Enhancing an Embedded Processor Core with a Cryptographic Unit for Performance and Security

We present a set of low-cost architectural enhancements to accelerate the execution of certain arithmetic operations common in cryptographic applications on an extensible embedded processor core. The proposed enhancements are generic in the sense that they can be beneficially applied in almost any RISC processor. We implemented the enhancements in form of a cryptographic unit (CU) that offers the programmer an extended instruction set. The CU features a 128-bit wide register file and datapath, which enables it to process 128-bit words and perform 128-bit loads/stores. We analyze the speed-up factors for some arithmetic operations and public-key cryptographic algorithms obtained through these enhancements. In addition, we evaluate the hardware overhead (i.e. silicon area) of integrating the CU into an embedded RISC processor. Our experimental results show that the proposed architectural enhancements allow for a significant performance gain for both RSA and ECC at the expense of an acceptable increase in silicon area. We also demonstrate that the proposed enhancements facilitate the protection of cryptographic algorithms against certain types of side-channel attacks and present an AES implementation hardened against cache-based attacks as a case study

A survey of hardware implementations of elliptic curve cryptographic systems

Elliptic Curve Cryptography (ECC) has gained much recognition over the last decades and has established itself among the well known public-key cryptography schemes, not least due its smaller key size and relatively lower computational effort compared to RSA. The wide employment of Elliptic Curve Cryptography in many different application areas has been leading to a variety of implementation types and domains ranging from pure software approaches over hardware implemenations to hardware/software co-designs. The following review provides an overview of state of the art hardware implemenations of ECC, specifically in regard to their targeted design goals. In this context the suitability of the hardware/software approach in regard to the security challenges opposed by the low-end embedded devices of the Internet of Things is briefly examined. The paper also outlines ECC’s vulnerability against quantum attacks and references one possible solution to that problem

Optimization of Supersingular Isogeny Cryptography for Deeply Embedded Systems

Public-key cryptography in use today can be broken by a quantum computer with sufficient resources. Microsoft Research has published an open-source library of quantum-secure supersingular isogeny (SI) algorithms including Diffie-Hellman key agreement and key encapsulation in portable C and optimized x86 and x64 implementations. For our research, we modified this library to target a deeply-embedded processor with instruction set extensions and a finite-field coprocessor originally designed to accelerate traditional elliptic curve cryptography (ECC). We observed a 6.3-7.5x improvement over a portable C implementation using instruction set extensions and a further 6.0-6.1x improvement with the addition of the coprocessor. Modification of the coprocessor to a wider datapath further increased performance 2.6-2.9x. Our results show that current traditional ECC implementations can be easily refactored to use supersingular elliptic curve arithmetic and achieve post-quantum security

The Design Space of Ultra-low Energy Asymmetric Cryptography

The energy cost of asymmetric cryptography, a vital component of modern secure communications, inhibits its wide spread adoption within the ultra-low energy regimes such as Implantable Medical Devices (IMDs), Wireless Sensor Networks (WSNs), and Radio Frequency Identification tags (RFIDs). In literature, a plethora of hardware and software acceleration techniques exists for improving the performance of asymmetric cryptography. However, very little attention has been focused on the energy efficiency. Therefore, in this dissertation, I explore the design space thoroughly, evaluating proposed hardware acceleration techniques in terms of energy cost and showing how effective they are at reducing the energy per cryptographic operation. To do so, I estimate the energy consumption for six different hardware/software configurations across five levels of security, including both GF(p) and GF(2^m) computation. First, we design and evaluate an efficient baseline architecture for pure software-based cryptography, which is centered around a pipelined RISC processor with 256KB of program ROM and 16KB of RAM. Then, we augment our processor design with simple, yet beneficial instruction set extensions for GF(p) computation and evaluate the improvement in terms of energy per cryptographic operation compared to the baseline microarchitecture. While examining the energy breakdown of the system, it became clear that fetching instructions from program memory was contributing significantly to the overall energy consumption. Thus, we implement a parameterizable instruction cache and simulate various configurations. We determine that for our working set, the energy-optimal instruction cache is 4KB, providing a 25% energy improvement over the baseline architecture for a 192-bit key-size. Next, we introduce a reconfigurable GF(p) accelerator to our microarchitecture and mea sure the energy per operation against the baseline and the ISA extensions. For ISA extensions, we show between 1.32 and 1.45 factor improvement in energy efficiency over baseline, while for full acceleration we demonstrate a 5.17 to 6.34 factor improvement. Continuing towards greater efficiency, we investigate the energy efficiency of different arithmetic by first adding GF(2^m) instruction set extensions to our processor architecture and comparing them to their GF(p) counterpart. Finally, we design a non-configurable 163-bit GF(2^m) accelerator and perform some initial energy estimates, comparing them with our prior work. In the end, we discuss our ongoing research and make suggestions for future work. The work presented here, along with proposed future work, will aid in bringing asymmetric cryptography within reach of ultra-low energy devices

Generalised Mersenne Numbers Revisited

Generalised Mersenne Numbers (GMNs) were defined by Solinas in 1999 and feature in the NIST (FIPS 186-2) and SECG standards for use in elliptic curve cryptography. Their form is such that modular reduction is extremely efficient, thus making them an attractive choice for modular multiplication implementation. However, the issue of residue multiplication efficiency seems to have been overlooked. Asymptotically, using a cyclic rather than a linear convolution, residue multiplication modulo a Mersenne number is twice as fast as integer multiplication; this property does not hold for prime GMNs, unless they are of Mersenne's form. In this work we exploit an alternative generalisation of Mersenne numbers for which an analogue of the above property --- and hence the same efficiency ratio --- holds, even at bitlengths for which schoolbook multiplication is optimal, while also maintaining very efficient reduction. Moreover, our proposed primes are abundant at any bitlength, whereas GMNs are extremely rare. Our multiplication and reduction algorithms can also be easily parallelised, making our arithmetic particularly suitable for hardware implementation. Furthermore, the field representation we propose also naturally protects against side-channel attacks, including timing attacks, simple power analysis and differential power analysis, which is essential in many cryptographic scenarios, in constrast to GMNs.Comment: 32 pages. Accepted to Mathematics of Computatio

Whirlwind: a new cryptographic hash function

A new cryptographic hash function Whirlwind is presented. We give the full specification and explain the design rationale. We show how the hash function can be implemented efficiently in software and give first performance numbers. A detailed analysis of the security against state-of-the-art cryptanalysis methods is also provided. In comparison to the algorithms submitted to the SHA-3 competition, Whirlwind takes recent developments in cryptanalysis into account by design. Even though software performance is not outstanding, it compares favourably with the 512-bit versions of SHA-3 candidates such as LANE or the original CubeHash proposal and is about on par with ECHO and MD6

Efficient Algorithms for Finite Fields, with Applications in Elliptic Curve Cryptography

This thesis introduces a new tower field representation, optimal tower fields (OTFs), that facilitates efficient finite field operations. The recursive direct inversion method presented for OTFs has significantly lower complexity than the known best method for inversion in optimal extension fields (OEFs), i.e., Itoh-Tsujii\u27s inversion technique. The complexity of OTF inversion algorithm is shown to be O(m^2), significantly better than that of the Itoh-Tsujii algorithm, i.e. O(m^2(log_2 m)). This complexity is further improved to O(m^(log_2 3)) by utilizing the Karatsuba-Ofman algorithm. In addition, it is shown that OTFs are in fact a special class of OEFs and OTF elements may be converted to OEF representation via a simple permutation of the coefficients. Hence, OTF operations may be utilized to achieve the OEF arithmetic operations whenever a corresponding OTF representation exists. While the original OTF multiplication and squaring operations require slightly more additions than their OEF counterparts, due to the free conversion, both OTF operations may be achieved with the complexity of OEF operations. Furthermore, efficient finite field algorithms are introduced which significantly improve OTF multiplication and squaring operations. The OTF inversion algorithm was implemented on the ARM family of processors for a medium and a large sized field whose elements can be represented with 192 and 320 bits, respectively. In the implementation, the new OTF inversion algorithm ran at least six to eight times faster than the known best method for inversion in OEFs, i.e., Itoh-Tsujii inversion technique. According to the implementation results obtained, it is indicated that using the OTF inversion method an elliptic curve scalar point multiplication operation can be performed at least two to three times faster than the known best implementation for the selected fields