Frequency Response of Graphene Electrolyte-Gated Field-Effect Transistors

This work develops the first frequency-dependent small-signal model for graphene electrolyte-gated field-effect transistors (EGFETs). Graphene EGFETs are microfabricated to measure intrinsic voltage gain, frequency response, and to develop a frequency-dependent small-signal model. The transfer function of the graphene EGFET small-signal model is found to contain a unique pole due to a resistive element, which stems from electrolyte gating. Intrinsic voltage gain, cutoff frequency, and transition frequency for the microfabricated graphene EGFETs are approximately 3.1 V/V, 1.9 kHz, and 6.9 kHz, respectively. This work marks a critical step in the development of high-speed chemical and biological sensors using graphene EGFETs.United States. Office of Naval Research (Grant N00014-12-1-0959)United States. Office of Naval Research (Grant N0014-16-1-2230)United States. National Aeronautics and Space Administration (Award NNX14AH11A)United States. Army Research Office (Contract W911NF-13-D-0001

Wideband Fully-Programmable Dual-Mode CMOS Analogue Front-End for Electrical Impedance Spectroscopy

This paper presents a multi-channel dual-mode CMOS analogue front-end (AFE) for electrochemical and bioimpedance analysis. Current-mode and voltage-mode readouts, integrated on the same chip, can provide an adaptable platform to correlate single-cell biosensor studies with large-scale tissue or organ analysis for real-time cancer detection, imaging and characterization. The chip, implemented in a 180-nm CMOS technology, combines two current-readout (CR) channels and four voltage-readout (VR) channels suitable for both bipolar and tetrapolar electrical impedance spectroscopy (EIS) analysis. Each VR channel occupies an area of 0.48 mm 2 , is capable of an operational bandwidth of 8 MHz and a linear gain in the range between -6 dB and 42 dB. The gain of the CR channel can be set to 10 kΩ, 50 kΩ or 100 kΩ and is capable of 80-dB dynamic range, with a very linear response for input currents between 10 nA and 100 μ A. Each CR channel occupies an area of 0.21 mm 2 . The chip consumes between 530 μ A and 690 μ A per channel and operates from a 1.8-V supply. The chip was used to measure the impedance of capacitive interdigitated electrodes in saline solution. Measurements show close matching with results obtained using a commercial impedance analyser. The chip will be part of a fully flexible and configurable fully-integrated dual-mode EIS system for impedance sensors and bioimpedance analysis

Interface Design for CMOS-Integrated Electrochemical Impedance Spectroscopy (EIS) Biosensors

Electrochemical Impedance Spectroscopy (EIS) is a powerful electrochemical technique to detect biomolecules. EIS has the potential of carrying out label-free and real-time detection, and in addition, can be easily implemented using electronic integrated circuits (ICs) that are built through standard semiconductor fabrication processes. This paper focuses on the various design and optimization aspects of EIS ICs, particularly the bio-to-semiconductor interface design. We discuss, in detail, considerations such as the choice of the electrode surface in view of IC manufacturing, surface linkers, and development of optimal bio-molecular detection protocols. We also report experimental results, using both macro- and micro-electrodes to demonstrate the design trade-offs and ultimately validate our optimization procedures

Energy Dissipation in Suspended Microchannel Resonators: theoretical, numerical and experimental validation

Suspended Microchannel Resonators (SMRs) are hollow resonant structures containing an embedded U-shaped microfluidic channel. Theoretical and experimental results have proved that in these devices the energy dissipation is a non-monotonic function of the fluid viscosity (or Reynolds number), while in conventional cantilevers it always increases with the viscosity as the damping from the fluid on the solid structure increases. In this project, both a Mathematica code and a FEM model are produced to validate the theoretical and experimental results on the energy dissipation in these devices. To reduce the computational effort an eigenvalue study is performed. The incompressible and compressible cases are investigated while changing the fluid and device characteristics. Our numerical model works fine where the experimental data are provided but it is in contrast with the theoretical model at low Reynolds number (high viscosities). We consider it valid in the region of interest and send to further investigation the difference at low Reynolds number between theory and numerics

Quantum dots-amplified electrochemical cytochrome P450 phenotype sensor for tamoxifen, a breast cancer drug

Philosophiae Doctor - PhDBreast cancer is regarded as the most common cancer in South Africa and its rate of occurrence is increasing. About one in every 31 South African women are at the risk of developing breast cancer and early diagnosis and treatment guarantee 90% survival rate. Tamoxifen is the drugs of choice for the treatment of all stages of breast cancer. The drug binds with estrogen receptor (ER) to minimize the transcription of estrogen dependent genes. However, nearly 50% of ER-positive breast cancer patients either become resistant or fail to respond to tamoxifen resulting in a serious clinical challenge in breast cancer management. The Grand Health Challenges of South Africa includes the development of cost effective diagnostic systems suitable for early detection of diseases and drug resistivity for timely invention and better patient management