Reactivity controlled compression ignition engine: Pathways towards commercial viability

© 2020 Elsevier Ltd. All rights reserved. This manuscript is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence (http://creativecommons.org/licenses/by-nc-nd/4.0/).Reactivity-controlled compression ignition (RCCI) is a promising energy conversion strategy to increase fuel efficiency and reduce nitrogen oxide (NOx) and soot emissions through improved in-cylinder combustion process. Considering the significant amount of conducted research and development on RCCI concept, the majority of the work has been performed under steady-state conditions. However, most thermal propulsion systems in transportation applications require operation under transient conditions. In the RCCI concept, it is crucial to investigate transient behavior over entire load conditions in order to minimize the engine-out emissions and meet new real driving emissions (RDE) legislation. This would help further close the gap between steady-state and transient operation in order to implement the RCCI concept into mass production. This work provides a comprehensive review of the performance and emissions analyses of the RCCI engines with the consideration of transient effects and vehicular applications. For this purpose, various simulation and experimental studies have been reviewed implementing different control strategies like control-oriented models particularly in dual-mode operating conditions. In addition, the application of the RCCI strategy in hybrid electric vehicle platforms using renewable fuels is also discussed. The discussion of the present review paper provides important insights for future research on the RCCI concept as a commercially viable energy conversion strategy for automotive applications.Peer reviewe

Analysis and Control of Multimode Combustion Switching Sequence.

Highly dilute, low temperature combustion technologies, such as homogeneous charge compression ignition (HCCI), show significant improvements in internal combustion engine fuel efficiency and engine-out NOx emissions. These improvements, however, occur at limited operating range and conventional spark ignition (SI) combustion is still required to fulfill the driver's high torque demands. In consequence, such multimode engines involve discrete switches between the two distinct combustion modes. Such switches unfortunately require a finite amount of time, during which they exhibit penalties in efficiency. Along with its challenges, the design of such a novel system offers new degrees of freedom in terms of engine and aftertreatment specifications. Prior assessments of this technology were based on optimistic assumptions and neglected switching dynamics. Furthermore, emissions and driveability were not fully addressed. To this end, a comprehensive simulation framework, which accounts for above-mentioned penalties and incorporates interactions between multimode engine, driveline, and three-way catalyst (TWC), has been developed. Experimental data was used to parameterize a novel mode switch model, formulated as finite-state machine. This model was combined with supervisory controller designs, which made the switching decision. The associated drive cycle results were analyzed and it was seen that mode switches have significant influence on overall fuel economy, and the issue of drivability needs to be addressed within the supervisory strategy. After expanding the analysis to address emissions assuming a TWC, it was shown that, in practice, HCCI operation requires the depletion of the TWC's oxygen storage capacity (OSC). For large OSCs the resulting lean-rich cycling nullifies HCCI's original efficiency benefits. In addition, future emissions standards are still unlikely to be fulfilled, deeming a system consisting of such a multimode engine and TWC with generous OSC unfavorable. In view of these difficulties, the modeling framework was extended to a mild hybrid electric vehicle (HEV) allowing a prolonged operation in HCCI mode with associated fuel economy benefits during city driving. Further analysis on how to reduce NOx while maintaining fuel economy resulted in a counterintuitive suggestion. It was deemed beneficial to constrain the HCCI operation to a small region, exhibiting lowest NOx, while reducing instead of increasing the OSC.PhDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116660/1/snuesch_1.pd

Performance and emissions of a series hybrid vehicle powered by a gasoline partially premixed combustion engine

[EN] This work evaluates the performance and emissions of the series hybrid vehicle concept powered by a gasoline partially premixed internal combustion engine. To do so, experimental data was collected from a Volvo VED-D4 Euro 6 four-cylinder compression ignition engine running under gasoline partially premixed combustion. Two series hybrid vehicle models were developed in GT-Power (R), which were fed with the experimental data to evaluate the potential of the hybrid concept. First of all, the battery charging strategy of the hybrid vehicles was optimized in terms of number of power levels and operating conditions. For this, a design of experiments was performed in GT-Power (R), which enabled to obtain a predictive model of the performance and emissions. The predictive model was used to obtain the optimized NOx-fuel consumption Pareto frontiers for each charging strategy proposed. Finally, the GT-Power (R) vehicle models were run with the optimal operating conditions (selected from each Pareto) in both the new European driving cycle and worldwide harmonized light vehicles test cycle. The results show that the hybrid powertrain running with partially premixed combustion is able to achieve similar or better performance than the commercial diesel vehicle with low engine-out emissions. Moreover, comparing the results from both vehicles, it was confirmed that the hybridization results in better improvements when applied to urban traffic than for highway conditions where the power request is higher and the potential for regenerative braking is reduced.The authors gratefully acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R). The authors also gratefully acknowledge the KCFP Engine Research Center (Swedish Energy Agency grant number 22485-4) for partial support of this research.García Martínez, A.; Monsalve-Serrano, J.; Lago-Sari, R.; Dimitrakopoulos, N.; Turnér, M.; Tunestål, P. (2019). Performance and emissions of a series hybrid vehicle powered by a gasoline partially premixed combustion engine. Applied Thermal Engineering. 150:564-575. https://doi.org/10.1016/j.applthermaleng.2019.01.035S56457515

PHYSICS-BASED MODELING AND CONTROL OF POWERTRAIN SYSTEMS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES

Low Temperature Combustion (LTC) holds promise for high thermal efficiency and low Nitrogen Oxides (NOx) and Particulate Matter (PM) exhaust emissions. Fast and robust control of different engine variables is a major challenge for real-time model-based control of LTC. This thesis concentrates on control of powertrain systems that are integrated with a specific type of LTC engines called Homogenous Charge Compression Ignition (HCCI). In this thesis, accurate mean value and dynamic cycleto- cycle Control Oriented Models (COMs) are developed to capture the dynamics of HCCI engine operation. The COMs are experimentally validated for a wide range of HCCI steady-state and transient operating conditions. The developed COMs can predict engine variables including combustion phasing, engine load and exhaust gas temperature with low computational requirements for multi-input multi-output realtime HCCI controller design. Different types of model-based controllers are then developed and implemented on a detailed experimentally validated physical HCCI engine model. Control of engine output and tailpipe emissions are conducted using two methodologies: i) an optimal algorithm based on a novel engine performance index to minimize engine-out emissions and exhaust aftertreatment efficiency, and ii) grey-box modeling technique in combination with optimization methods to minimize engine emissions. In addition, grey-box models are experimentally validated and their prediction accuracy is compared with that from black-box only or clear-box only models. A detailed powertrain model is developed for a parallel Hybrid Electric Vehicle (HEV) integrated with an HCCI engine. The HEV model includes sub-models for different HEV components including Electric-machine (E-machine), battery, transmission system, and Longitudinal Vehicle Dynamics (LVD). The HCCI map model is obtained based on extensive experimental engine dynamometer testing. The LTC-HEV model is used to investigate the potential fuel consumption benefits archived by combining two technologies including LTC and electrification. An optimal control strategy including Model Predictive Control (MPC) is used for energy management control in the studied parallel LTC-HEV. The developed HEV model is then modified by replacing a detailed dynamic engine model and a dynamic clutch model to investigate effects of powertrain dynamics on the HEV energy consumption. The dynamics include engine fuel flow dynamics, engine air flow dynamics, engine rotational dynamics, and clutch dynamics. An enhanced MPC strategy for HEV torque split control is developed by incorporating the effects of the studied engine dynamics to save more energy compared to the commonly used map-based control strategies where the effects of powertrain dynamics are ignored. LTC is promising for reduction in fuel consumption and emission production however sophisticated multi variable engine controllers are required to realize application of LTC engines. This thesis centers on development of model-based controllers for powertrain systems with LTC engines

Diesel low temperature combustion: an experimental study

Diesel engine emissions of oxides of nitrogen and particulate matter can be reduced simultaneously through the use of high levels of exhaust gas recirculation (EGR) to achieve low temperature combustion (LTC). Although the potential benefits of diesel LTC are clear, the main challenges to its practical implementation are the requirement of EGR levels that can exceed 60%, high fuel consumption, and high unburned hydrocarbon and carbon monoxide emissions. These limit the application of LTC to medium loads. In order to implement the LTC strategy in a passenger vehicle engine, a transition to conventional diesel operation is required to satisfy the expected high load demands on the engine. The investigation presented in this thesis was therefore aimed at improving the viability of the high-EGR LTC strategy for steady-state and transient operation. An experimental investigation was carried out on a single cylinder high-speed direct injection diesel engine. This thesis presents research on engine in-cylinder performance and engine-out gaseous and particulate emissions at operating conditions (i.e. EGR rate, intake pressure, fuel quantity, injection pressure) likely to be encountered by an engine during transient and steady-state operation. At selected operating points, further investigation in terms of in-cylinder spray and combustion visualization, flame temperature and soot concentration measurements provided deeper insight into the combustion and emissions phenomena. Increased intake pressure at single injection high-EGR LTC operation was investigated as a strategy to reduce the emissions of partial combustion by-products and to improve fuel economy. The higher intake pressure, although effective in reducing partial combustion by-products emissions and improving fuel economy, increased the EGR requirement to achieve LTC. A split fuel injection strategy with advanced injection timing on the other hand was effective in reducing the EGR requirement for LTC from 62% with single injection to 52% with split injections at 120 kPa (absolute) intake pressure. Unburned hydrocarbon emissions and fuel economy were particularly sensitive to intake oxygen mass fraction, and injection and dwell timings with the split injection strategy. In-cylinder soot formation and oxidation mechanisms with the split injection strategy were found to be significantly different from the single injection high-EGR LTC case. Transient simulation of an engine during combustion mode transition identified engine operating parameters on a cycle-by-cycle basis. Steady-state investigation of these test conditions provided significant insight into the combustion conditions and their effect on emissions and performance. The results from this thesis demonstrated the importance of optimizing both the air handling system performance and the fuel injection system during engine transients. The increased emissions and impaired performance due to slow response of the EGR and turbocharger systems during transitions to and from LTC modes can in part be mitigated through split injections optimized for the specific transient point. This provides a clear direction for engine developers to pursue in optimizing engine calibration when running with LTC-conventional diesel dual-mode strategies

A Novel Fuel Performance Index for Low-Temperature Combustion Engines Based on Operating Envelopes in Light-Duty Driving Cycle Simulations

Low-temperature combustion (LTC) engine concepts such as homogeneous charge compression ignition (HCCI) offer the potential of improved efficiency and reduced emissions of NOₓ and particulates. However, engines can only successfully operate in HCCI mode for limited operating ranges that vary depending on the fuel composition. Unfortunately, traditional ratings such as octane number poorly predict the autoignition behavior of fuels in such engine modes, and metrics recently proposed for HCCI engines have areas of improvement when wide ranges of fuels are considered. In this study, a new index for ranking fuel suitability for LTC engines was defined, based on the fraction of potential fuel savings achieved in the FTP-75 light-duty vehicle driving cycle. Driving cycle simulations were performed using a typical light-duty passenger vehicle, providing pairs of engine speed and load points. Separately, single-zone naturally aspirated HCCI engine simulations were performed for a variety of fuels in order to determine the operating envelopes for each. These results were combined to determine the varying improvement in fuel economy offered by fuels, forming the basis for a fuel performance index. Results showed that, in general, lower octane fuels performed better, resulting in higher LTC fuel index values; however, octane number alone did not predict fuel performance

Addressing the influence of carbon monoxide on the behavior of an HCCI engine

Homogeneous Charge Compression Ignition (HCCI) may be the next leap of improvement to internal combustion engines due to its decreased emissions and improved engine efficiencies. However, such a jump possesses challenges owing to its strict reliance on the inherent physics that dictate start of combustion and limit the reach of stable operation. This work investigates the role and fundamental influence of carbon monoxide on the cycle-to-cycle combustion dynamics present in the region of incomplete combustion that frames the limited HCCI operating region. An improved understanding will open doors to enhanced control methodologies and an expanded stable operating envelope. A constant volume chemical kinetics simulation was developed utilizing an established skeletal PRF mechanism in order to predict product species evolution in an HCCI engine under incomplete combustion conditions. The predicted product species amounts were harnessed to determine internally trapped residual carbon monoxide mass amounts that would be carried to the next engine cycle. These amounts became the basis for an experimental investigation on a single cylinder HCCI engine running on a high octane primary reference fuel. Cyclically resolved, in-cylinder active-specie injections were employed at partial burn operation to explore the effects of carbon monoxide on engine performance and its resultant cyclic dynamics. Observations made through detailed cyclic performance data, return maps, and symbol sequencing analysis help to expose a significant impact of carbon monoxide on HCCI combustion development and the potential it may possess to drive HCCI combustion as a future dynamic control mechanism --Abstract, page iii

Study of the Potential of Electrified Powertrains with Dual-Fuel Combustion to Achieve the 2025 Emissions Targets in Heavy-Duty Applications

[ES] El transporte de personas, así como de carga ha evolucionado y crecido tremendamente en los últimos años. El desarrollo tecnológico debió ser adaptado a las diferentes medidas gubernamentales en términos de control de emisiones contaminantes. Desde el acuerdo de Paris en 2015 para mantener el crecimiento de la temperatura global por debajo de 1.5oC, se han impuesto también límites para las emisiones de CO2 por parte de vehículos de carretera. Para el sector del transporte pesado, se han impuesto límites de flota de 15% para 2025 y 30% para 2030 de reducción del CO2 con respecto a 2019. Por lo tanto, esta doble restricción de muy bajos niveles de emisiones contaminantes, así como de gases de efecto invernadero hacen que el sector del transporte este ante un gran desafío tecnológico. En 2022, el transporte de carga tiene un 99% de vehículos propulsados a motor de combustión interna con Diesel como combustible y sin ningún tipo de ayuda eléctrica en el sistema de propulsión. Los límites de emisiones contaminantes como Euro 6 son alcanzados con complejos sistemas de postratamiento que además agregan el consumo de Urea. Trabajos previos en la bibliografía, así como sistemas prototipo han demostrado que es posible alcanzar los objetivos de emisiones contaminantes con métodos avanzados de control de la combustión y así disminuyendo la complejidad del post tratamiento en la salida de gases. Con mayor éxito, el concepto de Reactivity Controlled Combustion Ignition puede alcanzar valores por debajo de Euro 6 con eficiencia similar a la combustión de Diesel. Sin embargo, no soluciona los problemas de emisiones de CO2. Por otro lado, en vehículos de pasajeros fue demostrado con suceso la aplicación de motores eléctricos en el sistema de propulsión para mejorar la eficiencia global del vehículo. El caso extremo son los vehículos puramente electicos donde se alcanza eficiencias por arriba del 70% contra 35% de los vehículos no electrificados. Sin embargo, limitaciones de autonomía, tiempo de carga y la no clara reducción global de la contaminación debido a las emisiones de la energía de la red eléctrica y la contaminación de las baterías de ion-litio hacen que este sistema de propulsión este bajo discusión. Para los vehículos con algún grado de electrificación, las emisiones de gases contaminantes siguen siendo un problema como para el caso no electrificado. Por lo tanto, esta tesis doctoral aborda el problema de emisiones contaminantes, así como de CO2 combinado modos avanzados de combustión con sistemas de propulsión electrificado. La aplicación de estas tecnologías se centra en el sector del transporte de carretera pesado. En particular, un camión de 18 toneladas de carga máxima que originalmente en 2022 equipa un motor seis cilindros de 8 litros con combustión convencional Diesel. El presente trabajo utiliza herramientas experimentales como son medidas en banco motor, así como en carretera para alimentar y validar modelos numéricos de motor, sistema de postratamiento, así como de vehículo. Este último es el punto central del trabajo ya que permite abordar sistemas como el mild hybrid, full hybrid y plug-in hybrid. Calibración de motor experimental dedicada a sistemas de propulsión hibrido es presentada con combustibles sintéticos y/o para llegar a los límites de Euro 7.[CA] El transport de persones, així com de càrrega ha evolucionat i crescut tremendament en els últims anys. El desenvolupament tecnològic degué ser adaptat a les diferents mesures governamentals en termes de control d'emissions contaminants. Des de l'acord de Paris en 2015 per a mantindre el creixement de la temperatura global per davall de 1.5oC, s'han imposat també límits per a les emissions de CO¿ per part de vehicles de carretera. Per al sector del transport pesat, s'han imposat limites de flota de 15% per a 2025 i 30% per a 2030 de reducció del CO¿ respecte a 2019. Per tant, aquesta doble restricció de molt baixos nivells d'emissions contaminants, així com de gasos d'efecte d'hivernacle fan que el sector del transport aquest davant un gran desafiament tecnològic. En 2022, el transport de càrrega té un 99% de vehicles propulsats a motor de combustió interna amb Dièsel com a combustible i sense cap mena d'ajuda elèctrica en el sistema de propulsió. Els limites d'emissions contaminants com a Euro 6 són aconseguits amb complexos sistemes de posttractament que a més agreguen el consum d'Urea. Treballs previs en la bibliografia, així com sistemes prototip han demostrat que és possible aconseguir els objectius d'emissions contaminants amb mètodes avançats de control de la combustió i així disminuint la complexitat del post tractament en l'eixida de gasos. Amb major èxit, el concepte de Reactivity Controlled Combustion Ignition pot aconseguir valors per davall d'Euro 6 amb eficiència similar a la combustió de Dièsel. No obstant això, no soluciona els problemes d'emissions de CO¿. D'altra banda, en vehicles de passatgers va ser demostrat amb succés l'aplicació de motors elèctrics en el sistema de propulsió per a millorar l'eficiència global del vehicle. El cas extrem són els vehicles purament electicos on s'aconsegueix eficiències per dalt del 70% contra 35% dels vehicles no electrificats. No obstant això, limitacions d'autonomia, temps de càrrega i la no clara reducció global de la contaminació a causa de les emissions de l'energia de la xarxa elèctrica i la contaminació de les bateries d'ió-liti fan que aquest sistema de propulsió aquest baix discussió. Per als vehicles amb algun grau d'electrificació, les emissions de gasos contaminants continuen sent un problema com per al cas no electrificat. Per tant, aquesta tesi doctoral aborda el problema d'emissions contaminants, així com de CO¿ combinat maneres avançades de combustió amb sistemes de propulsió electrificat. L'aplicació d'aquestes tecnologies se centra en el sector del transport de carretera pesat. En particular, un camió de 18 tones de càrrega màxima que originalment en 2022 equipa un motor sis cilindres de 8 litres amb combustió convencional Dièsel. El present treball utilitza eines experimentals com són mesures en banc motor, així com en carretera per a alimentar i validar models numèrics de motor, sistema de posttractament, així com de vehicle. Est ultime és el punt central del treball ja que permet abordar sistemes com el mild hybrid, full *hybrid i plug-in hybrid. Calibratge de motor experimental dedicada a sistemes de propulsió hibride és presentada amb combustibles sintètics i/o per a arribar als límits d'Euro 7.[EN] The transport of people, as well as cargo, has evolved and grown tremendously over the recent years. Technological development had to be adapted to the different government measures for controlling polluting emissions. Since the Paris agreement in 2015 limits have also been imposed on the CO2 emissions from road vehicles to keep global temperature growth below 1.5oC. For the heavy transport sector, fleet limits of 15% for 2025 and 30% for 2030 CO2 reduction have been introduced with respect to the limits of 2019. Therefore, the current restriction of very low levels of polluting emissions, as well as greenhouse gases, makes the transport sector face a great technological challenge. In 2021, 99% of freight transport was powered by an internal combustion engine with Diesel as fuel and without any type of electrical assistance in the propulsion system. Moreover, polluting emission limits such as the Euro 6 are achieved with complex post-treatment systems that also add to the consumption of Urea. Previous research and prototype systems have shown that it is possible to achieve polluting emission targets with advanced combustion control methods, thus reducing the complexity of post-treatment in the exhaust gas. With greater success, the concept of Reactivity Controlled Combustion Ignition can reach values below the Euro 6 with similar efficiency to Diesel combustion. Unfortunately, it does not solve the CO2 emission problems. On the other hand, in passenger vehicles, the application of electric motors in the propulsion system has been shown to successfully improve the overall efficiency of the vehicle. The extreme case is the purely electric vehicles, where efficiencies above 70% are achieved against 35% of the non-electrified vehicles. However, limitations of vehicle range, charging time, payload reduction and an unclear overall reduction in greenhouse emissions bring this propulsion system under discussion. For vehicles with some degree of electrification, polluting gas emissions continue to be a problem as for the non-electrified case. Therefore, this doctoral Thesis addresses the problem of polluting emissions and CO2 combined with advanced modes of combustion with electrified propulsion systems. The application of these technologies focuses on the heavy road transport sector. In particular, an 18-ton maximum load truck that originally was equipped with an 8-liter six-cylinder engine with conventional Diesel combustion. The present work uses experimental tools such as measurements on the engine bench as well as on the road to feed and validate numerical models of the engine, after-treatment system, and the vehicle. The latter is the central point of the work since it allows addressing systems such as mild hybrid, full hybrid, and plug-in hybrid. Experimental engine calibration dedicated to hybrid propulsion systems is presented with synthetic fuels in order to reach the limits of the Euro 7.This Doctoral Thesis has been partially supported by the Universitat Politècnica de València through the predoctoral contract of the author (Subprograma 2), which is included within the framework of Programa de Apoyo para la Investigación y Desarrollo (PAID)Martínez Boggio, SD. (2022). Study of the Potential of Electrified Powertrains with Dual-Fuel Combustion to Achieve the 2025 Emissions Targets in Heavy-Duty Applications [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/18883

An experimental study of low-temperature combustion in a diesel engine

Increased efficiency and reduced emissions demands from users and legislative organisations have lead to the development of advanced combustion technologies for diesel engines. Exhaust gas recirculation (EGR) is a widely used technology to control diesel combustion and emissions, primarily to reduce emissions of oxides of nitrogen (NOx). Implementation of high levels of EGR (> 50%) is able to simultaneously reduce both emissions of NOx and particulate matter (PM) to ultra low levels. However, high EGR combustion is subject to reduced combustion efficiency and stability with increased total hydrocarbon (THC) and carbon monoxide (CO) emissions. This thesis presents research into low temperature diesel combustion (LTC) operation and the effects on combustion and emissions when the engine is operated under air, fuel and EGR rates encountered during transitions between LTC and conventional diesel operation modes. This has resulted in an improved understanding of the diesel combustion process and pollutant emissions with high rates of EGR, different fuel injection pressures and timings, post fuel injection and exhaust back pressures. The sensitivity of LTC to variations in engine speed, fuel injection quantity, and EGR rate and intake manifold temperature were investigated. Pseudo-transient operation of the engine was studied to interpret the transient performance of a diesel engine during transients within LTC and from LTC to conventional diesel combustion in a new European driving-cycle (NEDC) test. Experimental investigations were conducted on a single cylinder research diesel engine. Cylinder pressure, fuel consumption and gaseous and particulate emissions (filter smoke number, size distribution, and total number) were measured. The results showed that an increase in EGR rate can realise LTC on the research engine. Fuel injection parameters influenced the combustion phasing, and control of this was able to improve the combustion stability and to reduce the THC and CO emissions. The low smoke number for the LTC diesel combustion was a result of reduced mean particle size with possible changes in particulate composition. EGR is the most critical parameter influencing the LTC combustion and emissions. Transient simulation of an engine exhibits significant discrepancies in EGR rate and boost pressure. Pseudo-transient points at intermediate load condition showed significantly increased emissions, particularly smoke number. Retarded fuel injection timing and increased boost pressure were demonstrated to be an effective strategy to reduce smoke emissions for these pseudo-transient operating points

A RCCI operational limits assessment in a medium duty compression ignition engine using an adapted compression ratio

Reactivity Controlled Compression Ignition concept offers an ultra-low nitrogen oxide and soot emissions with a high thermal efficiency. This work investigates the capabilities of this low temperature combustion concept to work on the whole map of a medium duty engine proposing strategies to solve its main challenges. In this sense, an extension to high loads of the concept without exceeding mechanical stress as well as a mitigation of carbon oxide and unburned hydrocarbons emissions at low load together with a fuel consumption penalty have been identified as main Reactivity Controlled Compression Ignition drawbacks. For this purpose, a single cylinder engine derived from commercial four cylinders medium-duty engine with an adapted compression ratio of 12.75 is used. Commercial 95 octane gasoline was used as a low reactivity fuel and commercial diesel as a high reactivity fuel. Thus, the study consists of two different parts. Firstly, the work is focused on the development and evaluation of an engine map trying to achieve the maximum possible load without exceeding a pressure rise rate of 15 bar/CAD. The second part holds on improving fuel consumption and carbon oxide and unburned hydrocarbons emissions at low load. Results suggest that it is possible to achieve up to 80% of nominal conventional diesel combustion engine load without overpassing the constraints of pressure rise rate (below 15 bar/CAD) and maximum pressure peak (below 190 bar) while obtaining ultra-low levels of nitrogen oxide and soot emissions. Regarding low load challenges, it has developed a particular methodology sweeping the gasoline-diesel blend together with intake temperature or exhaust gas recirculation maintaining constant the combustion phasing and ultra-low nitrogen oxide and soot emissions. As a result a drastic decrease carbon oxide and unburned hydrocarbons emissions is obtained with a slight fuel consumption improvement.The authors would like to thank VOLVO Group Trucks Technology for supporting this research.Benajes Calvo, JV.; Pastor Soriano, JV.; García Martínez, A.; Boronat-Colomer, V. (2016). A RCCI operational limits assessment in a medium duty compression ignition engine using an adapted compression ratio. Energy Conversion and Management. 126:497-508. doi:10.1016/j.enconman.2016.08.023S49750812