Pedestrians effects on indoor MIMO-OFDM channel capacity

Temporal variations caused by pedestrian movement can significantly affect the channel capacity of indoor MIMOOFDM wireless systems. This paper compares systematic measurements of MIMO-OFDM channel capacity in presence of pedestrians with predicted MIMO-OFDM channel capacity values using geometric optics-based ray tracing techniques. Capacity results are presented for a single room environment using 5.2 GHz with 2x2, 3x3 and 4x4 arrays as well as a 2.45 GHz narrowband 8x8 MIMO array. The analysis shows an increase of up to 2 b/s/Hz on instant channel capacity with up to 3 pedestrians. There is an increase of up to 1 b/s/Hz in the average capacity of the 4x4 MIMO-OFDM channel when the number of pedestrians goes from 1 to 3. Additionally, an increment of up to 2.5 b/s/Hz in MIMO-OFDM channel capacity was measured for a 4x4 array compared to a 2x2 array in presence of pedestrians. Channel capacity values derived from this analysis are important in terms of understanding the limitations and possibilities for MIMO-OFDM systems in indoor populated environments

Polarimetric properties of indoor MIMO channels for different floor levels in a residential house

This paper analyzes polarimetric characteristics of power delay profiles (PDPs), cross polarization discrimination (XPD), and received power of specular and diffuse multipath components of indoor MIMO radio channels at 2.45 GHz. Measurements were done in a residential house at two floors levels: "same floor" and "cross floor". Variations of 5 to 15 dB in PDPs between co-and cross-polar links were found in the same floor level; however these changes decrease as radio links move from line-of-sight to non-line-of-sight propagations. XPDs of radio waves were found to be higher for cross floor configuration, about 5 dB in horizontally and 7 dB in vertically polarized waves. Also, diffuse components of channels were less affected compared to that of specular components in same floor setups for cross-polar links. Our results demonstrate that the contribution of diffuse components to total channel power is higher than previously presented studies for large industrial indoor environments