theoretic ones. For the second topic, we extend LDPC code constructions from half-duplex three-phase two-way relay channels to half-duplex three-way relay channels. An achievable rate region of half-duplex three-way relay channels is first proved. Next, LDPC codes for each sub-region of the achievable rate region are constructed, where relay bits can be generated only from a received codeword or from both the source codeword and received codewords. Under the third topic, we study relay selection and code constructions for the broadcast problem in wireless relay networks. We start with the system model, followed by a theorem stating that a node can decode a message by jointly decoding multiple blocks of received signals. Next, the maximum rate is given when a message is decoded hop-by-hop or decoded by a set of nodes in a transmission phase. Furthermore, optimal relay selection algorithms are proposed for the two relay schemes. Finally, LDPC codes are constructed for the broadcast problem in wireless relay networks. For the fourth topic, an iterative hard interference cancellation decoder for LDPC codes in 2-user multiple-access channels is proposed. The decoder is based on log-likelihood ratios (LLRs). Interference is estimated, quantized and subtracted from channel outputs. To analyze the codes, density evolution is derived. We show that the required signal-to-noise ratio (SNR) for the proposed low-complexity decoder is 0.2 dB higher than that for an existing sub-optimal belief propagation decoder at code rate 1/3.4 month

Cooperative Transmission Protocols with High Spectral Efficiency and High Diversity Order Using Multiuser Detection and Network Coding

Cooperative transmission is an emerging communication technique that takes advantages of the broadcast nature of wireless channels. However, due to low spectral efficiency and the requirement of orthogonal channels, its potential for use in future wireless networks is limited. In this paper, by making use of multiuser detection (MUD) and network coding, cooperative transmission protocols with high spectral efficiency, diversity order, and coding gain are developed. Compared with the traditional cooperative transmission protocols with single-user detection, in which the diversity gain is only for one source user, the proposed MUD cooperative transmission protocols have the merits that the improvement of one user's link can also benefit the other users. In addition, using MUD at the relay provides an environment in which network coding can be employed. The coding gain and high diversity order can be obtained by fully utilizing the link between the relay and the destination. From the analysis and simulation results, it is seen that the proposed protocols achieve higher diversity gain, better asymptotic efficiency, and lower bit error rate, compared to traditional MUD and to existing cooperative transmission protocols.Comment: to appear, in the proceedings of IEEE International Conference on Communications, Glasgow, Scotland, 24-28 June 200