Experimental Demonstration of Model Predictive Control in a Medium-Sized Commercial Building

This paper presents the implementation and experimental demonstration results of a practically effective and computationally efficient model predictive control (MPC) algorithm used to optimize the energy use of the heating, ventilation, and air-conditioning (HVAC) system in a multi-zone medium-sized commercial building. Advanced building control technologies are key enablers for intelligent operations of future buildings, however, adopting these technologies are quite difficult in practice mainly due to the cost-sensitive nature of the building industry. This paper presents the results of implementing optimization-based control algorithm and demonstrates the effectiveness of its energy-saving feature and improved thermal comfort along with lessons-learned. The performance of the implemented MPC algorithm was estimated relative to baseline days (heuristic-based control) with similar outdoor air temperature patterns during the cooling and shoulder seasons (September to November, 2013), and it was concluded that MPC reduced the total electrical energy consumption by more than 20% on average while improving thermal comfort in terms of temperature and maintaining similar zone CO2 levels

Advanced Occupancy Measurement Using Sensor Fusion

With roughly about half of the energy used in buildings attributed to Heating, Ventilation, and Air conditioning (HVAC) systems, there is clearly great potential for energy saving through improved building operations. Accurate knowledge of localised and real-time occupancy numbers can have compelling control applications for HVAC systems. However, existing technologies applied for building occupancy measurements are limited, such that a precise and reliable occupant count is difficult to obtain. For example, passive infrared (PIR) sensors commonly used for occupancy sensing in lighting control applications cannot differentiate between occupants grouped together, video sensing is often limited by privacy concerns, atmospheric gas sensors (such as CO2 sensors) may be affected by the presence of electromagnetic (EMI) interference, and may not show clear links between occupancy and sensor values. Past studies have indicated the need for a heterogeneous multi-sensory fusion approach for occupancy detection to address the short-comings of existing occupancy detection systems. The aim of this research is to develop an advanced instrumentation strategy to monitor occupancy levels in non-domestic buildings, whilst facilitating the lowering of energy use and also maintaining an acceptable indoor climate. Accordingly, a novel multi-sensor based approach for occupancy detection in open-plan office spaces is proposed. The approach combined information from various low-cost and non-intrusive indoor environmental sensors, with the aim to merge advantages of various sensors, whilst minimising their weaknesses. The proposed approach offered the potential for explicit information indicating occupancy levels to be captured. The proposed occupancy monitoring strategy has two main components; hardware system implementation and data processing. The hardware system implementation included a custom made sound sensor and refinement of CO2 sensors for EMI mitigation. Two test beds were designed and implemented for supporting the research studies, including proof-of-concept, and experimental studies. Data processing was carried out in several stages with the ultimate goal being to detect occupancy levels. Firstly, interested features were extracted from all sensory data collected, and then a symmetrical uncertainty analysis was applied to determine the predictive strength of individual sensor features. Thirdly, a candidate features subset was determined using a genetic based search. Finally, a back-propagation neural network model was adopted to fuse candidate multi-sensory features for estimation of occupancy levels. Several test cases were implemented to demonstrate and evaluate the effectiveness and feasibility of the proposed occupancy detection approach. Results have shown the potential of the proposed heterogeneous multi-sensor fusion based approach as an advanced strategy for the development of reliable occupancy detection systems in open-plan office buildings, which can be capable of facilitating improved control of building services. In summary, the proposed approach has the potential to: (1) Detect occupancy levels with an accuracy reaching 84.59% during occupied instances (2) capable of maintaining average occupancy detection accuracy of 61.01%, in the event of sensor failure or drop-off (such as CO2 sensors drop-off), (3) capable of utilising just sound and motion sensors for occupancy levels monitoring in a naturally ventilated space, (4) capable of facilitating potential daily energy savings reaching 53%, if implemented for occupancy-driven ventilation control

Internet of things (IoT) as sustainable development goals (SDG) enabling technology towards smart readiness indicators (SRI) for university buildings

Non-residential buildings contribute to around 20% of the total energy consumed in Europe. This consumption continues to increase globally. Smart building proposals (focused on Nearly Zero Energy Building (NZEB), air quality monitoring, energy saving with thermal comfort, etc.) were already necessary before 2020, and the pandemic has made this research and development area more essential. Furthermore, the need to meet the Sustainable Development Goals (SDG) and obtain technological solutions based on the Internet of Things (IoT) requires holistic contributions through real installations that serve as spaces for measuring, testing, study and research. This article proposes a “measure–analyse–decide and act” methodology to quantify the Smart Readiness Indicator (SRI) for university buildings as a reference environment for energy efficiency and COVID-19 prevention models. Two conceptual spaces (physical and digital) within two dimensions (users and infrastructures) are designated over an IoT three-level model (information acquisition, interoperable communication, and data-driven decision). An IoT ecosystem (sensoriZAR) was implemented as a proof-of-concept of a smart campus at the University of Zaragoza, Spain. Focused on CO2 and energy consumption monitoring, the results showed effectiveness through real installations, demonstrating the IoT potential as SDG-enabling technologies. These contributions allow not only experimental lab tests (from the authors’ expertise in several specialties of Industrial, Mechanical, Design, Thermal, Electrical, Electronic, Computer and Telecommunication Engineering) but also a reference model for direct application in academic works, research projects and institutional initiatives, extendable to professional environments, buildings and cities. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)